Sorry, this offer is no longer available on Exapro

Weinig Profimat 23 E Used multihead moulder

Here is a selection of similar machines

Grooves bed:Yes
Shaft speed:6000
Feeding - kw:2
Table length:2000
Noise enclosure:Yes
4.top spindle kw:4
Planing hight mm:125
Planing widht mm:230
3.left spindle kw:4
Compressed air bar:6
1.bottom spindle kw:4
Fast exchange device:No
Tool exchange places:No
2nd spindle on right kw:4
5th spindle at bottom kw:4
Pneumatical top pressure:Yes
Adjustment electonic ally:Yes
Diameter of the spindle mm:40
Feeding speed min-max m/min:10-36
Fully suspended drive feeding:Yes
Electrical adjustment spindles:2 spindle
Machine ready for demonstration:Yes
Min.max. workpiece length in mm:350

WEINIG PROFIMAT 23E "Select" Moulder Feed Through--- 5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".
-- Head sequence: Bottom 10 HP, right & left by 15 HP, top 15 HP and bottom 10 HP motor.
-- Spindles; Dia.1-1/2"with cutterhead speed of 6,000 RPM; Digiset readouts for left and top spindles, mechanical readouts all other spindles including chipbreaker and pressure element.
-- Feed System: Feed motor 5 HP, variable speed of 20 - 78 FPM. One(1) powered feed roller at outfeed end on the machine. Infeed: Straightening 2 M (6'6") table, side pressure roller mounted to infeed table.
-- Features: Central lubrication system, table inserts for right/left vertical spindles and manual Waxilit pump.
-- Full sound and safety enclosure, operator/spare parts manuals.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Working width 230 mm
Working height 125 mm
Nbr of shafts 5
Shafts diameter 40 mm
Sound proof cabin Yes
Feeding table length 2000 mm
Feed speed 24 m/min
Engine power 5.5 kW
-------------------
Worked hours
Hours under power
State excellent
At local norms ---------
Status
Datasheet Weinig Profimat 23
Client type User – large company
Active since 2016
Offers online 2
Last activity March 21, 2024

Description

Grooves bed:Yes
Shaft speed:6000
Feeding - kw:2
Table length:2000
Noise enclosure:Yes
4.top spindle kw:4
Planing hight mm:125
Planing widht mm:230
3.left spindle kw:4
Compressed air bar:6
1.bottom spindle kw:4
Fast exchange device:No
Tool exchange places:No
2nd spindle on right kw:4
5th spindle at bottom kw:4
Pneumatical top pressure:Yes
Adjustment electonic ally:Yes
Diameter of the spindle mm:40
Feeding speed min-max m/min:10-36
Fully suspended drive feeding:Yes
Electrical adjustment spindles:2 spindle
Machine ready for demonstration:Yes
Min.max. workpiece length in mm:350

WEINIG PROFIMAT 23E "Select" Moulder Feed Through--- 5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".
-- Head sequence: Bottom 10 HP, right & left by 15 HP, top 15 HP and bottom 10 HP motor.
-- Spindles; Dia.1-1/2"with cutterhead speed of 6,000 RPM; Digiset readouts for left and top spindles, mechanical readouts all other spindles including chipbreaker and pressure element.
-- Feed System: Feed motor 5 HP, variable speed of 20 - 78 FPM. One(1) powered feed roller at outfeed end on the machine. Infeed: Straightening 2 M (6'6") table, side pressure roller mounted to infeed table.
-- Features: Central lubrication system, table inserts for right/left vertical spindles and manual Waxilit pump.
-- Full sound and safety enclosure, operator/spare parts manuals.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Working width 230 mm
Working height 125 mm
Nbr of shafts 5
Shafts diameter 40 mm
Sound proof cabin Yes
Feeding table length 2000 mm
Feed speed 24 m/min
Engine power 5.5 kW
-------------------
Worked hours
Hours under power
State excellent
At local norms ---------
Status

About this seller

Client type User – large company
Active since 2016
Offers online 2
Last activity March 21, 2024