Price on request
Make an offer| Power in tons | 3000 T |
| Table length | 2000 mm |
| Table width | 6000 mm |
| Ram stroke | 2000 mm |
| Distance between columns | 1460 mm |
| Engine Power | 525 kW |
| ------------------- | |
| Length x width x height | 13800.0 × 390.0 × 9500.0 |
| Weight | 390000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | United 3000 |
| Last availability date | 02/04/2026 |
Manufacturer: United
Model: 3000
Year of Manufacture: 2008
This is a large hydraulic forging press with a nominal force of 3000 tons (30 MN) and an upsetting force of 3500 tons (35 MN). The press features a maximum stroke of 2000 mm and a daylight opening of 3500 mm, allowing for substantial workpiece accommodation. The clear width between columns measures 1460 mm by 2680 mm.
The machine includes two pull-back cylinders and a press center die table with dimensions of 2000 mm width by 6000 mm length, and a ram stroke of 2000 mm. Press speeds vary depending on operation mode, with forging speeds reaching up to 80 mm/sec at 30 MN and upsetting speeds up to 40 mm/sec at 35 MN. The advance and return speeds are adjustable between fast and slow settings, ranging from 10 mm/sec to 300 mm/sec.
Hydraulics are powered by eight high-pressure axial piston pumps, each delivering 500 L/min, manufactured by Rexroth and Oilgear. The electric drive consists of four motors, each rated at 525 kW, 1450 rpm, 2300 volts, class F insulation, with double end shafts.
The press measures 13,800 mm in length, 390 mm in width, and 9,500 mm in height, with a total weight of approximately 390,000 kg.
Control is managed via a Siemens S7-400 PLC system with manual and automatic operation modes.
The machine is painted green and shows signs of industrial use, including surface wear, some paint chipping, and areas of surface rust. Four large vertical cylinders support the press structure. A rotating circular platform base is present at the bottom. The hydraulic cylinders and piston rods have polished metal surfaces, indicating maintenance or refurbishment of these components. Some bolt holes and mounting points are visible on the metal parts.
This press is offered as-is and where-is, with no explicit guarantees regarding operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Item Title: United 3000 Hydraulic Press
Manufacturer: United
Model: 3000
Year of Manufacture: 2008
Technical Condition: Good condition, Retrofitted
Nominal Force (Static Working Pressure): 30 MN (3000 tons)
Upsetting Force (Static Working Pressure): 35 MN (3500 tons)
Maximum Press Stroke: 2000 mm
Press Daylight: 3500 mm
Distance Between Columns (Clear Width): 1460 × 2680 mm
Number of Pull Back Cylinders: 2
Eccentric Loading:
- At 30 MN (In Line of Forging): mm
- At Right Angle to Line of Forging: 200 mm either side (400 mm total)
Press Center Die Table Area (Width × Length × Stroke): 2000 × 6000 × R,L 3000 mm
Press Speeds:
- Forging Speed at 30 MN (3000 tons): Max. 80 mm/sec
- Upsetting Speed at 35 MN (3500 tons): Max. 40 mm/sec
- Advance Speed (Fast/Slow): 250-300 mm/sec / 10 mm/sec
- Return Speed (Fast/Slow): 250-300 mm/sec / 10 mm/sec
- Die Table Slide Forward (Fast/Slow): 250 mm/sec / 5 mm/sec
Press Forces:
- Forging at 320 bar: 30 MN (3000 tons)
- Upsetting at 375 bar: 35 MN (3500 tons)
- Return at 320 bar: 2.5 MN (250 tons)
- Table Shift at 320 bar: 1.2 MN (120 tons)
Number of Press Strokes:
- 2 Cylinders:
- Press Stroke: 150 mm
- Penetration: 300 mm
- Return Stroke: 10/12 strokes per minute
- 2 Cylinders:
- Press Stroke: 100 mm
- Penetration: 200 mm
- Return Stroke: 20/22 strokes per minute
- 2 Cylinders:
- Press Stroke: 5 mm
- Penetration: 20 mm
- Return Stroke: 80/82 strokes per minute
Hydraulic Main Pumps: 8 sets × High Pressure Axial Piston Pump 500 L/min, Rexroth, Oilgear
Electric Main Motors: 4 sets × 525 kW, 1450 rpm, 2300 volt, F class, Double End Shaft
Total Height: 13800 mm
Press Height Above Floor Level: 9500 mm
Depth: Approx. 390 tons
PLC Control System: Siemens S7-400 HMI, Manual, Automatic
Condition: As-is, where-is
Capacity: 3000 tons
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 13, 2026 |
Item Title: United 3000 Hydraulic Press
Manufacturer: United
Model: 3000
Year of Manufacture: 2008
Technical Condition: Good condition, Retrofitted
Nominal Force (Static Working Pressure): 30 MN (3000 tons)
Upsetting Force (Static Working Pressure): 35 MN (3500 tons)
Maximum Press Stroke: 2000 mm
