Computerslicer CCS 903
Touch Control
Elau drive
High Capacity Slicing and Portioning Machine with complete weighing
line for fixed weight portions and with automatic loader.
High performance Slicer for slicing meat, sausage and cheese
products into slices with adjustable thickness of 0.1 up to 50 mm.
Slicing throat, width continuously adjustable up to 440 mm,
(depending on machine execution).
Machine control system with user-friendly interface.
Machine made completely of solid stainless steel.
Product carrier PZF 10.20.11.010
Carrier unit for product length up to 1.200 mm.
Product support belt. The support belt moves forward up to the slicing bar
after the loading procedure. At the end of each slicing procedure the support
belt is pulled back pneumatically and in this way clears an opening for the
ejection of the end pieces. The conveyor belt runs synchronously with the
gripper by which it is driven. The support conveyor and the conveyor belt can
be removed from the machine.
Execution ground and polished
with lateral pressure device
The clearance height can be progressively adjusted from 125 to 180 mm.
Transfer unit CCU 15.00.10.000
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. The basic function can be
implemented with each CCU variant. The transfer unit is attached to the
discharge side of the Slicer. It can be set progressively in a horizontal
or vertical position or at an angle. The transport means and the rollers
can be easily removed for cleaning.
CCU Standard with portioning- and control conveyor as well as with:
Portion completion
Portion completion is a function to move incomplete portions from the
portioning conveyor to the control conveyor at the end of a slicing
procedure. These portions are returned on the portioning conveyor in order
for them to be completed once the next slicing procedure begins. The portion
is then transferred to the control conveyor for further transport to the
subsequent units.
Portioning conveyor with flat belts,
Length of portioning conveyor approx. 190 mm.
Control conveyor with round belts and transfer needles.
Length of control conveyor adjustable from approx. 480 - 540 mm
Slice folding device CFV 10.00.00.000
The device folds each of the individual slices while they are being placed on
the portioning conveyor in order to be split up into portions.
The device is suitable for processing soft products with a diameter or a
product height of at least 90 mm.
Slicing bar SKS 20.00.00.000
Slicing bar carrier with external gap adjustement.
With this system, it is possible to adjust the cutting gap progressively
from the operator side of the machine housing.
The clearance height can be adjusted in steps.
Slicing bar horizontal, straight.
Knife head MKF 15.00.00.000
Idle cut involute knife head WSK 3
Drive for idle cut support for speeds from 200 to 1,500 revolutions per minute.
The additional idle cut support largely prevents the product-related
tendency to form scraps and ensures that the first and last slices of a
portion are parallel.
Top product guide PVO 10.20.00.000
Drive system for guiding the product from above, attached to the knifehead
housing. The system is used to accommodate and drive product guide units. In
addition, pneumatic downholders can be attached to the system.
Recommended for product length of up to 1,200 mm.
The product guide unit is a driven belt which is pneumatically pressed onto
the product from above and helps convey and stop when it comes to idle cuts.
With two product guide units.
Sensor for identification of beginning of product PAS
A photo eye is mounted in the product feed area to identify the beginning or
front of the product.
Loading BEL 20.00.00.000
Loading arm with roller conveyor for lifting the products from a horizontal
position to the feeding level.
The unit is designed for a maximum product length of approx. 1,200 mm
and a maximum product width of approx. 440 mm.
With automatic loading.
Checkweigher CCW-200 20.00.00.000
Digital weighing system with transport speed up to 1,300 mm/s.
For cleaning it, the checkweigher must not be dismantled.
Checkweigher completely made of stainless steel.
Single-checkweigher, consisting of:
1x weighing table, length approx. 485 mm, width approx. 510 mm
capacity up to 100 weight measurements/min. (depending on portions)
max. weight of portion: 3.000 g, resolution 0.2 g
weighing table with round belts.
Rocker CCR-100 10.00.00.010
Rocker enclosed in washdown proof stainless steel cabinet
Mono rocker
length 450 mm.
Execution with round belts
Rocker with small transitions infeed-sided to achieve a smoother transport
of sliced portions. Length of rocker extended about 120 mm.
Total Length approx. 570 mm
Speed-Loader CCA 20.40.20.450
Automatic high-speed loader, providing the die formats for the packaging
machine and infeeding them into it. Loader housing in lift design. All belts
are powered by speed-driven servo motors. The transport equipment can be
easily removed for cleaning. The line divider is positioned by a servo-driven
ball roller spindle. The photoelectric barriers are shock-protected. The
speed-loader has its own controller which is linked to the machine
controller. The Slicer and loader are both operated from the same position.
The maximum diameter of the lower film roller of the packaging machine
is 800 mm.
Basic model includes:
- cut off length (thermoforming machine) up to 1200 mm
- transport conveyor with trapezoidal belts
- without line dividing
- 2-track grouping conveyor
- buffer conveyors
- infeed conveyor
- loader housing in lift design - grouping,
buffer and infeed conveyor with conveyor belts.
In certain cases the speed-loader CCA works as loading aid only,
manual correction might be necessary.
2-track line dividing, with separate drives
Line dividing 1 to X and 2 to X
4-track grouping conveyor,
lengt approx. 500 mm.
inlcuding additional tensioning piece 3-tracks for the grouping conveyor
With 4 buffering conveyors,
length approx. 500 mm.
Infeed conveyor
usable width approx. 520 mm,
length of conveyor approx. 1,500 mm.
WITH upper reject conveyor
Additional increase of the feet SFE 30.00.00.000
The increase mainly consists of spacers
in order to equal irregularities of the floor.
For Slicer model MCS.
1 Pc. Weber-knife, sickle shaped WSM 00.10.10.400
without teeth
Teflon plated, cutting edge uncoated.
Distance centre of rotor to cutting edge 400 mm
1 Pc. blade guard for Weber knife, sickle shaped
Blade guard for Weber knife, sickle shaped, distance 400 mm.
2 Pcs. Automatic product gripper
for product caliber from 95 up to 105 mm
for meat- and sausage products
- used slicing line, fully reconditioned
Remarks:
Product grippers, downholders and knives are chosen in accordance with the
original customer's products only after putting the machine into operation
and will therefore be invoiced only on delivery! For automatic products
grippers in combination with preformed slicing bars an application technology
test is always necessary!

