Price on request
Make an offer| Table length | 1050 mm |
| Table width | 1000 mm |
| Ram stroke | 600 mm |
| Nbr of strokes/min | 12 |
| Screw diameter | 400 mm |
| Engine Power | 140 kW |
| ------------------- | |
| Length x width x height | 8000.0 × 3140.0 × 6900.0 |
| Weight | 96900 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Weingarten PSR400 |
| Last availability date | 02/04/2026 |
The Weingarten PSR400 is a robust industrial screw press designed for forging applications, manufactured in 1979. This machine features a substantial forging capacity of 1600 tons, supported by a screw diameter of 400 mm and a ram stroke reaching up to 600 mm. It operates at a rate of 12 strokes per minute, delivering continuous force up to 26,000 kN and a calibration force of 32,000 kN. The gross energy capacity ranges between 180 and 250 (units not specified), with a maximum of 3 blows per sequence at full energy.
The press table measures 1050 mm in length and 1000 mm in width, while the ram sole size is 1000 x 950 mm. The machine's overall dimensions are considerable, with a length of 8000 mm, width of 3140 mm, and a height of 6900 mm, weighing approximately 96.9 tons. The press requires a main power input of 140 kW to operate.
Additional structural details include a distance between guides of 1030 mm and a distance between upright under slides of 1200 mm. The table level stands 320 mm above the ground, and the total height of the machine above the floor is 6.9 meters, with a minimum crane height of 9 meters needed for dismantling.
This machine is equipped with all electrical cabinets and an automation drive system built by Lasco in 2002. It comes with a set of spare parts, both used and new. Notably, the upper parts of the press were retrofitted approximately five years ago, including a new main motor, screw, and nuts. The ram has been inspected for condition.
The Weingarten PSR400 is housed within a spacious industrial environment and features protective yellow and black fencing around the control panel area for safety. The control panel includes a screen and multiple cables. The machine shows signs of heavy use, with visible dirt and wear consistent with an industrial setting. It is sold as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine Title: Weingarten PSR400 Screw Press
Manufacturer: Weingarten
Model: PSR400
Year of Manufacture: 1979
Condition: Good working condition
Forging Equipment Capacity: 1600 tons
Screw Diameter: 400 mm
Stroke Minimum/Maximum: 230/600 mm
Number of Strokes: 12/min
Continuous Force Admitted: 26000 kN
Calibration Force: 32000 kN
Gross Energy Capacity: 180/250
Blow Sequence at Energy: Max 3.0
Main Power Required: 140 kW
Distance Table/Ram Maximum/Minimum: 1520/920 mm
Distance Between Guides: 1030 mm
Distance Between Upright Under Slides: 1200 mm
Table Size (Width/Depth): 1000 x 1050 mm
Ram Sole Size: 1000 x 950 mm
Maximum Width of Machine: 3140 mm
Maximum Depth of Machine: 1030/1550 mm
Press Base: 3100 x 2000 mm
Table Level Above Ground: 320 mm
Total Height of Machine Above Floor: 6.9 m
Total Height of Machine: 8 m
Minimum Height of Crane for Dismantling: 9 m
Minimum Force of Crane for Light Parts: 5 tons
Maximum Width of Maintenance Platform: 5400 mm
Maximum Depth of Platform: 1700/2700 mm
Vertical Force Applied on the Foundation: 3500 kN
Tangential Force on the Foundation: 3000 kN
Press Weight: 96.9 tons
Additional Information:
The machine will be sold with all electrical cabinets and automation drive built by Lasco in 2002. It includes one set of spare parts (both used and new). The upper parts of the press have been retrofitted 5 years ago, including a new main motor, screw, and nuts. The ram has been checked.
