Price on request
Make an offer| CNC | no |
| CNC type | |
| ------------------- | |
| Length x width x height | 5500.0 × 2500.0 × 1500.0 |
| Weight | 2200 kg |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | |
| Last availability date | 27/02/2026 |
This Automatic 3D Wire Bender, manufactured in 2022, is designed for precise and efficient bending of wire with diameters ranging from 4 mm to 8 mm. The machine features a robust blue metal frame constructed from thick-walled steel profiles, supporting the entire bending mechanism and pneumatic components. It measures 5500 mm in length, 2500 mm in width, and 1500 mm in height, with a total weight of 2200 kg.
The wire bender is equipped with a wire feeding module that includes a wire magazine capable of holding up to 150 kg of wire. The magazine can accommodate between 350 to 1400 wires depending on their diameter (from 8 mm to 4 mm). The feeding system uses a selector mechanism to push the wire to the bending head, which performs all programmed bends automatically. Processed wires are deposited into a receiving basket or onto a supporting table.
The bending head includes metal forming rollers and a red clamp device that secure the wire during bending. A black and orange cable carrier guides cables to the moving bending head, which is actuated pneumatically or hydraulically. The machine incorporates a linear guide rail and mechanical linkages to ensure precise positioning.
Control is managed via an operator panel featuring a touchscreen and labeled buttons such as START, EMERGENCY, RESET, PAUZA, and STOP. The panel surface shows minor dirt but remains intact and functional.
The machine operates with a 15 kW drive power, requires a 3x380 V 50 Hz power supply, and uses compressed air at 8 bar with an air consumption of 450 Nl/min. It is designed to work in ambient temperatures between 5 and 30 °C. The machine shows some minor dust and light surface wear on rollers but no visible damage or rust, indicating it is structurally intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Automatic 3D wire bender, built in Poland in 2022, is designed for automatic bending of wire with a maximum diameter of 8 mm. The wire bender is characterized by a solid frame made of thick-walled steel profiles, as well as precise bending and high reliability.
The 3D stirrup bender has a wire feeding module consisting of a cut wire magazine and a selector mechanism as well as a bending head with a trolley and grippers. The processed wires are selected from the warehouse with a capacity of 150 kg, and then fed and pushed to the bending head, which performs all programmed bends. After processing, the detail falls into the receiving basket or on the supporting table.
The machine for automatic wire bending is controlled by an operator panel with an installed PLC controller, which controls the efficiency and reliability of the device. The total weight of the machine is 2,200 kg.
Technical data of the rebar bender
- PLC driver
- capacity: 4 pcs / min
- minimum wire diameter: 4 mm
- maximum wire diameter: 8 mm
- wire magazine with a feeder
- magazine capacity: 150 kg
- maximum number of charging wires: 350-1400 (from fi 8 to fi4)
- drive power: 15 kW
- air consumption: 450 Nl / min
- pneumatic pressure: 8 bar
- power supply: 3x380 V 50 Hz
- working temperature: 5-30 ° C
- dimensions (length x width x height): 5500 x 2500 x 1500 mm
- total weight of the bender: 2200 kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 391 |
| Last activity | March 10, 2026 |
Automatic 3D wire bender, built in Poland in 2022, is designed for automatic bending of wire with a maximum diameter of 8 mm. The wire bender is characterized by a solid frame made of thick-walled steel profiles, as well as precise bending and high reliability.
The 3D stirrup bender has a wire feeding module consisting of a cut wire magazine and a selector mechanism as well as a bending head with a trolley and grippers. The processed wires are selected from the warehouse with a capacity of 150 kg, and then fed and pushed to the bending head, which performs all programmed bends. After processing, the detail falls into the receiving basket or on the supporting table.
The machine for automatic wire bending is controlled by an operator panel with an installed PLC controller, which controls the efficiency and reliability of the device. The total weight of the machine is 2,200 kg.
Technical data of the rebar bender
- PLC driver
- capacity: 4 pcs / min
- minimum wire diameter: 4 mm
- maximum wire diameter: 8 mm
- wire magazine with a feeder
- magazine capacity: 150 kg
- maximum number of charging wires: 350-1400 (from fi 8 to fi4)
- drive power: 15 kW
- air consumption: 450 Nl / min
- pneumatic pressure: 8 bar
- power supply: 3x380 V 50 Hz
- working temperature: 5-30 ° C
- dimensions (length x width x height): 5500 x 2500 x 1500 mm
- total weight of the bender: 2200 kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| CNC | no |
| CNC type | |
| ------------------- | |
| Length x width x height | 5500.0 × 2500.0 × 1500.0 |
| Weight | 2200 kg |
| worked hours | |
| hours under power | |
| state | excellent |
| At local norms | --------- |
| status | |
| Last availability date | 27/02/2026 |
This Automatic 3D Wire Bender, manufactured in 2022, is designed for precise and efficient bending of wire with diameters ranging from 4 mm to 8 mm. The machine features a robust blue metal frame constructed from thick-walled steel profiles, supporting the entire bending mechanism and pneumatic components. It measures 5500 mm in length, 2500 mm in width, and 1500 mm in height, with a total weight of 2200 kg.
The wire bender is equipped with a wire feeding module that includes a wire magazine capable of holding up to 150 kg of wire. The magazine can accommodate between 350 to 1400 wires depending on their diameter (from 8 mm to 4 mm). The feeding system uses a selector mechanism to push the wire to the bending head, which performs all programmed bends automatically. Processed wires are deposited into a receiving basket or onto a supporting table.
The bending head includes metal forming rollers and a red clamp device that secure the wire during bending. A black and orange cable carrier guides cables to the moving bending head, which is actuated pneumatically or hydraulically. The machine incorporates a linear guide rail and mechanical linkages to ensure precise positioning.
Control is managed via an operator panel featuring a touchscreen and labeled buttons such as START, EMERGENCY, RESET, PAUZA, and STOP. The panel surface shows minor dirt but remains intact and functional.
The machine operates with a 15 kW drive power, requires a 3x380 V 50 Hz power supply, and uses compressed air at 8 bar with an air consumption of 450 Nl/min. It is designed to work in ambient temperatures between 5 and 30 °C. The machine shows some minor dust and light surface wear on rollers but no visible damage or rust, indicating it is structurally intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 391 |
| Last activity | March 10, 2026 |
Unknown Automatic 3D wire bender
Ohýbačka profilů Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender Profilbiegemaschine
Unknown Automatic 3D wire bender
Automatic 3D wire bender Profile bending machine
Curvadora de perfiles Unknown Automatic 3D wire bender
Cintreuse à profile Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender
Curvaprofili Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender
Giętarka do profili Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender Профилегибочный станок
Unknown Automatic 3D wire bender
Unknown Automatic 3D wire bender
Profil bükme makinesi Unknown Automatic 3D wire bender
EN
- Languages
English (GB)