Showing 1 - 20 out of 68
Year: 2008
Planers and Planing lines Used optimization line in working order. Line equipped for full use. The equipment consists of: - Feeder for planer; - Planer (Leadermac); - Feed for "drawing" - defect marking (human work, defects are drawn with fluorescent crayons); - Feed to the measuring station (PAUL); - Measuring station (PAUL); - Elongation station (PAUL); - Cut conveyor; - …Year:
Whitney S 282 Double Spiral heads. With infeed deck and transfer to lineal feed conveyor, Outfeed with cross transfer to 75' sorting chain. POWER: 220/440Year: 1991
Working width | 2050 mm |
---|---|
Feed speed | 18 m/min |
Feeding table length | 0 mm |
---|
Year: 2022
Model: KDSP2063A 33 HP 220 V 3 Phase Mfg Date: 2022 Very low useYear: 2023
Working width | 505 mm |
---|---|
Feed speed | 12 m/min |
Feeding table length | 1200 mm |
---|---|
Shaft diameter | 120 mm |
Year: 2010
Working width | 530 mm |
---|---|
No. of knives on the shaft | 4 |
Feeding table length | 2950 mm |
---|---|
Shaft diameter | 120 mm |
Year: 2009
Working width | 430 mm |
---|---|
Feed speed | 0 m/min |
Shaft diameter | 120 mm |
Feeding table length | 2740 mm |
---|---|
No. of knives on the shaft | 4 |
Year: 2021
7.3 HP 220 V 19.9 A 3 Phase 24″ Bed Width Mfg Date: 2021Year: 2004
Three sided Timesavers lineal molding sander. Excellent condition. POWER: 220/440V with transformerYear:
12.5 HP 600 V 3 Phase 24″ Width Bed Hellical HeadYear:
Cast-iron frame Useful width : 630 mm Useful height : 450 mm 7.5 kW motor Electric lift/lower and fine adjustment Digital height display 1200 mm table length (2000 mm with extension) Backlash compensation / 4 columns Sectioned drive at infeed 2 rubber rollers at output Variable feed rate 6 to 20 m/min Voltage: 380 V Pluging: Three-phased Power: 10 Kw …Year:
1-used Oliver 24″ Planer 299-D. Motor: 5HP direct drive, Feed Motor: 1HP variable speed, 8″ thickness capacity, auto bed raise/lower, 3-knife cutter-head, knife sharpening bar/grinder attachment, sectional in-feed and chip-breaker, driven bed roll, heavy cast iron construction.Year: 2006
Dual magazine loader beginning of line Transport width 50-410mm Interface Smema manual width adjustment Transfer direction L->RYear:
SCM F410 (T) Jointer manufactured by SCM Group, is a heavy duty, long bed 16” jointer. It features cast iron tables, tilting fence and a quick change Tersa cutterhead. This machine was used in a One-Man shop. Major Features: "Tersa" 4 knife insert head with quick change knives 16" width Long Bed Magnetic starter with overload protection Heavy anodized aluminum …Year:
Table width : 550 mm Asymmetrical table length : 2700 mm 4-iron shaft Ø 120 mm Cast-iron fence, tilting from 90° to 45°, length 1200 mm 4 kW motor Ø 120 mm suction port Heavy machine Voltage: 380 V Pluging: Three-phased Power: 5 Kw Motor: 5,5 CVYear:
Spin Tissue Processor STP 120 has been developed to meet the requirements of every single laboratory. The technology and the unique processing method of the STP 120 qualifies it as the most successful Spin Tissue Processors ever. With more than 3.500 units installed around the world confirms its leading position.Year:
1-used Crescent P-24 24″ planer. 24″ capacity, Main Motor: 10 HP.