Price on request
Make an offer| Power in tons | 160 T |
| Type | H-Frame |
| Table length | 1100 mm |
| Table width | 1280 mm |
| Ram stroke | 160 mm |
| Nbr of strokes/min | 120 |
| Distance between columns | 1120 mm |
| Engine Power | 40 kW |
| ------------------- | |
| Weight | 24000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 11/02/2026 |
This Weingarten HD 160 hydraulic press, manufactured in 1978 in Germany, is a robust H-frame double column automatic stamping press designed for high-capacity industrial applications. It offers a pressing capacity of 160 tons (1,600 kN) and features a table clamping area measuring 1100 x 1280 mm, providing ample workspace for various metal forming tasks. The ram clamping area is 850 x 890 mm, with a ram stroke of 160 mm and motor-driven ram adjustment of 125 mm, allowing precise control over pressing depth.
The machine operates at an adjustable stroke rate of 40 to 120 strokes per minute, with stroke adjustments available at 30, 68, 114, and 160 mm. The distance between ram guides is 1120 mm, and the distance between columns below the guides is 1350 mm, ensuring stability during operation. The mounting height varies between 340 and 650 mm depending on the stroke and whether a clamping plate is used.
Equipped with a 40 kW engine, this press includes several advanced features such as automatic oil circulation lubrication with supervision and hydraulic overload protection to enhance reliability and safety. It also comes with a built-on straightening device for metal widths up to 400 mm and adjustable metal thickness from 1 to 3 mm.
Additional accessories include a FREI/Weingarten straightening device Model AMR 04 So with overhead loop control that streamlines strip material feeding without requiring a pit, and a HEILBRONN coil unwinding device Model HAEMH 4000/500 S with coil storage capable of handling coils up to 4000 kg and 1500 mm diameter.
The machine is fitted with a conveyor belt for finished parts and features a separate switch cabinet modernized in 1990. The press weighs approximately 24,000 kg.
Visually, the press displays the WEINGARTEN brand prominently on its front. The control panel is located on the left side and includes multiple buttons, switches, and a gauge for operation management. Protective metal rods and a safety chain are installed in the press opening to enhance operator safety. Some paint wear and chipping are visible on the lower front of the machine, which is typical for equipment of this age and usage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Weingarten (Germany)
Double Column Automatic sianking press with automatic feed of strip material
Model HD 160 Year 1978
Pressing capacity 160 ton (1,600 kN)
Table clamping area 1,100x 1,280 mm
Ram clamping area 850x890 mm
Distance between ram guides 1,120 mm
Distance between columns (below guides) 1,350 mm
No. of strokes, infinitely variable 40-120 /min
Adjustment of stoke 30, 68,114 and 160 mm
Ram adjustment, motor driven 125 mm
Mounting height, depending on stroke, without clamping plate 460 650 mm, with clamping plate 340 530 mm
Admissible number of strokes in relation to material feed, 300mm = 40 60 strokes 150mm = 120 strokes
Total electrical load, approx. 40 kW-500V - 50 Hz
Weight, approx. 24,000 kg
Accessories / Special Features:
FREI / WEINGARTEN Straightening Device, Model AMR 04 So, with overhead loop control (space saving because it does not need a pit). The loop control guides the strip material over the uncoiler to a single-sided gripper feeder and then into the machine.
HEILBRONN Coil Unwinding Device, Model HAEMH 4000/500 S #204753, with coil storage place, from which the coil is picked up and clamped and then transported back to the starting position. Max. weight of coil 4000 kg. Max. @ of coil 1500 mm. Max. width of metal band 500 mm.
Built-on straightening device for max. metal width of 400 mm. The width of metal feed can be adjusted. Metal thickness adjustable 1 3 mm.
Automatic oil circulation lubrication with supervision.
Hydraulic overload protection.
Motor-driven ram adjustment 125 mm.
Conveyor belt for the finished parts.
