Sorry, this offer is no longer available on Exapro

WEINIG PROFIMAT 23 FORTEC 260x180mm Used multihead moulder

Here is a selection of similar machines

WEINIG moulder model PROFIMAT 23 (260×180) FORTEC,
in configuration for carpentry / lamellar works:
– useful working measures 260x180mm
– cardan drive and differentiated pneumatic pressure
– feed speed variable from 5 to 24 m/min
– feed motor KW 4 - HP 5.5
– upper feed group before the 1st shaft
– lower feed group after the 5th shaft
– machine floor with air curtain
– 1050mm short entrance surface
– foot operated lubrication pump
– protective cabin
– shafts D=40mm at 6000rpm
– complete with original Z=2 cutter heads on the 4 shafts,
and brush on the 5th lower shaft
Trees:
1- under 11 kw – 15 hp
2- right
3- left (right and left with single motor kw 11 – hp 15), with application
of inverters for processing also in brushing/rusticing
4- above kw 11 – hp 15
5- below kw11 – hp 15, with pulleys modified for shaft revolutions 1800rpm
for brushing/rustic finishing
Total installed power 50 kW, 380 volts
Year 2001, machine according to CE standards

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Working width 260 mm
Working height 180 mm
Nbr of shafts 5
Shafts diameter 40 mm
Sound proof cabin Yes
Feeding table length 1050 mm
Feed speed 24 m/min
Engine power 50 kW
-------------------
Worked hours
Hours under power
State in working conditions
At local norms yes
Status visible
Client type Reseller
Active since 2008
Offers online 33
Last activity March 28, 2024

Description

WEINIG moulder model PROFIMAT 23 (260×180) FORTEC,
in configuration for carpentry / lamellar works:
– useful working measures 260x180mm
– cardan drive and differentiated pneumatic pressure
– feed speed variable from 5 to 24 m/min
– feed motor KW 4 - HP 5.5
– upper feed group before the 1st shaft
– lower feed group after the 5th shaft
– machine floor with air curtain
– 1050mm short entrance surface
– foot operated lubrication pump
– protective cabin
– shafts D=40mm at 6000rpm
– complete with original Z=2 cutter heads on the 4 shafts,
and brush on the 5th lower shaft
Trees:
1- under 11 kw – 15 hp
2- right
3- left (right and left with single motor kw 11 – hp 15), with application
of inverters for processing also in brushing/rusticing
4- above kw 11 – hp 15
5- below kw11 – hp 15, with pulleys modified for shaft revolutions 1800rpm
for brushing/rustic finishing
Total installed power 50 kW, 380 volts
Year 2001, machine according to CE standards

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Working width 260 mm
Working height 180 mm
Nbr of shafts 5
Shafts diameter 40 mm
Sound proof cabin Yes
Feeding table length 1050 mm
Feed speed 24 m/min
Engine power 50 kW
-------------------
Worked hours
Hours under power
State in working conditions
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2008
Offers online 33
Last activity March 28, 2024