Price on request
Make an offer| Power in tons | 300 T |
| Type | H-Frame |
| Table length | 1500 mm |
| Table width | 600 mm |
| Ram stroke | 96.5 mm |
| Nbr of strokes/min | 60 |
| ------------------- | |
| Length x width x height | 2200.0 × 2000.0 × 4750.0 |
| Weight | 37000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | in production |
| Last availability date | 01/04/2026 |
This listing is for a ZANI PRESSE TRG 300 mechanical press, a robust H-frame type press manufactured in 1993. It has a pressing capacity of 300 tons and features a fixed ram stroke of 96.5 mm. The press measures 2200 mm in length, 2000 mm in width, and 4750 mm in height including the motor, with a total weight of approximately 37,000 kg.
The press table dimensions are 1500 mm by 600 mm, providing a substantial working area. The ram height from the table is 600 mm, allowing for versatile pressing operations. The machine operates at a pressing speed adjustable between 20 to 60 strokes per minute in automatic mode, facilitating efficient production cycles.
Peripheral equipment includes a lower system with three adjustable hydraulic cams for workpiece ejection after embossing, and an upper system with three hydraulically adjustable cams. The press transfer system offers a bar advance stroke of 160 mm with eight-step partial bar presence detection.
Additional components include a feeder capable of handling strip widths up to 105 mm and thicknesses up to 4 mm, with an adjustment height of 150 mm. The feeder dimensions are approximately 950 mm in length, 600 mm in width, and 1500 mm in height. The winder supports maximum strip widths of 160 mm and thicknesses up to 4 mm, with dimensions of 1100 mm by 800 mm by 1500 mm.
Reel specifications include a maximum supported weight of 600 kg, maximum reel width of 500 mm, outer diameter up to 400 mm, and inner diameters ranging from 380 to 500 mm. Reel dimensions are approximately 1500 mm by 1200 mm by 1110 mm.
The mechanical press is equipped with a control panel featuring buttons, an emergency stop, and a digital display for operational control. Multiple circular adjustment knobs are positioned above the press area for fine-tuning. The press area includes metal tooling protected by an orange safety guard. A metal chute or guide is attached to the press output area to facilitate material handling.
The machine surface shows minor signs of wear and some dirt consistent with industrial use. The surrounding area appears organized and clean. A green feeder or coil straightener is positioned in front of the press, featuring a yellow safety rail for operator protection.
This ZANI TRG 300 press is suitable for heavy-duty mechanical pressing applications requiring precise control and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
ZANI 300 ton Transfer Mechanical Press with Feed Line
Year of construction: 1993
Weight: 37 tons
Press length: 2200 mm
Press width: 2000 mm
Press height + motor: 4750 mm
Fixed stroke: 96.5 mm
Height of ram from table: 600 mm
Pressing speed in automatic mode: 20 - 60 strokes/min
Table dimensions: 1500 x 600 mm
Plunger dimensions: 1500 x 600 mm
Peripheral pressing devices
Lower system with 3 adjustable hydraulic cams for workpiece ejection after embossing
Upper system with 3 hydraulically adjustable cams
Press transfer system
Bar advance stroke: 160 mm
Partial bar presence titles: 8 steps
Winder data
Maximum strip width: 160 mm
Maximum thickness: 4 mm
Winder dimensions: L=1100 , L=800 , H=1500
Feeder data:
Maximum strip width: 105 mm
Maximum thickness: 4 mm
Feeder dimensions: L=950 , W=600 , H=1500
Adjustment height: 150 mm
Reel data
maximum supported weight: 600 kg
Maximum reel width: 500 mm
Maximum outer diameter of reel: 400 mm
Reel inner diameter: min 380, max 500
Reel dimensions: L= 1500 , L= 1200 , H 1110 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What is the capacity of this ZANI TRG 300?
This ZANI TRG 300 mechanical press has a capacity of 300 tons.
What year was this equipment manufactured?
This equipment is from the year 1993.
Is this ZANI TRG 300 currently under power?
This ZANI TRG 300 mechanical press is still under power.
Does this equipment have a CE marking?
This equipment does not have a CE marking, but the feeder line does.
What safety features does this ZANI TRG 300 have?
This ZANI TRG 300 mechanical press features a pneumatic clutch with a hydraulic release in the slide in case of overload.
What is the lateral passage width of this equipment?
The lateral passage between the uprights of this equipment is 800 mm.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 27 |
| Last activity | April 18, 2026 |
ZANI 300 ton Transfer Mechanical Press with Feed Line
Year of construction: 1993
Weight: 37 tons
Press length: 2200 mm
Press width: 2000 mm
Press height + motor: 4750 mm
Fixed stroke: 96.5 mm
Height of ram from table: 600 mm
Pressing speed in automatic mode: 20 - 60 strokes/min
Table dimensions: 1500 x 600 mm
Plunger dimensions: 1500 x 600 mm
Peripheral pressing devices
Lower system with 3 adjustable hydraulic cams for workpiece ejection after embossing
Upper system with 3 hydraulically adjustable cams
Press transfer system
Bar advance stroke: 160 mm
Partial bar presence titles: 8 steps
Winder data
Maximum strip width: 160 mm
Maximum thickness: 4 mm
Winder dimensions: L=1100 , L=800 , H=1500
Feeder data:
Maximum strip width: 105 mm
Maximum thickness: 4 mm
Feeder dimensions: L=950 , W=600 , H=1500
Adjustment height: 150 mm
Reel data
maximum supported weight: 600 kg
Maximum reel width: 500 mm
Maximum outer diameter of reel: 400 mm
Reel inner diameter: min 380, max 500
Reel dimensions: L= 1500 , L= 1200 , H 1110 mm
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What is the capacity of this ZANI TRG 300?
