Price on request
View price| Power in tons | 40 T |
| ------------------- | |
| Length x width x height | 181.0 × 157.0 × 88.0 |
| Weight | 10889.2922 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
This Whitney 657 industrial punching machine, manufactured in 2012, offers a robust punching force of 40 tons suitable for various metal fabrication tasks. The machine features substantial dimensions of approximately 4597 mm in length, 3988 mm in width, and 2235 mm in height, with a total weight of about 10,889 kg, reflecting its solid industrial build.
The machine is equipped with a flat perforated metal worktable designed to support and position workpieces securely during operation. The punching head includes multiple control buttons and an emergency stop button for operational safety. The control panel, mounted on a stand separate from the main machine body and positioned to the right side, contains a screen, keyboard, and various controls to facilitate programming and operation.
Safety features include a yellow safety railing around part of the machine area and warning labels advising operators to keep fingers clear while in motion. A large industrial dust collection or filtration unit with multiple circular filter elements is mounted on a metal frame with ducting connected at the top, supporting clean operation by managing dust and debris.
The machine incorporates punching and forming capabilities such as electronic stroke control, positive stripping, and pressure switch for forming and marking modes. It supports a maximum punch size of 5 inches and a punch cylinder stroke length of 2 inches. The machine can handle workpieces up to 500 lbs and a maximum thickness of 1/2 inch, with a work clamp opening of 5/8 inch.
Additional features include slug and slag collection pans, the latter cooled by a recirculating water jacket, sheet repositioning cylinders, and a hydraulic heat exchanger. The hydraulic power unit is rated at 15 HP with a 50-gallon tank capacity. The system is powered electrically at 100 amps and 480 volts and requires a pneumatic supply of 90 PSI.
Equipped with a Hypertherm Hyspeed HSD 130 power supply, the machine offers rapid piercing and impressive cut speeds suitable for production on mild steel, stainless steel, and aluminum. The Beckhoff CNC control system with SigmaNest programming enhances operational efficiency and precision.
Overall, the Whitney 657 punching machine presents a clean and well-maintained appearance with minor surface wear on the punching head, indicating careful use. This machine is well-suited for industrial environments requiring reliable punching and forming capabilities with integrated dust collection and safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Punching force: 40 tons
X-axis travel: 81.77"
Y-axis travel: 50.59"
Nominal distance between punch and torch: 15"
Rapid speed: 1,000 IPM
Stroke rate: 80 SPM @ 1" centers
Punch cylinder stroke length: 2"
Maximum punch size: 5"
Tooling style: 28xx
Maximum work piece weight: 500 Lbs.
Maximum work piece thickness: 1/2"
Work clamp opening: 5/8"
Maximum work piece spread: 54"
Minimum work piece spread: 5-1/2"
Plasma capacity: 1" production on M.S. 3/4" on S.S. 1" on aluminum
Hydraulic power unit: 15 H.P.
Hydraulic tank capacity: 50 gallons
Dimensions: 181" x 157" x 88-1/2"
Weight: 24,000 Lbs.
Equipped with:
Hypertherm Hyspeed HSD 130 power supply (The HySpeed Plasma HSD130 is positioned between Powermax air plasma and HyPerformance HyDefinition plasma systems. It features impressive cut speeds, rapid piercing and minimal secondary operations for maximum productivity. A cost-effective alternative to other metal cutting solutions such as oxyfuel or air plasma, the system incorporates Hypertherm’s patented LongLife technology to significantly improve consumable life for both oxygen and air processes.)
Donaldson Torit DFT2-8 8 cratridge system with integrated blower
Beckhoff CNC control with SigmaNest programming system
Punching and forming capabilities include electronic stroke control, positive stripping, pressure switch for forming and marking modes.
Slug collection pan
Slag collection pan (chamber is cooled by a recirculating water jacket)
Sheet repositioning cylinders
Hydraulic heat exchanger
Foundation requirement" 6" steel reinforced concrete
Electrical requirement: 100 amps @ 480 volt
Pneumatic requirement: 90 PSI
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 25 |
| Last activity | May 19, 2026 |
Punching force: 40 tons
X-axis travel: 81.77"
Y-axis travel: 50.59"
Nominal distance between punch and torch: 15"
Rapid speed: 1,000 IPM
Stroke rate: 80 SPM @ 1" centers
Punch cylinder stroke length: 2"
Maximum punch size: 5"
Tooling style: 28xx
Maximum work piece weight: 500 Lbs.
