Price on request
View price| Center height | 280 mm |
| Ø above the bed | 570 mm |
| Spindle nose | |
| Spindle bore | 83 mm |
| Turning speed | 2500 rpm |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| ------------------- | |
| Length x width x height | 2000.0 × 570.0 × 280.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 18/05/2026 |
Offer Title: Weiler E50x2000 Parallel Lathe
Manufacturer: Weiler
Model: E50x2000
Year of Manufacture: 2008
Technical Condition: Fully overhauled in 2026
Control System: Weiler D3 with Siemens Sinumerik 810D
Number of Axes: 2
Center Distance: 2000 mm
Center Height: 280 mm
Swing Over Bed: 570 mm
Swing Over Cross Slide: 340 mm
Cross Slide Travel: 340 mm
Bed Slide Guide Length: 560 mm
Spindle Head: DIN 55025, size 8
Spindle Bore: 83 mm
Main Spindle Internal Taper: Metric 90
Main Drive Power: 20 kW (60% duty cycle); 17 kW (100% duty cycle)
Maximum Spindle Torque: 1600 Nm
Spindle Speed Range: Gear Stage 1: 1–625 rpm; Gear Stage 2: 4–2500 rpm
Tailstock Quill Diameter: 80 mm
Tailstock Quill Stroke: 200 mm
Tailstock Quill Taper: Morse Taper 5
Tool Holder System: Multifix size C or Parat size 3
Chip Conveyor: Used unit included
Optional Accessory: Additional chip conveyor available
Overhaul Details:
- Hardening and grinding of all bed guides
- Grinding of tailstock guides
- Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways)
- Renewal of bed slide sliding lining
- Renewal or relining of keyways and lower guides
- Installation of a tool system on a console (Multifix C or Parat Gr.3)
- Overhaul of complete spindle housing assembly
- Regrind main spindle (internal/external taper and face)
- Renewal of main spindle bearings
- Renewal of X-axis ball screw drive incl. bearings
- Renewal of Z-axis ball screw drive incl. bearings
- Overhaul of tailstock quill and bore; replacement of spindle and nut
- Renewal of all guideway wipers
- Replacement of all drive belts
- Cleaning and testing of main spindle motor
- Overhaul of existing safety devices
- Replacement of defective rotary, rocker, and limit switches
- Replacement of spindle and handwheel encoders
- Cleaning and testing of the central lubrication unit
- Replacement of movable cables and coolant hoses in the work area/to the monitor
- Replacement of the membrane keypad (monitor)
- Renewal of the energy chains
- Painting in standard colors (standard texture)
- DGUV and high-voltage testing with test report
- Data backup of machine parameters/software
- Geometric acceptance testing according to DIN 8605
Availability: Machine available soon
Note: The pictures are only references of how it would look like.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1991 |
| Last activity | May 19, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Offer Title: Weiler E50x2000 Parallel Lathe
Manufacturer: Weiler
Model: E50x2000
Year of Manufacture: 2008
Technical Condition: Fully overhauled in 2026
Control System: Weiler D3 with Siemens Sinumerik 810D
Number of Axes: 2
Center Distance: 2000 mm
Center Height: 280 mm
Swing Over Bed: 570 mm
Swing Over Cross Slide: 340 mm
Cross Slide Travel: 340 mm
Bed Slide Guide Length: 560 mm
Spindle Head: DIN 55025, size 8
Spindle Bore: 83 mm
Main Spindle Internal Taper: Metric 90
Main Drive Power: 20 kW (60% duty cycle); 17 kW (100% duty cycle)
Maximum Spindle Torque: 1600 Nm
Spindle Speed Range: Gear Stage 1: 1–625 rpm; Gear Stage 2: 4–2500 rpm
Tailstock Quill Diameter: 80 mm
Tailstock Quill Stroke: 200 mm
Tailstock Quill Taper: Morse Taper 5
Tool Holder System: Multifix size C or Parat size 3
Chip Conveyor: Used unit included
Optional Accessory: Additional chip conveyor available
Overhaul Details:
- Hardening and grinding of all bed guides
- Grinding of tailstock guides
- Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways)
- Renewal of bed slide sliding lining
- Renewal or relining of keyways and lower guides
- Installation of a tool system on a console (Multifix C or Parat Gr.3)
- Overhaul of complete spindle housing assembly
- Regrind main spindle (internal/external taper and face)
- Renewal of main spindle bearings
- Renewal of X-axis ball screw drive incl. bearings
- Renewal of Z-axis ball screw drive incl. bearings
- Overhaul of tailstock quill and bore; replacement of spindle and nut
- Renewal of all guideway wipers
- Replacement of all drive belts
- Cleaning and testing of main spindle motor
- Overhaul of existing safety devices
- Replacement of defective rotary, rocker, and limit switches
- Replacement of spindle and handwheel encoders
- Cleaning and testing of the central lubrication unit
- Replacement of movable cables and coolant hoses in the work area/to the monitor
- Replacement of the membrane keypad (monitor)
- Renewal of the energy chains
- Painting in standard colors (standard texture)
- DGUV and high-voltage testing with test report
- Data backup of machine parameters/software
- Geometric acceptance testing according to DIN 8605
Availability: Machine available soon
Note: The pictures are only references of how it would look like.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Center height | 280 mm |
| Ø above the bed | 570 mm |
| Spindle nose | |
| Spindle bore | 83 mm |
| Turning speed | 2500 rpm |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| ------------------- | |
| Length x width x height | 2000.0 × 570.0 × 280.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 18/05/2026 |
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1991 |
| Last activity | May 19, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Паралелен струг Weiler E50x2000
Hrotový soustruh Weiler E50x2000
Weiler E50x2000 Konventionel drejebænk
Weiler E50x2000 Spitzendrehmaschine
Παράλληλος τόρνος Weiler E50x2000
Weiler E50x2000 Parallel lathe
Torno paralelo Weiler E50x2000
Tour parallèle Weiler E50x2000
Paralelni tokarski stroj Weiler E50x2000
Weiler E50x2000 Csúcseszterga
Tornio parallelo Weiler E50x2000
Weiler E50x2000 Lygiagrečios tekinimo staklės
Weiler E50x2000 Conventionele draaibank
Tokarka kłowa Weiler E50x2000
Torno paralelo Weiler E50x2000
Strung paralel Weiler E50x2000
Weiler E50x2000 Токарно-винторезный станок
Paralelni strug Weiler E50x2000
Weiler E50x2000 Konventionell svarv
Paralel torna Weiler E50x2000
EN
- Languages
English (GB)