Press Daylight: 3500 mm
Distance Between Columns (Clear Width): 1460 × 2680 mm
Number of Pull Back Cylinders: 2
Eccentric Loading:
- At 30 MN (In Line of Forging): mm
- At Right Angle to Line of Forging: 200 mm either side (400 mm total)
Press Center Die Table Area (Width × Length × Stroke): 2000 × 6000 × R,L 3000 mm
Press Speeds:
- Forging Speed at 30 MN (3000 tons): Max. 80 mm/sec
- Upsetting Speed at 35 MN (3500 tons): Max. 40 mm/sec
- Advance Speed (Fast/Slow): 250-300 mm/sec / 10 mm/sec
- Return Speed (Fast/Slow): 250-300 mm/sec / 10 mm/sec
- Die Table Slide Forward (Fast/Slow): 250 mm/sec / 5 mm/sec
Press Forces:
- Forging at 320 bar: 30 MN (3000 tons)
- Upsetting at 375 bar: 35 MN (3500 tons)
- Return at 320 bar: 2.5 MN (250 tons)
- Table Shift at 320 bar: 1.2 MN (120 tons)
Number of Press Strokes:
- 2 Cylinders:
- Press Stroke: 150 mm
- Penetration: 300 mm
- Return Stroke: 10/12 strokes per minute
- 2 Cylinders:
- Press Stroke: 100 mm
- Penetration: 200 mm
- Return Stroke: 20/22 strokes per minute
- 2 Cylinders:
- Press Stroke: 5 mm
- Penetration: 20 mm
- Return Stroke: 80/82 strokes per minute
Hydraulic Main Pumps: 8 sets × High Pressure Axial Piston Pump 500 L/min, Rexroth, Oilgear
Electric Main Motors: 4 sets × 525 kW, 1450 rpm, 2300 volt, F class, Double End Shaft
Total Height: 13800 mm
Press Height Above Floor Level: 9500 mm
Depth: Approx. 390 tons
PLC Control System: Siemens S7-400 HMI, Manual, Automatic
Condition: As-is, where-is
Capacity: 3000 tons
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 3000 T |
| Table length | 2000 mm |
| Table width | 6000 mm |
| Ram stroke | 2000 mm |
| Distance between columns | 1460 mm |
| Engine Power | 525 kW |
| ------------------- | |
| Length x width x height | 13800.0 × 390.0 × 9500.0 |
| Weight | 390000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | United 3000 |
| Last availability date | 02/04/2026 |
Manufacturer: United
Model: 3000
Year of Manufacture: 2008
This is a large hydraulic forging press with a nominal force of 3000 tons (30 MN) and an upsetting force of 3500 tons (35 MN). The press features a maximum stroke of 2000 mm and a daylight opening of 3500 mm, allowing for substantial workpiece accommodation. The clear width between columns measures 1460 mm by 2680 mm.
The machine includes two pull-back cylinders and a press center die table with dimensions of 2000 mm width by 6000 mm length, and a ram stroke of 2000 mm. Press speeds vary depending on operation mode, with forging speeds reaching up to 80 mm/sec at 30 MN and upsetting speeds up to 40 mm/sec at 35 MN. The advance and return speeds are adjustable between fast and slow settings, ranging from 10 mm/sec to 300 mm/sec.
Hydraulics are powered by eight high-pressure axial piston pumps, each delivering 500 L/min, manufactured by Rexroth and Oilgear. The electric drive consists of four motors, each rated at 525 kW, 1450 rpm, 2300 volts, class F insulation, with double end shafts.
The press measures 13,800 mm in length, 390 mm in width, and 9,500 mm in height, with a total weight of approximately 390,000 kg.
Control is managed via a Siemens S7-400 PLC system with manual and automatic operation modes.
The machine is painted green and shows signs of industrial use, including surface wear, some paint chipping, and areas of surface rust. Four large vertical cylinders support the press structure. A rotating circular platform base is present at the bottom. The hydraulic cylinders and piston rods have polished metal surfaces, indicating maintenance or refurbishment of these components. Some bolt holes and mounting points are visible on the metal parts.
This press is offered as-is and where-is, with no explicit guarantees regarding operational condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 13, 2026 |
Хидравлична преса United 3000
Hydraulický lis United 3000
United 3000 Hydraulisk presse
United 3000 Hydraulische Presse
Υδραυλική πρέσα United 3000
United 3000 Hydraulic press
Prensa hidráulica United 3000
Presse hydraulique United 3000
Hidraulična preša United 3000
United 3000 Hidraulikus prés
Pressa idraulica United 3000
United 3000 Hidraulinis presas
United 3000 Hydraulische pers
Prasa hydrauliczna United 3000
Prensa hidráulica United 3000
Presă hidraulică United 3000
United 3000 Гидравлический пресс
Hidraulična presa United 3000
United 3000 Hydraulpress
Hidrolik pres United 3000
EN
- Languages
English (GB)