Separate switch cabinet, modernized in 1990.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 172 |
| Last activity | April 17, 2026 |
Weingarten (Germany)
Double Column Automatic sianking press with automatic feed of strip material
Model HD 160 Year 1978
Pressing capacity 160 ton (1,600 kN)
Table clamping area 1,100x 1,280 mm
Ram clamping area 850x890 mm
Distance between ram guides 1,120 mm
Distance between columns (below guides) 1,350 mm
No. of strokes, infinitely variable 40-120 /min
Adjustment of stoke 30, 68,114 and 160 mm
Ram adjustment, motor driven 125 mm
Mounting height, depending on stroke, without clamping plate 460 650 mm, with clamping plate 340 530 mm
Admissible number of strokes in relation to material feed, 300mm = 40 60 strokes 150mm = 120 strokes
Total electrical load, approx. 40 kW-500V - 50 Hz
Weight, approx. 24,000 kg
Accessories / Special Features:
FREI / WEINGARTEN Straightening Device, Model AMR 04 So, with overhead loop control (space saving because it does not need a pit). The loop control guides the strip material over the uncoiler to a single-sided gripper feeder and then into the machine.
HEILBRONN Coil Unwinding Device, Model HAEMH 4000/500 S #204753, with coil storage place, from which the coil is picked up and clamped and then transported back to the starting position. Max. weight of coil 4000 kg. Max. @ of coil 1500 mm. Max. width of metal band 500 mm.
Built-on straightening device for max. metal width of 400 mm. The width of metal feed can be adjusted. Metal thickness adjustable 1 3 mm.
Automatic oil circulation lubrication with supervision.
Hydraulic overload protection.
Motor-driven ram adjustment 125 mm.
Conveyor belt for the finished parts.
Separate switch cabinet, modernized in 1990.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 160 T |
| Type | H-Frame |
| Table length | 1100 mm |
| Table width | 1280 mm |
| Ram stroke | 160 mm |
| Nbr of strokes/min | 120 |
| Distance between columns | 1120 mm |
| Engine Power | 40 kW |
| ------------------- | |
| Weight | 24000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 11/02/2026 |
This Weingarten HD 160 hydraulic press, manufactured in 1978 in Germany, is a robust H-frame double column automatic stamping press designed for high-capacity industrial applications. It offers a pressing capacity of 160 tons (1,600 kN) and features a table clamping area measuring 1100 x 1280 mm, providing ample workspace for various metal forming tasks. The ram clamping area is 850 x 890 mm, with a ram stroke of 160 mm and motor-driven ram adjustment of 125 mm, allowing precise control over pressing depth.
The machine operates at an adjustable stroke rate of 40 to 120 strokes per minute, with stroke adjustments available at 30, 68, 114, and 160 mm. The distance between ram guides is 1120 mm, and the distance between columns below the guides is 1350 mm, ensuring stability during operation. The mounting height varies between 340 and 650 mm depending on the stroke and whether a clamping plate is used.
Equipped with a 40 kW engine, this press includes several advanced features such as automatic oil circulation lubrication with supervision and hydraulic overload protection to enhance reliability and safety. It also comes with a built-on straightening device for metal widths up to 400 mm and adjustable metal thickness from 1 to 3 mm.
Additional accessories include a FREI/Weingarten straightening device Model AMR 04 So with overhead loop control that streamlines strip material feeding without requiring a pit, and a HEILBRONN coil unwinding device Model HAEMH 4000/500 S with coil storage capable of handling coils up to 4000 kg and 1500 mm diameter.
The machine is fitted with a conveyor belt for finished parts and features a separate switch cabinet modernized in 1990. The press weighs approximately 24,000 kg.
Visually, the press displays the WEINGARTEN brand prominently on its front. The control panel is located on the left side and includes multiple buttons, switches, and a gauge for operation management. Protective metal rods and a safety chain are installed in the press opening to enhance operator safety. Some paint wear and chipping are visible on the lower front of the machine, which is typical for equipment of this age and usage.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 172 |
| Last activity | April 17, 2026 |
Weingarten HD 160
Hydraulický lis Weingarten HD 160
Weingarten HD 160
Weingarten HD 160 Hydraulikpresse
Weingarten HD 160
Weingarten HD 160 Hydraulic press
Prensa hidráulica Weingarten HD 160
Presse hydraulique Weingarten HD 160
Weingarten HD 160
Weingarten HD 160
Pressa idraulica Weingarten HD 160
Weingarten HD 160
Weingarten HD 160
Prasa hydrauliczna Weingarten HD 160
Weingarten HD 160
Weingarten HD 160
Weingarten HD 160 Гидравлический пресс
Weingarten HD 160
Weingarten HD 160
Hidrolik Pres Weingarten HD 160
EN
- Languages
English (GB)