Specifications

Nbr of filling stations 9
Max filling range (specify) 273 ml
Current tooling (ex. 1ml, 5 ml, 8 gr...)
Motor Power 10.7 kW
-------------------
Length x width x height 2000.0 × 1300.0 × 2400.0
Worked hours
Hours under power
State good
At local norms ---------
Status

Description

Plastic tube filler
UNIPAC brand
Model U2080
Year 2003
Filling machine for cream, gel and paste type products
Rate 80 strokes/minute
9-station turntable
Tube loader magazine
Insertion station, orientation station, sinking station, filling station and automatic tube heat-sealing station
Touch screen control panel
40 liter hopper in 316L
Minimum dosage 3 ml max. 273ml
Max. temperature hot air 590°C
400 v three-phase / 27 Amp / Power 10.7 Kw / 50 Hz
Compressed air 6/8 bar (about 600 liters/minute)
Water about 2 liters/min.
16 decibels
Instruction manual supplied
Dimensions Filling machine 2000 x 1300 x 2400 mm adjustable feet
Dimensions Charger 1600 x 900 x 2100 mm adjustable feet
TOOLS
4 hoses DN15 clamp connection (valve and spout)
Buckets K Ø 40 + driver + IEK orientator
Cups L Ø 25 40 ml long + pusher + rocker + tip + heating support
E buckets Ø 40 + driver + orientator + IEK tilter + heating ring Ø 40 for IEK format
Buckets C Ø 30 + pusher x 2 + tipper + tip + heating supports + 3 sets of bucket bottoms
J buckets Ø 16 + tilter + driver + orientator + heating head
Buckets G Ø 35 incomplete
Buckets D Ø 50 + driver + orientator x 2 + tilter ND + heater Ø 50 ND + heating ring
Buckets M Ø 25 + tipper
Buckets I Ø 40
Buckets N Ø 50
Buckets B Ø 22 + bottom of buckets + tipper + heater + tip + orientator + driver
Buckets A Ø 19 + 10 bucket bottoms A + 2 driver tips A + 2 orienting tips A + heating ring Ø 19 + heating head support A + tipper A
Loader wheels B Ø 22
Loader wheels IEK Ø 40
Loader wheels J Ø 16
Loader wheels ND Ø 50
Loader wheels C Ø 30
Loader wheels A Ø 19
Loader wheels L/M Ø 25
Vibrating plate wheel X 2
Plate holding tube in loader + loader plate
– Spout A Ø 14
– Spout Ø 28
– Spout G Ø 19
– Spout Ø 22
– Spout Ø 25
– Spout Ø 30
– Spout Ø 11
– Spout Ø 16
(Ø measurement taken on the outside of the spout and not Ø of the tube)
1 box of different parts: seals, incomplete cups, engine
1 case of different letters A, B, C, D, E, P – Number from 0 to 9 – wedges

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Client type Reseller
Active since 2008
Offers online 68
Last activity June 13, 2024

Description

Plastic tube filler
UNIPAC brand
Model U2080
Year 2003
Filling machine for cream, gel and paste type products
Rate 80 strokes/minute
9-station turntable
Tube loader magazine
Insertion station, orientation station, sinking station, filling station and automatic tube heat-sealing station
Touch screen control panel
40 liter hopper in 316L
Minimum dosage 3 ml max. 273ml
Max. temperature hot air 590°C
400 v three-phase / 27 Amp / Power 10.7 Kw / 50 Hz
Compressed air 6/8 bar (about 600 liters/minute)
Water about 2 liters/min.
16 decibels
Instruction manual supplied
Dimensions Filling machine 2000 x 1300 x 2400 mm adjustable feet
Dimensions Charger 1600 x 900 x 2100 mm adjustable feet
TOOLS
4 hoses DN15 clamp connection (valve and spout)
Buckets K Ø 40 + driver + IEK orientator
Cups L Ø 25 40 ml long + pusher + rocker + tip + heating support
E buckets Ø 40 + driver + orientator + IEK tilter + heating ring Ø 40 for IEK format
Buckets C Ø 30 + pusher x 2 + tipper + tip + heating supports + 3 sets of bucket bottoms
J buckets Ø 16 + tilter + driver + orientator + heating head
Buckets G Ø 35 incomplete
Buckets D Ø 50 + driver + orientator x 2 + tilter ND + heater Ø 50 ND + heating ring
Buckets M Ø 25 + tipper
Buckets I Ø 40
Buckets N Ø 50
Buckets B Ø 22 + bottom of buckets + tipper + heater + tip + orientator + driver
Buckets A Ø 19 + 10 bucket bottoms A + 2 driver tips A + 2 orienting tips A + heating ring Ø 19 + heating head support A + tipper A
Loader wheels B Ø 22
Loader wheels IEK Ø 40
Loader wheels J Ø 16
Loader wheels ND Ø 50
Loader wheels C Ø 30
Loader wheels A Ø 19
Loader wheels L/M Ø 25
Vibrating plate wheel X 2
Plate holding tube in loader + loader plate
– Spout A Ø 14
– Spout Ø 28
– Spout G Ø 19
– Spout Ø 22
– Spout Ø 25
– Spout Ø 30
– Spout Ø 11
– Spout Ø 16
(Ø measurement taken on the outside of the spout and not Ø of the tube)
1 box of different parts: seals, incomplete cups, engine
1 case of different letters A, B, C, D, E, P – Number from 0 to 9 – wedges

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Nbr of filling stations 9
Max filling range (specify) 273 ml
Current tooling (ex. 1ml, 5 ml, 8 gr...)
Motor Power 10.7 kW
-------------------
Length x width x height 2000.0 × 1300.0 × 2400.0
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2008
Offers online 68
Last activity June 13, 2024

Here is a selection of similar machines

Unipac U2080 Tube filler