Maximum work piece thickness: 1/2"
Work clamp opening: 5/8"
Maximum work piece spread: 54"
Minimum work piece spread: 5-1/2"
Plasma capacity: 1" production on M.S. 3/4" on S.S. 1" on aluminum
Hydraulic power unit: 15 H.P.
Hydraulic tank capacity: 50 gallons
Dimensions: 181" x 157" x 88-1/2"
Weight: 24,000 Lbs.
Equipped with:
Hypertherm Hyspeed HSD 130 power supply (The HySpeed Plasma HSD130 is positioned between Powermax air plasma and HyPerformance HyDefinition plasma systems. It features impressive cut speeds, rapid piercing and minimal secondary operations for maximum productivity. A cost-effective alternative to other metal cutting solutions such as oxyfuel or air plasma, the system incorporates Hypertherm’s patented LongLife technology to significantly improve consumable life for both oxygen and air processes.)
Donaldson Torit DFT2-8 8 cratridge system with integrated blower
Beckhoff CNC control with SigmaNest programming system
Punching and forming capabilities include electronic stroke control, positive stripping, pressure switch for forming and marking modes.
Slug collection pan
Slag collection pan (chamber is cooled by a recirculating water jacket)
Sheet repositioning cylinders
Hydraulic heat exchanger
Foundation requirement" 6" steel reinforced concrete
Electrical requirement: 100 amps @ 480 volt
Pneumatic requirement: 90 PSI
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 40 T |
| ------------------- | |
| Length x width x height | 181.0 × 157.0 × 88.0 |
| Weight | 10889.2922 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
This Whitney 657 industrial punching machine, manufactured in 2012, offers a robust punching force of 40 tons suitable for various metal fabrication tasks. The machine features substantial dimensions of approximately 4597 mm in length, 3988 mm in width, and 2235 mm in height, with a total weight of about 10,889 kg, reflecting its solid industrial build.
The machine is equipped with a flat perforated metal worktable designed to support and position workpieces securely during operation. The punching head includes multiple control buttons and an emergency stop button for operational safety. The control panel, mounted on a stand separate from the main machine body and positioned to the right side, contains a screen, keyboard, and various controls to facilitate programming and operation.
Safety features include a yellow safety railing around part of the machine area and warning labels advising operators to keep fingers clear while in motion. A large industrial dust collection or filtration unit with multiple circular filter elements is mounted on a metal frame with ducting connected at the top, supporting clean operation by managing dust and debris.
The machine incorporates punching and forming capabilities such as electronic stroke control, positive stripping, and pressure switch for forming and marking modes. It supports a maximum punch size of 5 inches and a punch cylinder stroke length of 2 inches. The machine can handle workpieces up to 500 lbs and a maximum thickness of 1/2 inch, with a work clamp opening of 5/8 inch.
Additional features include slug and slag collection pans, the latter cooled by a recirculating water jacket, sheet repositioning cylinders, and a hydraulic heat exchanger. The hydraulic power unit is rated at 15 HP with a 50-gallon tank capacity. The system is powered electrically at 100 amps and 480 volts and requires a pneumatic supply of 90 PSI.
Equipped with a Hypertherm Hyspeed HSD 130 power supply, the machine offers rapid piercing and impressive cut speeds suitable for production on mild steel, stainless steel, and aluminum. The Beckhoff CNC control system with SigmaNest programming enhances operational efficiency and precision.
Overall, the Whitney 657 punching machine presents a clean and well-maintained appearance with minor surface wear on the punching head, indicating careful use. This machine is well-suited for industrial environments requiring reliable punching and forming capabilities with integrated dust collection and safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 25 |
| Last activity | May 19, 2026 |
Машина за щанцоване Whitney 657
Děrovací stroj Whitney 657
Whitney 657 Stansemaskine
Whitney 657 Stanzmaschine
Μηχανή διάτρησης Whitney 657
Whitney 657 Punching machine
Punzonadora Whitney 657
Poinçonneuse Whitney 657
Stroj za bušenje Whitney 657
Whitney 657 Lyukasztógép
Punzonatrice Whitney 657
Perforavimo mašina Whitney 657
Whitney 657 Ponsmachine
Wykrawarka Whitney 657
Máquina de perfuração Whitney 657
Mașină de perforat Whitney 657
Whitney 657 Перфоратор
Mašina za udaranje Whitney 657
Whitney 657 Stansmaskin
Punch makinesi Whitney 657
EN
- Languages
English (GB)