Controls Siemens S5
Press Design
drive system: hydraulic
quick die change system: yes
Slide
total force (nominal): 1000 to
stroke: 300 mm
stroke rate (max.): 32 /min
slide (hydr. Press)
approximation velocity max.: 150 mm/s
working velocity min.: 10 mm/s
working velocity max.: 30 mm/s
return velocity max.: 200 mm/s
Counter Ram
nominal force: 160 to
stroke: 40 mm
V-Ring
nominal force: 400 to
stroke: 40 mm
Tool Dimensions
lower table (left-right): 900 mm
lower table (front-back): 900 mm
upper table (left-right): 900 mm
upper table (front-back): 900 mm
shut height max.: 500 mm
distance between columns (H-frame): 1250 mm
passline opening (free passage in side columns): 535 mm
range of transfer pins - in strip direction: 363 mm
Overall Specifications (coil lines)
sheet width max: 450 mm
sheet thickness max: 12 mm
max. weight of coil: 5 to
Decoiler
design: single reel
sheet width max: 450 mm
sheet width (min): 80 mm
max. weight of coil: 5 to
Leveller Unit
sheet width max: 450 mm
sheet width (min): 80 mm
sheet thickness max: 12 mm
sheet thickness (min): 1 mm
number of leveller rolls: 8
loop controls: yes
Strip-Feeder
feeder type: grip feeder
band lubrication system: yes
band support rolls: yes

+ SCHLEICHER uncoiler and straightener
coil cradle HES 12-850
straightener RMS 8-125/160-0550
+ feeder with motorized height adjustment
+ band lubrication unit (rollers)
+ backlash compensation (special equipment)
+ tool cart STÄHLER
+ hydraulic quick die change system for FEINTOOL and SCHMID tool standard
+ full enclosing of press, fencing of coil line
+ controller SIEMENS S5 with LAUER PCS 300 operator panel

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Power in tons 1000 T
Type H-Frame
Table length 900 mm
Table width 900 mm
Ram stroke 300 mm
Nbr of strokes/min 32
Distance between columns 1250 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2009
Offers online 45
Last activity March 26, 2024

Description

Controls Siemens S5
Press Design
drive system: hydraulic
quick die change system: yes
Slide
total force (nominal): 1000 to
stroke: 300 mm
stroke rate (max.): 32 /min
slide (hydr. Press)
approximation velocity max.: 150 mm/s
working velocity min.: 10 mm/s
working velocity max.: 30 mm/s
return velocity max.: 200 mm/s
Counter Ram
nominal force: 160 to
stroke: 40 mm
V-Ring
nominal force: 400 to
stroke: 40 mm
Tool Dimensions
lower table (left-right): 900 mm
lower table (front-back): 900 mm
upper table (left-right): 900 mm
upper table (front-back): 900 mm
shut height max.: 500 mm
distance between columns (H-frame): 1250 mm
passline opening (free passage in side columns): 535 mm
range of transfer pins - in strip direction: 363 mm
Overall Specifications (coil lines)
sheet width max: 450 mm
sheet thickness max: 12 mm
max. weight of coil: 5 to
Decoiler
design: single reel
sheet width max: 450 mm
sheet width (min): 80 mm
max. weight of coil: 5 to
Leveller Unit
sheet width max: 450 mm
sheet width (min): 80 mm
sheet thickness max: 12 mm
sheet thickness (min): 1 mm
number of leveller rolls: 8
loop controls: yes
Strip-Feeder
feeder type: grip feeder
band lubrication system: yes
band support rolls: yes

+ SCHLEICHER uncoiler and straightener
coil cradle HES 12-850
straightener RMS 8-125/160-0550
+ feeder with motorized height adjustment
+ band lubrication unit (rollers)
+ backlash compensation (special equipment)
+ tool cart STÄHLER
+ hydraulic quick die change system for FEINTOOL and SCHMID tool standard
+ full enclosing of press, fencing of coil line
+ controller SIEMENS S5 with LAUER PCS 300 operator panel

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Power in tons 1000 T
Type H-Frame
Table length 900 mm
Table width 900 mm
Ram stroke 300 mm
Nbr of strokes/min 32
Distance between columns 1250 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2009
Offers online 45
Last activity March 26, 2024

Here is a selection of similar machines

Schmid HSR1000 Hydraulic press