Weeke BMP 195 Wood CNC machining centre Verified seller

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller Verified seller

Client type Reseller
Active since 2013
Offers online 34
Last activity May 13, 2021

Specifications

X stroke 7950 mm
Y stroke 1844 mm
Z stroke 400 mm
Axis nbr 3
Tool changer positions 8
Vacuum pump 100 m³/h
CNC type HOMATIC 2000 IPC, WoodWOP 4.5 "Silverstone"
-------------------
Length x width x height 11950.0 × 5300.0 × 2580.0
Worked hours
Hours under power
State good
At local norms ---------
Status visible

Description

CNC processing centre
Brand: Weeke
Type: BMP 195
Year: 2000

Technical data:

Space requirement
- length approx. 11.950 mm
- width approx. 5.300 mm
- height approx. 2.580 mm

Support table
- Length approx. 6,250 mm
- width approx. 1.300 mm
- height approx. 100 mm

Travel
- X-axis 7,950 mm
- Y-axis 1.844/1.240 mm
- Z-axis 400 mm

Speed
- X-axis 80 m/min.
- Y-axis 80 m/min.
- Z-axis 20 m/min.

Pneumatics
- Compressed air 6 bar

Electronics
- Operating voltage 3 x 400 Volt
- frequency 50/60 Hz
- Total connected load approx. 21.5 kW

Workpiece clamping
- 1 piece vacuum pump with 100 m³/h capacity
- 8 pcs. workpiece support consoles infinitely variable in X-direction
- 8 workpiece stops fixed to the machine frame
- 8 workpiece stops mounted in the workpiece supports
- 4 pieces of side stops mounted in Y-direction on an aluminum profile
- 4 pieces rear stop cylinders
- 8 pieces controlled workpiece insertion aids
- 2 pieces center stop consoles with 2 cylinders each
- 1 set of scales and pointers on the workpiece supports in X and Y direction
- 16 pieces large-area vacuum suction cups, manually hose-free freely positionable
- 8 pieces vacuum suction cups for narrow parts, manually hose-free freely positionable

Vertical drilling technology
2 pieces vertical drilling units 32 spindles
- feed stroke 40 mm
- drive 1,5 kW
- drill holder d=10 mm
- drilling depth max. 38 mm
- total drill length 70 mm
- drill diameter max. 20 mm / max. 35 mm

Milling motor
1 tool change spindle 9 kW -HSK F63
- speed range: infinitely variable 1.250 1/min - 24.000 1/min, programmable
- Drive: frequency controlled three-phase motor
- drive power: 7,5 / 9 kW in continuous and intermittent operation

Tool change magazine for 8 places
- tool diameter: max. 100 mm at full capacity
- possible tool diameter: max. 160 mm with smaller tool diameters or free space on the secondary stations

Hardware system HOMATIC 2000 IPC

WoodWOP 4.5 "Silverstone" software

1 hand terminal to control the machine
Hand terminal with potentiometer and emergency stop switch to control the machine

Grooving saw for X-direction
- Speed 4.125 1/min.
- Direction of rotation right
- power 1,5 kW

horizontal drilling gear with 6 spindles
individually callable
With separate drive 1.5 kW, 3 spindles each arranged left and right in X-direction

Aggregate interface for the main spindle

HSK 63 drilling, 7 spindles (grid 32 mm)
not individually callable
- direction of rotation right/left
- Speed 4.500 1/min.

Vertical. Indenting unit for threaded sockets

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Contact the seller