You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type Reseller
Active since 2012
Offers online 21
Last activity Sept. 17, 2020


Cutting length 3050 mm
Max. thickness 10 mm
Max cutting angle 3 °
Min cutting angle 1 °
Back gauge type Motorised Backgauge
Backgauge adjustment 750 mm
Length x width x height 3850.0 × 3220.0 × 2100.0
Weight 9700 kg
Worked hours
Hours under power
State excellent
At local norms yes


The used WARCOM MAXIMA 30-08 / 10 hydraulic shear is in very good condition, equipped with barriers with double pair of photocells, hydraulic plate presses, pedal control, motorized rear register, control panel for programming cutting cycles, cylinders to double effect, connected together with a series circuit and controlling the descent and ascent of the blade holder.

The locking of the sheet is obtained by means of a series of hydraulic cylinders called sheet metal reels, which are operated before the blade holder is lowered with a pressure adjustable by means of a sequence valve. The adjustable initial pressure makes it very useful for cutting aluminum or thin sheet metal, which could be damaged by excessive pressing of the cylinders.
The maximum pressure is adjusted automatically with the cutting forces.

Variable cutting angle device allows the machine to be used at maximum performance for best results.

The machine is equipped with two work cycles that can be selected by means of a selector on the control panel; in fact, we have a limited cycle and a complete cycle.

The limited cycle occurs by pressing the foot pedal button, causing the blade holder to go down, and then releasing it, bringing the blade holder to the top dead center; this operation is very useful on tracking and cutting jobs.

The complete cycle is obtained by pressing the pedal button, causing the blade holder to go down at the end of the cut, and then make it rise to the top dead center.

Technical characteristics of the WARCOM MAXIMA shear 30-08 / 10

    Effective cutting length: 3050 mm
    Passage between the uprights: 3150 mm
    Recess depth in the uprights: 500 mm
    Cutting capacity: R = 42 Kg / mmq
    Nominal angle: 2 °
    2nd nominal thickness: 8 mm
    3rd maximum thickness: 10 mm
    Cutting angle: 0 ° 30'-3 °
    Rear guide adjustment: 750 mm
    Theoretical shots per minute (min / max): 10/22 Number of shots
    Engine power: 20 Hp
    Power supply: 400V - 50Hz - 3Ph
    Working pressure: 250 Bar
    Amount of oil in the tank: 200 Lt
    Dimensions: 3850 x 3220 x 2100 h mm
    Approximate weight: 9700 Kg

Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines


Contact the seller