This MATEC 30 HV (2003) Vertical Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine is equipped with a main spindle type DMS 112 with speed range up to max. 12,000 min/-1 and drive power 30 kW. It has a NC swivel head (Sauter) with swiveling +/- 90 ° and graduation +/- 3 arc seconds. In addition it runs with a tool changer with 48 positions and a HSK A63 tool holder. The table is a NC rotary table with a clamping surface of 3,500 x 835 mm and 7 T-slots. IKZ 70 bar, paper belt filter and chip conveyor (ejection height 1200mm) and 3D radio measuring probe come with the machine. The machine is prepared with a 4th axis interface. The condition of the machine is very good - it is still in production and maintenance service has been applied regularly according to manufacturer's standards. An on-site inspection is possible at any time.

Machine width: 7000 mm
Machine depth: 6000 mm
Machine height: 4000 mm
Machine weight: 15000 kg
CNC: BOSCH TYPE 3 OSA
Spindle speed range: 12,000 min/-1
Spindle motor power: 30 kW
Number of axis: 3
X-Axis Movement: 3000 mm
X-Axis Rapid Traverse: 30 m/min
Y-Axis Movement: 800 mm
Y-Axis Rapid Traverse: 30 m/min
Z-Axis Movement: 1100 mm
Z-Axis Rapid Traverse: 30 m/min
Type of tool holder: HSK 63 A
Chip conveyor: Yes
Internal cooling: Yes
Coolant system: Internal coolant supply 70 bar // Cooling unit for switch cabinet
Paper belt filter Flushing gun
Chip conveyor: Ejection height 1200mm
3D radio measuring probe
Direct measuring systems x-y-z

Main spindle: type dms 112 // max. Torque 190 nm // drilling capacity steel approx. 60 mm // milling capacity approx. 500 cm³ // thread cutting m30
Feed rates: rapid traverse (x / y / z) 30 m/min // feed speed 30,000 mm/min
Nc swivel head: sauter swiveling +/- 90 ° // pitch +/- 3 arc seconds
Work table: table clamping surface 3,500 x 835 mm // t-slots 7x // t-slots - width 18-h7 // nc rotary table sempuco skh 4/630 // horizontal faceplate // faceplate diameter 630mm // embedded in the machine table
Tool changer: number of tool positions 48 pos.
Total connected load: 60kva
Fully enclosed work area
Loading doors suitable for crane loading // automatic opening // movable partition wall
Clamping hydraulics interface 4th axis // nc rotary table rw/nc 160/250 (hofmann)
Face plate diameter 250mm // center height 160mm // hydraulic tailstock with quill mk4
Machine still under production and can be inspected at any time
The machine has been serviced every year by the service department and is technically in good condition
Full documentation included // Declaration of conformity // Replacement screen installed

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 3000 mm
Axis Y 800 mm
Axis Z 1100 mm
Rotary table (4th axis) yes
Type of CNC BOSCH TYPE 3 OSA
Table length 3500 mm
Table width 835 mm
Max. part weight 3500 kg
Number of tool pockets 48
Spindle taper HSK 63 A
Max. spindle speed 12000 rpm
Spindle motor power 30 kW
-------------------
Length x width x height 7000.0 × 6000.0 × 4000.0
Weight 15000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Matec 30 HV
Client type Reseller
Active since 2019
Offers online 939
Last activity March 28, 2024

Description

This MATEC 30 HV (2003) Vertical Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine is equipped with a main spindle type DMS 112 with speed range up to max. 12,000 min/-1 and drive power 30 kW. It has a NC swivel head (Sauter) with swiveling +/- 90 ° and graduation +/- 3 arc seconds. In addition it runs with a tool changer with 48 positions and a HSK A63 tool holder. The table is a NC rotary table with a clamping surface of 3,500 x 835 mm and 7 T-slots. IKZ 70 bar, paper belt filter and chip conveyor (ejection height 1200mm) and 3D radio measuring probe come with the machine. The machine is prepared with a 4th axis interface. The condition of the machine is very good - it is still in production and maintenance service has been applied regularly according to manufacturer's standards. An on-site inspection is possible at any time.

Machine width: 7000 mm
Machine depth: 6000 mm
Machine height: 4000 mm
Machine weight: 15000 kg
CNC: BOSCH TYPE 3 OSA
Spindle speed range: 12,000 min/-1
Spindle motor power: 30 kW
Number of axis: 3
X-Axis Movement: 3000 mm
X-Axis Rapid Traverse: 30 m/min
Y-Axis Movement: 800 mm
Y-Axis Rapid Traverse: 30 m/min
Z-Axis Movement: 1100 mm
Z-Axis Rapid Traverse: 30 m/min
Type of tool holder: HSK 63 A
Chip conveyor: Yes
Internal cooling: Yes
Coolant system: Internal coolant supply 70 bar // Cooling unit for switch cabinet
Paper belt filter Flushing gun
Chip conveyor: Ejection height 1200mm
3D radio measuring probe
Direct measuring systems x-y-z

Main spindle: type dms 112 // max. Torque 190 nm // drilling capacity steel approx. 60 mm // milling capacity approx. 500 cm³ // thread cutting m30
Feed rates: rapid traverse (x / y / z) 30 m/min // feed speed 30,000 mm/min
Nc swivel head: sauter swiveling +/- 90 ° // pitch +/- 3 arc seconds
Work table: table clamping surface 3,500 x 835 mm // t-slots 7x // t-slots - width 18-h7 // nc rotary table sempuco skh 4/630 // horizontal faceplate // faceplate diameter 630mm // embedded in the machine table
Tool changer: number of tool positions 48 pos.
Total connected load: 60kva
Fully enclosed work area
Loading doors suitable for crane loading // automatic opening // movable partition wall
Clamping hydraulics interface 4th axis // nc rotary table rw/nc 160/250 (hofmann)
Face plate diameter 250mm // center height 160mm // hydraulic tailstock with quill mk4
Machine still under production and can be inspected at any time
The machine has been serviced every year by the service department and is technically in good condition
Full documentation included // Declaration of conformity // Replacement screen installed

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 3000 mm
Axis Y 800 mm
Axis Z 1100 mm
Rotary table (4th axis) yes
Type of CNC BOSCH TYPE 3 OSA
Table length 3500 mm
Table width 835 mm
Max. part weight 3500 kg
Number of tool pockets 48
Spindle taper HSK 63 A
Max. spindle speed 12000 rpm
Spindle motor power 30 kW
-------------------
Length x width x height 7000.0 × 6000.0 × 4000.0
Weight 15000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 939
Last activity March 28, 2024

Here is a selection of similar machines

Matec 30 HV Machining center - vertical