This ZANI TRG 300 mechanical press has a capacity of 300 tons.
What year was this equipment manufactured?
This equipment is from the year 1993.
Is this ZANI TRG 300 currently under power?
This ZANI TRG 300 mechanical press is still under power.
Does this equipment have a CE marking?
This equipment does not have a CE marking, but the feeder line does.
What safety features does this ZANI TRG 300 have?
This ZANI TRG 300 mechanical press features a pneumatic clutch with a hydraulic release in the slide in case of overload.
What is the lateral passage width of this equipment?
The lateral passage between the uprights of this equipment is 800 mm.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Power in tons | 300 T |
| Type | H-Frame |
| Table length | 1500 mm |
| Table width | 600 mm |
| Ram stroke | 96.5 mm |
| Nbr of strokes/min | 60 |
| ------------------- | |
| Length x width x height | 2200.0 × 2000.0 × 4750.0 |
| Weight | 37000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | in production |
| Last availability date | 01/04/2026 |
This listing is for a ZANI PRESSE TRG 300 mechanical press, a robust H-frame type press manufactured in 1993. It has a pressing capacity of 300 tons and features a fixed ram stroke of 96.5 mm. The press measures 2200 mm in length, 2000 mm in width, and 4750 mm in height including the motor, with a total weight of approximately 37,000 kg.
The press table dimensions are 1500 mm by 600 mm, providing a substantial working area. The ram height from the table is 600 mm, allowing for versatile pressing operations. The machine operates at a pressing speed adjustable between 20 to 60 strokes per minute in automatic mode, facilitating efficient production cycles.
Peripheral equipment includes a lower system with three adjustable hydraulic cams for workpiece ejection after embossing, and an upper system with three hydraulically adjustable cams. The press transfer system offers a bar advance stroke of 160 mm with eight-step partial bar presence detection.
Additional components include a feeder capable of handling strip widths up to 105 mm and thicknesses up to 4 mm, with an adjustment height of 150 mm. The feeder dimensions are approximately 950 mm in length, 600 mm in width, and 1500 mm in height. The winder supports maximum strip widths of 160 mm and thicknesses up to 4 mm, with dimensions of 1100 mm by 800 mm by 1500 mm.
Reel specifications include a maximum supported weight of 600 kg, maximum reel width of 500 mm, outer diameter up to 400 mm, and inner diameters ranging from 380 to 500 mm. Reel dimensions are approximately 1500 mm by 1200 mm by 1110 mm.
The mechanical press is equipped with a control panel featuring buttons, an emergency stop, and a digital display for operational control. Multiple circular adjustment knobs are positioned above the press area for fine-tuning. The press area includes metal tooling protected by an orange safety guard. A metal chute or guide is attached to the press output area to facilitate material handling.
The machine surface shows minor signs of wear and some dirt consistent with industrial use. The surrounding area appears organized and clean. A green feeder or coil straightener is positioned in front of the press, featuring a yellow safety rail for operator protection.
This ZANI TRG 300 press is suitable for heavy-duty mechanical pressing applications requiring precise control and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 27 |
| Last activity | April 18, 2026 |
Механична преса ZANI PRESSE TRG 300
Mechanický lis ZANI PRESSE TRG 300
Mekanisk presse ZANI PRESSE TRG 300
Gebrauchte ZANI PRESSE TRG 300 Mechanische Presse
Μηχανική πρέσα ZANI PRESSE TRG 300
Used ZANI PRESSE TRG 300 Mechanical press
Prensa mecánica ZANI PRESSE TRG 300
Presse mécanique ZANI PRESSE TRG 300
Mehanička preša ZANI PRESSE TRG 300
ZANI PRESSE TRG 300 Mechanikus prés
Pressa Meccanica a Transfer ZANI 300 ton mod. TRG 300 completa di Linea di alimentazione
Mechaninis presas ZANI PRESSE TRG 300
ZANI PRESSE TRG 300 Mechanische pers
Prasa mechaniczna ZANI PRESSE TRG 300
Prensa mecânica ZANI PRESSE TRG 300
Presă mecanică ZANI PRESSE TRG 300
ZANI PRESSE TRG 300 Механические прессы
Mehanička presa ZANI PRESSE TRG 300
ZANI PRESSE TRG 300 Mekanisk press
Mekanik presler ZANI PRESSE TRG 300
EN
- Languages
English (GB)