Specifications

Capacity units/hour 330 u/h
Type of caps Twist Off
Type Automatic
-------------------
Length x width x height 18000.0 × 10000.0 × 3000.0
Worked hours 7200 hours
Hours under power 10000 hours
State like new
At local norms ---------
Status in production

Description

High Speed Twist Off Cap Production Line

Capacity: 330 caps/min
Double dies on press and 2 Forming & Lining Combination Machines

- Automatic Feeding System
CNC feeding platform, automatic feeding device, double sheet sensor, punch press platform,
hydraulic lifting table and accessoriies, oil rolling to feeding, Panasonic control system,
10' colorful human machine interface, CNC 3-axis Panasonic servomotors system,
automatic waste collecting device
Feeding speed: 50-180 times/min (consistent with press)
Suitable sheet thickness: 0,1-0,5 mm
Allowed package of tinplate: 2,5 ton max
Detecting: Clamp, caps or can out, double sheets
Air supply: 6 bar
Power: 3 phases 4 wire, AC380, <7kW

- 65T Gantry Press (Double Die) - Yangli Brand
Nominal Force: 630 kN
Nominal Stroke: 3 mm
Slide Block Stroke: 105 mm
Max Stroke Times: 160-210 times/min x2
Max Die Set Height: 360 mm
Max Die Set Adjust Height: 20 mm
Bolster: 320*1200*100 mm
Slide Area: 350*800 mm
Main Motor Power: 11 kW
Dimension: 3500*1550*3200 mm
Weight: 11T

- Dies
Double Die in 65T Gantry Press for 82 mm
Double Die in 65T Gantry Press for 63 mm
Double Die in 65T Gantry Press for 43 mm

- Conveyor
Horizontal conveyor between press and magnetic vertical conveyor for 63 mm and 82 mm
Conveyor between magnetic vertical conveyor and Forming & Lining Combination Machine for 63 mm and 82 mm
Horizontal conveyor between press and magnetic vertical conveyor for 43 mm
Conveyor between magnetic vertical conveyor and Forming & Lining Combination Machine for 43 mm

- Forming & Lining Combination Machine x2
Pre-curling, curling, lug forming and compound inection all in 1 machine
Capacity per machine: 180 caps/min x2
Suitable Diameter: 30-110 mm dies could be installed
Power: 10,25 kW
Compressed Air: 0,5-0,6 MPa
Dimension: 1500*950*1800 mm
Weight: 2,5T

- Tunnel Oven
Heating by electricity & natural gas interchangeable
Heating Speed: Around 40.000 pcs/hour
Temperature Adjustment Rate: 160 - 220 C
Dimension: 9600*750*2000 mm
Electricity Power: 30 - 42 kW
LPG Power: 15 - 18 m3/hour

- Counting Separator
- Spare Parts
Die spares for both press and forming & lining combination machine for 43,63 and 82 mm

Not including compressor. If needed suitable compressor, 2 air tanks, air dryer and suitable generator can be added
Video available

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type User – small or medium company
Active since 2022
Offers online 1
Last activity Aug. 27, 2024

Description

High Speed Twist Off Cap Production Line

Capacity: 330 caps/min
Double dies on press and 2 Forming & Lining Combination Machines

- Automatic Feeding System
CNC feeding platform, automatic feeding device, double sheet sensor, punch press platform,
hydraulic lifting table and accessoriies, oil rolling to feeding, Panasonic control system,
10' colorful human machine interface, CNC 3-axis Panasonic servomotors system,
automatic waste collecting device
Feeding speed: 50-180 times/min (consistent with press)
Suitable sheet thickness: 0,1-0,5 mm
Allowed package of tinplate: 2,5 ton max
Detecting: Clamp, caps or can out, double sheets
Air supply: 6 bar
Power: 3 phases 4 wire, AC380, <7kW

- 65T Gantry Press (Double Die) - Yangli Brand
Nominal Force: 630 kN
Nominal Stroke: 3 mm
Slide Block Stroke: 105 mm
Max Stroke Times: 160-210 times/min x2
Max Die Set Height: 360 mm
Max Die Set Adjust Height: 20 mm
Bolster: 320*1200*100 mm
Slide Area: 350*800 mm
Main Motor Power: 11 kW
Dimension: 3500*1550*3200 mm
Weight: 11T

- Dies
Double Die in 65T Gantry Press for 82 mm
Double Die in 65T Gantry Press for 63 mm
Double Die in 65T Gantry Press for 43 mm

- Conveyor
Horizontal conveyor between press and magnetic vertical conveyor for 63 mm and 82 mm
Conveyor between magnetic vertical conveyor and Forming & Lining Combination Machine for 63 mm and 82 mm
Horizontal conveyor between press and magnetic vertical conveyor for 43 mm
Conveyor between magnetic vertical conveyor and Forming & Lining Combination Machine for 43 mm

- Forming & Lining Combination Machine x2
Pre-curling, curling, lug forming and compound inection all in 1 machine
Capacity per machine: 180 caps/min x2
Suitable Diameter: 30-110 mm dies could be installed
Power: 10,25 kW
Compressed Air: 0,5-0,6 MPa
Dimension: 1500*950*1800 mm
Weight: 2,5T

- Tunnel Oven
Heating by electricity & natural gas interchangeable
Heating Speed: Around 40.000 pcs/hour
Temperature Adjustment Rate: 160 - 220 C
Dimension: 9600*750*2000 mm
Electricity Power: 30 - 42 kW
LPG Power: 15 - 18 m3/hour

- Counting Separator
- Spare Parts
Die spares for both press and forming & lining combination machine for 43,63 and 82 mm

Not including compressor. If needed suitable compressor, 2 air tanks, air dryer and suitable generator can be added
Video available

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Capacity units/hour 330 u/h
Type of caps Twist Off
Type Automatic
-------------------
Length x width x height 18000.0 × 10000.0 × 3000.0
Worked hours 7200 hours
Hours under power 10000 hours
State like new
At local norms ---------
Status in production

About this seller

Client type User – small or medium company
Active since 2022
Offers online 1
Last activity Aug. 27, 2024

Here is a selection of similar machines

High Capacity Full Automatic Twist Off Metal Cap Production Line