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2011
Offers online 7
Last activity March 28, 2024

Description

Computerslicer CCS 903
Touch Control
Elau drive
High Capacity Slicing and Portioning Machine with complete weighing
line for fixed weight portions and with automatic loader.
High performance Slicer for slicing meat, sausage and cheese
products into slices with adjustable thickness of 0.1 up to 50 mm.
Slicing throat, width continuously adjustable up to 440 mm,
(depending on machine execution).
Machine control system with user-friendly interface.
Machine made completely of solid stainless steel.
Product carrier PZF 10.20.11.010
Carrier unit for product length up to 1.200 mm.
Product support belt. The support belt moves forward up to the slicing bar
after the loading procedure. At the end of each slicing procedure the support
belt is pulled back pneumatically and in this way clears an opening for the
ejection of the end pieces. The conveyor belt runs synchronously with the
gripper by which it is driven. The support conveyor and the conveyor belt can
be removed from the machine.
Execution ground and polished
with lateral pressure device
The clearance height can be progressively adjusted from 125 to 180 mm.
Transfer unit CCU 15.00.10.000
The transfer unit consists mainly of a portioning conveyor and a control
conveyor. The portioning conveyor picks up the slices cut by the Slicer,
divides them into portions and passes them on to the control conveyor for
further transport to the subsequent units. The basic function can be
implemented with each CCU variant. The transfer unit is attached to the
discharge side of the Slicer. It can be set progressively in a horizontal
or vertical position or at an angle. The transport means and the rollers
can be easily removed for cleaning.
CCU Standard with portioning- and control conveyor as well as with:
Portion completion
Portion completion is a function to move incomplete portions from the
portioning conveyor to the control conveyor at the end of a slicing
procedure. These portions are returned on the portioning conveyor in order
for them to be completed once the next slicing procedure begins. The portion
is then transferred to the control conveyor for further transport to the
subsequent units.
Portioning conveyor with flat belts,
Length of portioning conveyor approx. 190 mm.
Control conveyor with round belts and transfer needles.
Length of control conveyor adjustable from approx. 480 - 540 mm
Slice folding device CFV 10.00.00.000
The device folds each of the individual slices while they are being placed on
the portioning conveyor in order to be split up into portions.
The device is suitable for processing soft products with a diameter or a
product height of at least 90 mm.
Slicing bar SKS 20.00.00.000
Slicing bar carrier with external gap adjustement.
With this system, it is possible to adjust the cutting gap progressively
from the operator side of the machine housing.
The clearance height can be adjusted in steps.
Slicing bar horizontal, straight.
Knife head MKF 15.00.00.000
Idle cut involute knife head WSK 3
Drive for idle cut support for speeds from 200 to 1,500 revolutions per minute.
The additional idle cut support largely prevents the product-related
tendency to form scraps and ensures that the first and last slices of a
portion are parallel.
Top product guide PVO 10.20.00.000
Drive system for guiding the product from above, attached to the knifehead
housing. The system is used to accommodate and drive product guide units. In
addition, pneumatic downholders can be attached to the system.
Recommended for product length of up to 1,200 mm.
The product guide unit is a driven belt which is pneumatically pressed onto
