| Manufacturer | Virgino Rimoldi |
|---|---|
| Model | TMF RN160AV |
| Year | |
| Location | Portugal
|
This listing is for one Virgino Rimoldi roll slitting machine, model TMF RN160AV, designed for cutting fabric rolls into tapes of various widths. The machine is constructed with a sturdy green-painted metal frame supported by a wooden block beneath the long horizontal arm. The paint surface shows signs of wear, including scratches, chipped areas, and minor rust spots, indicating previous use. Some metal components exhibit visible dust and slight corrosion.
The cutting system features a motorized disc blade synchronized with a rotating spindle or shaft that extends horizontally through the machine. This shaft is designed to support the fabric roll by fitting into the cardboard tube around which the fabric is wound. The shaft includes a measurement scale marked from 20 to 130 mm, allowing precise adjustment of strip widths within this range. An adjustment dial is also present at the end of the shaft to facilitate fine-tuning.
Control of the machine is managed via a panel located on the left side, equipped with three rotary knobs and a red indicator light, along with a lever and handle for manual feed operations. The motor and belt drive assembly are housed within the machine, although some internal metal parts show signs of dust and corrosion.
Key technical specifications include a maximum cutting width of 1600 mm, a maximum cutting height (diameter) of 230 mm, and a roll holder bar diameter of 45 mm, compatible with cardboard tubes having inside diameters of 46 mm and outside diameters of 50 mm. The machine is suitable for producing fabric strips from 20 mm up to 130 mm wide, with the rotation of the shaft synchronized to the disc blade to ensure clean and precise cuts. This equipment is made in Italy by S.P.A. Virgino Rimoldi & C., Milano, and operates on a voltage of 220/380 V as indicated on the metal identification plate.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV.
Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias.
Cutting system with motorized disc blade and manual feed.
The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on.
The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut.
Device for sharpening the disc blade.
Width of the strips to cut: from 20 to 130 mm.
Maximum width of the fabric roll: 1,600 mm.
Maximum cutting diameter 230 mm.
Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 88 |
| Last activity | July 13, 2026 |
1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV.
Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias.
Cutting system with motorized disc blade and manual feed.
The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on.
The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut.
Device for sharpening the disc blade.
Width of the strips to cut: from 20 to 130 mm.
Maximum width of the fabric roll: 1,600 mm.
Maximum cutting diameter 230 mm.
Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
This listing is for one Virgino Rimoldi roll slitting machine, model TMF RN160AV, designed for cutting fabric rolls into tapes of various widths. The machine is constructed with a sturdy green-painted metal frame supported by a wooden block beneath the long horizontal arm. The paint surface shows signs of wear, including scratches, chipped areas, and minor rust spots, indicating previous use. Some metal components exhibit visible dust and slight corrosion.
The cutting system features a motorized disc blade synchronized with a rotating spindle or shaft that extends horizontally through the machine. This shaft is designed to support the fabric roll by fitting into the cardboard tube around which the fabric is wound. The shaft includes a measurement scale marked from 20 to 130 mm, allowing precise adjustment of strip widths within this range. An adjustment dial is also present at the end of the shaft to facilitate fine-tuning.
Control of the machine is managed via a panel located on the left side, equipped with three rotary knobs and a red indicator light, along with a lever and handle for manual feed operations. The motor and belt drive assembly are housed within the machine, although some internal metal parts show signs of dust and corrosion.
Key technical specifications include a maximum cutting width of 1600 mm, a maximum cutting height (diameter) of 230 mm, and a roll holder bar diameter of 45 mm, compatible with cardboard tubes having inside diameters of 46 mm and outside diameters of 50 mm. The machine is suitable for producing fabric strips from 20 mm up to 130 mm wide, with the rotation of the shaft synchronized to the disc blade to ensure clean and precise cuts. This equipment is made in Italy by S.P.A. Virgino Rimoldi & C., Milano, and operates on a voltage of 220/380 V as indicated on the metal identification plate.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 88 |
| Last activity | July 13, 2026 |
Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV Automatizovaný řezací stroj
Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV Automatische Schneidemaschine
Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV Automated cutting machine
Cortadora automatizada Virgino Rimoldi TMF RN160AV
Automate de découpe Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV
Macchina da taglio automatica Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV
Maszyna automatyczna do cięcia Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV Автоматическая раскройная машина
Virgino Rimoldi TMF RN160AV
Virgino Rimoldi TMF RN160AV
Otomatik kesim makinesi Virgino Rimoldi TMF RN160AV
EN
- Languages
English (GB)