Item Condition: As-is, where-is.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Machine Title: Weingarten PSR400 Screw Press
Manufacturer: Weingarten
Model: PSR400
Year of Manufacture: 1979
Condition: Good working condition
Forging Equipment Capacity: 1600 tons
Screw Diameter: 400 mm
Stroke Minimum/Maximum: 230/600 mm
Number of Strokes: 12/min
Continuous Force Admitted: 26000 kN
Calibration Force: 32000 kN
Gross Energy Capacity: 180/250
Blow Sequence at Energy: Max 3.0
Main Power Required: 140 kW
Distance Table/Ram Maximum/Minimum: 1520/920 mm
Distance Between Guides: 1030 mm
Distance Between Upright Under Slides: 1200 mm
Table Size (Width/Depth): 1000 x 1050 mm
Ram Sole Size: 1000 x 950 mm
Maximum Width of Machine: 3140 mm
Maximum Depth of Machine: 1030/1550 mm
Press Base: 3100 x 2000 mm
Table Level Above Ground: 320 mm
Total Height of Machine Above Floor: 6.9 m
Total Height of Machine: 8 m
Minimum Height of Crane for Dismantling: 9 m
Minimum Force of Crane for Light Parts: 5 tons
Maximum Width of Maintenance Platform: 5400 mm
Maximum Depth of Platform: 1700/2700 mm
Vertical Force Applied on the Foundation: 3500 kN
Tangential Force on the Foundation: 3000 kN
Press Weight: 96.9 tons
Additional Information:
The machine will be sold with all electrical cabinets and automation drive built by Lasco in 2002. It includes one set of spare parts (both used and new). The upper parts of the press have been retrofitted 5 years ago, including a new main motor, screw, and nuts. The ram has been checked.
Item Condition: As-is, where-is.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Table length | 1050 mm |
| Table width | 1000 mm |
| Ram stroke | 600 mm |
| Nbr of strokes/min | 12 |
| Screw diameter | 400 mm |
| Engine Power | 140 kW |
| ------------------- | |
| Length x width x height | 8000.0 × 3140.0 × 6900.0 |
| Weight | 96900 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Weingarten PSR400 |
| Last availability date | 02/04/2026 |
The Weingarten PSR400 is a robust industrial screw press designed for forging applications, manufactured in 1979. This machine features a substantial forging capacity of 1600 tons, supported by a screw diameter of 400 mm and a ram stroke reaching up to 600 mm. It operates at a rate of 12 strokes per minute, delivering continuous force up to 26,000 kN and a calibration force of 32,000 kN. The gross energy capacity ranges between 180 and 250 (units not specified), with a maximum of 3 blows per sequence at full energy.
The press table measures 1050 mm in length and 1000 mm in width, while the ram sole size is 1000 x 950 mm. The machine's overall dimensions are considerable, with a length of 8000 mm, width of 3140 mm, and a height of 6900 mm, weighing approximately 96.9 tons. The press requires a main power input of 140 kW to operate.
Additional structural details include a distance between guides of 1030 mm and a distance between upright under slides of 1200 mm. The table level stands 320 mm above the ground, and the total height of the machine above the floor is 6.9 meters, with a minimum crane height of 9 meters needed for dismantling.
This machine is equipped with all electrical cabinets and an automation drive system built by Lasco in 2002. It comes with a set of spare parts, both used and new. Notably, the upper parts of the press were retrofitted approximately five years ago, including a new main motor, screw, and nuts. The ram has been inspected for condition.
The Weingarten PSR400 is housed within a spacious industrial environment and features protective yellow and black fencing around the control panel area for safety. The control panel includes a screen and multiple cables. The machine shows signs of heavy use, with visible dirt and wear consistent with an industrial setting. It is sold as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Винтова преса Weingarten PSR400
Šroubový lis Weingarten PSR400
Weingarten PSR400 Skruepresse
Weingarten PSR400 Spindelpresse
Κοχλιοφόρα πρέσα Weingarten PSR400
Weingarten PSR400 Screw press
Prensa de tornillo Weingarten PSR400
Presse à vis Weingarten PSR400
Vijčana preša Weingarten PSR400
Weingarten PSR400 Csavarorsós prés
Pressa a vite Weingarten PSR400
Weingarten PSR400 Sraigtinis presas
Weingarten PSR400 Schroefpers
Prasa śrubowa Weingarten PSR400
Prensa de parafuso Weingarten PSR400
Presă cu șurub Weingarten PSR400
Weingarten PSR400 Винтовой пресс
Vijčana presa Weingarten PSR400
Weingarten PSR400 Skruvpress
Vidalı pres Weingarten PSR400
EN
- Languages
English (GB)