the product from above and helps convey and stop when it comes to idle cuts.
With two product guide units.
Sensor for identification of beginning of product PAS
A photo eye is mounted in the product feed area to identify the beginning or
front of the product.
Loading BEL 20.00.00.000
Loading arm with roller conveyor for lifting the products from a horizontal
position to the feeding level.
The unit is designed for a maximum product length of approx. 1,200 mm
and a maximum product width of approx. 440 mm.
With automatic loading.
Checkweigher CCW-200 20.00.00.000
Digital weighing system with transport speed up to 1,300 mm/s.
For cleaning it, the checkweigher must not be dismantled.
Checkweigher completely made of stainless steel.
Single-checkweigher, consisting of:
1x weighing table, length approx. 485 mm, width approx. 510 mm
capacity up to 100 weight measurements/min. (depending on portions)
max. weight of portion: 3.000 g, resolution 0.2 g
weighing table with round belts.
Rocker CCR-100 10.00.00.010
Rocker enclosed in washdown proof stainless steel cabinet
Mono rocker
length 450 mm.
Execution with round belts
Rocker with small transitions infeed-sided to achieve a smoother transport
of sliced portions. Length of rocker extended about 120 mm.
Total Length approx. 570 mm
Speed-Loader CCA 20.40.20.450
Automatic high-speed loader, providing the die formats for the packaging
machine and infeeding them into it. Loader housing in lift design. All belts
are powered by speed-driven servo motors. The transport equipment can be
easily removed for cleaning. The line divider is positioned by a servo-driven
ball roller spindle. The photoelectric barriers are shock-protected. The
speed-loader has its own controller which is linked to the machine
controller. The Slicer and loader are both operated from the same position.
The maximum diameter of the lower film roller of the packaging machine
is 800 mm.
Basic model includes:
- cut off length (thermoforming machine) up to 1200 mm
- transport conveyor with trapezoidal belts
- without line dividing
- 2-track grouping conveyor
- buffer conveyors
- infeed conveyor
- loader housing in lift design - grouping,
buffer and infeed conveyor with conveyor belts.
In certain cases the speed-loader CCA works as loading aid only,
manual correction might be necessary.
2-track line dividing, with separate drives
Line dividing 1 to X and 2 to X
4-track grouping conveyor,
lengt approx. 500 mm.
inlcuding additional tensioning piece 3-tracks for the grouping conveyor
With 4 buffering conveyors,
length approx. 500 mm.
Infeed conveyor
usable width approx. 520 mm,
length of conveyor approx. 1,500 mm.
WITH upper reject conveyor
Additional increase of the feet SFE 30.00.00.000
The increase mainly consists of spacers
in order to equal irregularities of the floor.
For Slicer model MCS.
1 Pc. Weber-knife, sickle shaped WSM 00.10.10.400
without teeth
Teflon plated, cutting edge uncoated.
Distance centre of rotor to cutting edge 400 mm
1 Pc. blade guard for Weber knife, sickle shaped
Blade guard for Weber knife, sickle shaped, distance 400 mm.
2 Pcs. Automatic product gripper
for product caliber from 95 up to 105 mm
for meat- and sausage products
- used slicing line, fully reconditioned
Remarks:
Product grippers, downholders and knives are chosen in accordance with the
original customer's products only after putting the machine into operation
and will therefore be invoiced only on delivery! For automatic products
grippers in combination with preformed slicing bars an application technology
test is always necessary!

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2011
Offers online 7
Last activity March 28, 2024

Here is a selection of similar machines

Reconditioned Weber CCS 903 MCS Cutter