Zps, A.S., Zlín VMC 1260 E Machining center - vertical

Manufacturer Zps, a.s., zlín
Model VMC 1260 E
Year
Location Czech Republic CZ
Category Machining centers - vertical
Product id P80530184

Price on request

Contact the seller

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type Reseller
Active since 2019
Offers online 132
Last activity Oct. 23, 2020

Specifications

Axis X 1270 mm
Axis Y 610 mm
Axis Z 760 mm
Rotary table (4th axis) no
Table length 1450 mm
Table width 590 mm
Max. part weight 1350 kg
-------------------
Length x width x height 4700.0 × 2920.0 × 3450.0
Weight 8000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

working stroke:
- Axis x (work table) 1270 mm
- Y axis (cross support) 610 mm
- Z axis (headstock) 760 mm
distance:
- spindle face from table 150-190 mm
- Spindle axis from the 635 mm rack
- 910 mm floor worktop
feeds:
- Working feeds in X, Y, Z axes 0-8 m / min
- Programmable up to 20 m / min
- Rapid traverse on the X, Y, Z 20 mm axis
accuracy:
- Measuring system in the X, Y, Z axis indirect
- Measurement and evaluation according to VDI / DGQ 3441
- precision of X, Y, Z 0.010 mm axis positioning
- Repeated X, Y, Z 0.008 mm precision
- measurement and evaluation according to JIS B 6336 standard
- X, Y, Z + -0.003 mm positioning accuracy
- Repeated accuracy on the X, Y, Z + - 0.002 mm axis
desk:
- work area 1450x590 mm
- Number of T grooves x width 5x18 mm
- Medium groove dimension 18 H6 mm
- centering hole diameter dia. 30 H6 mm
- groove pitch 125 mm
- Max load 1350 kg
- Max workpiece dimensions at max tool length 300 mm 1016x590x300 mm
spindle:
- Speed ​​range:
- Lower range 0-1250 rpm.
- Higher range 1251-5000 rpm.
- torque transmission with a two-stage planetary gearbox
- Spindle diameter in the front bearing 90 mm
- ISO 50 clamping tape
- electrical positioning
tool tray:
- tool holder 50-A / DIN 69 871-1
- clamping pin 50-A / DIN 69 872
- Number of tools in the magazine / machine 16/32
- exchange time - tool tool 8 s
- Searching the tool bidirectionally
- max tool diameter:
- when the tray is fully loaded, 130 mm
- 220 mm omitted
- max tool length 300 mm
- max. tool weight 8 kg
- Max. weight of all tools in one 108 kg container
Drives:
- spindle:
- Continuous output 18.5 kW
- Overload power (S6 - 30 min) 22 kW
- rated speed 1500 rpm.
- Maximum torque 208 Nm
- Maximum torque at overload 286 Nm
- feeds:
- Nominal torque in the X, Y axis 18.6 Nm
- Z-axis nominal torque 28.4 Nm
- nominal speed in the X, Y, Z axis 1500 rpm.
- axial force in the X axis, Y 10500 N
axial force in the Z axis 17500 N
lubricating aggregate:
- tank capacity 1.5 l
- pump:
- engine power 0,003 kW
- Rated speed of 3200 rpm.
- quantity delivered 0,005 l / 30 min.
coolant unit:
- volume (depending on the options used):
- 420 l tanks
- 150l chips
- 55 l chip conveyor
- 140 l filter units
- Tool cooling pump:
- engine power of 1.14 kW
- rated speed 3450 rpm.
- Delivery rate 50 l / min.
- pump for rinsing telescopic covers
- engine power 1.6 kW
- rated speed 3450 rpm.
- Delivery rate 100 l / min.
air device:
- Inlet air pressure 0.55-0.65 MPa
- Air consumption approx. 6 m3 / hour.
- the volume of oil in the 0.1 l air-lubrication tank
- volume of 0.3 l multiplier buffer tank
requirements for electricity.
- rated mains voltage 3x230 V / 60 Hz
- Operating power 27 kVA
- power installed 35 kW
- 100 A full load current
the ACRAMATIC A 2100 control system
additional information:
- Floor area of ​​the machine 3200x2120 mm
- Ground plan area with open door 4730x2920 mm
- max. floor plan area 4700x2920 mm
- hole width in the lids with 1110 mm open door
- Maximum working height of the machine 3450 mm
- machine weight (without coolant tank and chip conveyor) 8000 kg
- Weight of the coolant tank with pumps (without liquid) 210 kg
- Chip conveyor weight 260 kg
- the mass of 90 kg chips
- weight of the 80 kg filter unit
Price by agreement.

Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Share

Contact the seller