Vertical cartoning machine for bag products, make Pamatech, year of construction 2008
For packaging products in cardboard boxes with a conical top
For product format: L x W x H: 186 x 160 x 30 mm
Mechanical performance of the packaging machine: approx. 55 packs/min.
Machine dimensions: L x W x H: approx. 3,000 x 1,600 x 2,210 mm

The system consists of a rotary indexing table with six stations:
1. Blank magazine with erecting station
2. Closing the bottom with hot glue, product filling
The product can be filled by hand or by means of a feed belt
3. Pre-break for conical folding boxes
4. Reserve: Optional sealing standard packaging
5. Gluing and pressing of the pointed closure using hot glue
6. Unloading station with ejector on chute

The blanks are pulled off an inclined magazine and erected in double transfer handling. The magazine has adjustable side guides and moving supports to optimize sliding behavior.

The transfer handling positions the box in a tool on the rotary indexing table, where it is clamped using retainers. The following cycle closes the lower flaps with hot glue and presses them on.

In the same station, the products are dropped into the packaging by hand or optionally by means of a conveyor belt. The third station serves to pre-break the conical folding box, the fourth station is optionally available for pre-breaking the standard folding box, in the fifth station the closing mechanism for the two box types is equipped with quick-change attachments. These stations and the upper capping guides are used for the required production. In the sixth station, the packaging is ejected onto a chute or an unloading conveyor.

The tools on the rotary indexing table are equipped with a quick-change system. To do this, the rotary table is indexed by one station at a time using the operator panel. In a defined station, the lock of the quick-change device is opened pneumatically so that the tool can be replaced.

System scope with a format:
· Round table base with stainless steel frame and cover, height-adjustable feet
· Angled magazine adjustable with movable pads
· Control cabinet above the magazine
· Robatech glue device below the magazine
· Tools and capping stations for one format
· Unloading chute
· Control Siemens s7-300 with touch screen
· Software, user guidance, plain text error messages
· Festo pneumatics
· Documentation, CE

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Output 55 /min
Bag height 186 mm
Bag width 160 mm
Max filling
-------------------
Length x width x height 3000.0 × 1600.0 × 2210.0
Worked hours
Hours under power
State good
At local norms yes
Status
Client type Reseller
Active since 2018
Offers online 90
Last activity March 28, 2024

Description

Vertical cartoning machine for bag products, make Pamatech, year of construction 2008
For packaging products in cardboard boxes with a conical top
For product format: L x W x H: 186 x 160 x 30 mm
Mechanical performance of the packaging machine: approx. 55 packs/min.
Machine dimensions: L x W x H: approx. 3,000 x 1,600 x 2,210 mm

The system consists of a rotary indexing table with six stations:
1. Blank magazine with erecting station
2. Closing the bottom with hot glue, product filling
The product can be filled by hand or by means of a feed belt
3. Pre-break for conical folding boxes
4. Reserve: Optional sealing standard packaging
5. Gluing and pressing of the pointed closure using hot glue
6. Unloading station with ejector on chute

The blanks are pulled off an inclined magazine and erected in double transfer handling. The magazine has adjustable side guides and moving supports to optimize sliding behavior.

The transfer handling positions the box in a tool on the rotary indexing table, where it is clamped using retainers. The following cycle closes the lower flaps with hot glue and presses them on.

In the same station, the products are dropped into the packaging by hand or optionally by means of a conveyor belt. The third station serves to pre-break the conical folding box, the fourth station is optionally available for pre-breaking the standard folding box, in the fifth station the closing mechanism for the two box types is equipped with quick-change attachments. These stations and the upper capping guides are used for the required production. In the sixth station, the packaging is ejected onto a chute or an unloading conveyor.

The tools on the rotary indexing table are equipped with a quick-change system. To do this, the rotary table is indexed by one station at a time using the operator panel. In a defined station, the lock of the quick-change device is opened pneumatically so that the tool can be replaced.

System scope with a format:
· Round table base with stainless steel frame and cover, height-adjustable feet
· Angled magazine adjustable with movable pads
· Control cabinet above the magazine
· Robatech glue device below the magazine
· Tools and capping stations for one format
· Unloading chute
· Control Siemens s7-300 with touch screen
· Software, user guidance, plain text error messages
· Festo pneumatics
· Documentation, CE

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Output 55 /min
Bag height 186 mm
Bag width 160 mm
Max filling
-------------------
Length x width x height 3000.0 × 1600.0 × 2210.0
Worked hours
Hours under power
State good
At local norms yes
Status

About this seller

Client type Reseller
Active since 2018
Offers online 90
Last activity March 28, 2024

Here is a selection of similar machines

Pamatech Bagging machine - Vertical - Sachet machine