Sorry, this offer is no longer available on Exapro

Used IMA Advantage 70 edgebander

Here is a selection of similar machines

edgebander is designed for edging the periphery of the rolls from 3 mm to 8 mm,
adapted version of the standard to the following materials:
- melamine and veneer bands from 0.4 - 1.2 mm
- Strips up PVC, ABS 0.5 - 3.0 mm
- Wooden strips up to 8.0 mm

Edgebanders Advantage Series are characterized by heavy, stable body, motors with high power, reliability and longevity.

They are adapted to load two and three shift.
Flange height: max. 55 mm min. 14 mm
edge thickness: max. 12 mm min. 0.4 mm
panel thickness: max. 50 mm min. 10 mm
panel width: min. 65 mm (the minimum length. Approx. 300 mm)
length plate: min. 150 mm (with a width of min. Approx. 120
mm)
Edgeband cross-section: max. 12 x 55 mm
eject the disc out of the tape guide 35 mm.
Equipment machine:
- Advantage machine 70 as a left-side of the machining feed of 16 m / min., For application to the periphery of 3 mm or strips up to 8.0 mm, together with support plate and the clamp roller inverter and an electronic motor braking.
- List of spare parts and instruction manual in Polish.
- The computer control system.
- Touch screen "touch - screen"
- Ruler introductory CD standard is not heated, manually adjustable.
- Heater plate edge
- Edgebanding aggregate (283.1513):
0.8 l tank adhesive with quick-change system pot Quick-Lock-System
magazine for 1 roll edge
Five pressure rollers
gear drive enclosed in a sealed sump
- Aggregate trimming excess edges at the beginning and end of the disc (08,415), 2x 660 W, with pneumatic adjustment of the cutting angle.
- Milling unit (08.0555) for milling the excess edges of the top and bottom and milling wooden slats on the face, the engine 1 x 1000 W, zfalownikiem and holder HSK.
- Multifunctional unit MFA (08,346), 2 x 660 W, with vertical and horizontal distance sensor, the milling radius of 2 mm, to copy corners of PVC and ABS in passing.
- Cyclin profiling with manual adjustment of the roller (08,519), Slide-ray
1.2 or 3 mm together with a chip tray.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Board thickness 60 mm
Edge thickness 3 mm
Feed advance 16 m/min
Sound-proof cabin Yes
Glue tank Yes
-------------------
Length x width x height 7766.0 × 1600.0 × 1600.0
Weight 4000 kg
Worked hours
Hours under power
State excellent
At local norms ---------
Status
Datasheet IMA Advantage 70
Client type User – small or medium company
Active since 2016
Offers online 0
Last activity June 18, 2023

Description

edgebander is designed for edging the periphery of the rolls from 3 mm to 8 mm,
adapted version of the standard to the following materials:
- melamine and veneer bands from 0.4 - 1.2 mm
- Strips up PVC, ABS 0.5 - 3.0 mm
- Wooden strips up to 8.0 mm

Edgebanders Advantage Series are characterized by heavy, stable body, motors with high power, reliability and longevity.

They are adapted to load two and three shift.
Flange height: max. 55 mm min. 14 mm
edge thickness: max. 12 mm min. 0.4 mm
panel thickness: max. 50 mm min. 10 mm
panel width: min. 65 mm (the minimum length. Approx. 300 mm)
length plate: min. 150 mm (with a width of min. Approx. 120
mm)
Edgeband cross-section: max. 12 x 55 mm
eject the disc out of the tape guide 35 mm.
Equipment machine:
- Advantage machine 70 as a left-side of the machining feed of 16 m / min., For application to the periphery of 3 mm or strips up to 8.0 mm, together with support plate and the clamp roller inverter and an electronic motor braking.
- List of spare parts and instruction manual in Polish.
- The computer control system.
- Touch screen "touch - screen"
- Ruler introductory CD standard is not heated, manually adjustable.
- Heater plate edge
- Edgebanding aggregate (283.1513):
0.8 l tank adhesive with quick-change system pot Quick-Lock-System
magazine for 1 roll edge
Five pressure rollers
gear drive enclosed in a sealed sump
- Aggregate trimming excess edges at the beginning and end of the disc (08,415), 2x 660 W, with pneumatic adjustment of the cutting angle.
- Milling unit (08.0555) for milling the excess edges of the top and bottom and milling wooden slats on the face, the engine 1 x 1000 W, zfalownikiem and holder HSK.
- Multifunctional unit MFA (08,346), 2 x 660 W, with vertical and horizontal distance sensor, the milling radius of 2 mm, to copy corners of PVC and ABS in passing.
- Cyclin profiling with manual adjustment of the roller (08,519), Slide-ray
1.2 or 3 mm together with a chip tray.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Board thickness 60 mm
Edge thickness 3 mm
Feed advance 16 m/min
Sound-proof cabin Yes
Glue tank Yes
-------------------
Length x width x height 7766.0 × 1600.0 × 1600.0
Weight 4000 kg
Worked hours
Hours under power
State excellent
At local norms ---------
Status

About this seller

Client type User – small or medium company
Active since 2016
Offers online 0
Last activity June 18, 2023