Total installed power: 250 kW for heating 12 steel wires to 700° С. Material to be heated: steel wire with 0.1 - 0.8% C. Diameter: 1 mm - 2 mm. Number of wire strands: 12 (minimum 10). Wire spacing: 18 mm. Input temperature: 20°. Output temperature in operation: 700°C regulated. Output temperature - maximum: Curie point. Heating efficiency: 2 mm diameter: 5.5 kg/kWhr, 1 mm diameter 4.4 kg/kWhr. Year of manufacture: 2012
Consisting of the following units: 1 mains transformer 350 kVA; 1 high frequency modular static inverter, output power 250 kW; 1 inductor support with adjustment system to centre the inductor on the wire centre with compensation unit; inductor water cooled, for twelve wires with diameter 1.0-2.0 mm; control panel; closed cooling circuit system for all components (induction included) with stainless steel plates, stainless steel pumps and stainless steel water tank; temperature control system; connection chamber at the end of the induction coil with removable cover, the connection chamber has a connection for the introduction of inert gas; pyrometer for 12 wires.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status under power
Client type User – small or medium company
Active since 2023
Offers online 3
Last activity Jan. 18, 2024

Description

Total installed power: 250 kW for heating 12 steel wires to 700° С. Material to be heated: steel wire with 0.1 - 0.8% C. Diameter: 1 mm - 2 mm. Number of wire strands: 12 (minimum 10). Wire spacing: 18 mm. Input temperature: 20°. Output temperature in operation: 700°C regulated. Output temperature - maximum: Curie point. Heating efficiency: 2 mm diameter: 5.5 kg/kWhr, 1 mm diameter 4.4 kg/kWhr. Year of manufacture: 2012
Consisting of the following units: 1 mains transformer 350 kVA; 1 high frequency modular static inverter, output power 250 kW; 1 inductor support with adjustment system to centre the inductor on the wire centre with compensation unit; inductor water cooled, for twelve wires with diameter 1.0-2.0 mm; control panel; closed cooling circuit system for all components (induction included) with stainless steel plates, stainless steel pumps and stainless steel water tank; temperature control system; connection chamber at the end of the induction coil with removable cover, the connection chamber has a connection for the introduction of inert gas; pyrometer for 12 wires.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status under power

About this seller

Client type User – small or medium company
Active since 2023
Offers online 3
Last activity Jan. 18, 2024

Here is a selection of similar machines

Used Radyne, Inductotherm Group Induktion Industrial oven