175,000 €
Make an offer| Max. length | 6000 mm |
| Max. thickness | 1.5 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | under power |
| Last availability date | 30/01/2026 |
This Ungerer Cut to Length Line, manufactured in 1966, is designed for processing stainless steel sheets with thicknesses ranging from 0.3 to 1.5 mm and widths between 400 and 1500 mm. It can handle sheet lengths from 750 up to 6000 mm, accommodating package weights of up to 2,500 kg and a maximum coil weight of 15 tons. The coil dimensions supported include an inner diameter of 500 mm and an outer diameter of 1500 mm. The line operates at a speed of 50 meters per minute and is suitable for integration with a sheet rolling machine.
The machine is equipped with a comprehensive set of components including a 15-ton uncoiler, coil car, snubber roll, center positioning unit (CPC), peeler table, pinch roll, side guide, two levellers each with 12+11 rolls, measurement roll, rotary shear, recoiler, stretch film wrapping, rotary shear conveyor (8 m), stacker and stacker conveyor (6 m each), exit conveyor (4 m), and weighing conveyor (4 m).
The line features a hydraulic system by Parker and programmable logic controllers (PLC) from GE Fanuc and Allen Bradley. A camera system is also available to support operation. The machine is oriented for left-to-right line direction and is located in Turkey.
Visually, the machine has a green painted metal body showing signs of wear and some dirt accumulation consistent with use. Multiple clamping units are present on the front side, along with a mounted industrial light fixture for illumination. A control panel with multiple buttons and switches is mounted on the side, and various cables and hydraulic or pneumatic lines are connected to the machine. A large motor or drive unit is visible on the top left side. Overall, the machine shows typical marks of use such as grease and dirt but appears structurally intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
-Stainless Steel :AISI 304, AISI 309, AISI 310, AISI316
-Thickness : 0.3-1.5 mm
-Sheet Width : 400-1500 mm
-Sheet length : 750 – 6000 mm
-Package weight : 2500 kg
-Maximum weight : 15 Ton
-Coil Inner Dia. :500 mm
-Coil Outer Dia. :1500 mm
-Line Speed :50 m/dak.
-Year of manufacture: 1966,
-Line Status :In Operation,
-Camera System :Avaible
-Hydraulic System :Parker
-PLC :GE Fanuc+Allen Bradley
-Extra specification: : It is suitable for adding a sheet rolling machine.
-Location : Turkey
-Line direction : Left to Right
MACHINE LIST
-Uncoiler 15 ton
-Coil Car
-Snubber Roll
-CPC (Center Positioning Unit)
-Peeler table
-Pinch Roll
-Side Guide
-Leveller 1 (12+11 Roll)
-Leveller 2 (12+11 Roll)
-Measurement Roll
-Rotary Shear
-Recoiler
-Stretch Film Wrapping
-Rotary Shear Conveyor (8mt)
-Stacker (6 mt)
-Stacker Conveyor (6 mt)
-Exit Conveyor (4 mt)
-Weighing Conveyor (4 mt)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Consultant / Intermediary |
| Active since | 2017 |
| Offers online | 3 |
| Last activity | Jan. 29, 2026 |
-Stainless Steel :AISI 304, AISI 309, AISI 310, AISI316
-Thickness : 0.3-1.5 mm
-Sheet Width : 400-1500 mm
-Sheet length : 750 – 6000 mm
-Package weight : 2500 kg
-Maximum weight : 15 Ton
-Coil Inner Dia. :500 mm
-Coil Outer Dia. :1500 mm
-Line Speed :50 m/dak.
-Year of manufacture: 1966,
-Line Status :In Operation,
-Camera System :Avaible
-Hydraulic System :Parker
-PLC :GE Fanuc+Allen Bradley
-Extra specification: : It is suitable for adding a sheet rolling machine.
-Location : Turkey
-Line direction : Left to Right
MACHINE LIST
-Uncoiler 15 ton
-Coil Car
-Snubber Roll
-CPC (Center Positioning Unit)
-Peeler table
-Pinch Roll
-Side Guide
-Leveller 1 (12+11 Roll)
-Leveller 2 (12+11 Roll)
-Measurement Roll
-Rotary Shear
-Recoiler
-Stretch Film Wrapping
-Rotary Shear Conveyor (8mt)
-Stacker (6 mt)
-Stacker Conveyor (6 mt)
-Exit Conveyor (4 mt)
-Weighing Conveyor (4 mt)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Max. length | 6000 mm |
| Max. thickness | 1.5 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | under power |
| Last availability date | 30/01/2026 |
This Ungerer Cut to Length Line, manufactured in 1966, is designed for processing stainless steel sheets with thicknesses ranging from 0.3 to 1.5 mm and widths between 400 and 1500 mm. It can handle sheet lengths from 750 up to 6000 mm, accommodating package weights of up to 2,500 kg and a maximum coil weight of 15 tons. The coil dimensions supported include an inner diameter of 500 mm and an outer diameter of 1500 mm. The line operates at a speed of 50 meters per minute and is suitable for integration with a sheet rolling machine.
The machine is equipped with a comprehensive set of components including a 15-ton uncoiler, coil car, snubber roll, center positioning unit (CPC), peeler table, pinch roll, side guide, two levellers each with 12+11 rolls, measurement roll, rotary shear, recoiler, stretch film wrapping, rotary shear conveyor (8 m), stacker and stacker conveyor (6 m each), exit conveyor (4 m), and weighing conveyor (4 m).
The line features a hydraulic system by Parker and programmable logic controllers (PLC) from GE Fanuc and Allen Bradley. A camera system is also available to support operation. The machine is oriented for left-to-right line direction and is located in Turkey.
Visually, the machine has a green painted metal body showing signs of wear and some dirt accumulation consistent with use. Multiple clamping units are present on the front side, along with a mounted industrial light fixture for illumination. A control panel with multiple buttons and switches is mounted on the side, and various cables and hydraulic or pneumatic lines are connected to the machine. A large motor or drive unit is visible on the top left side. Overall, the machine shows typical marks of use such as grease and dirt but appears structurally intact.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2017 |
| Offers online | 3 |
| Last activity | Jan. 29, 2026 |
Ungerer Cut to Length Line
Rovnací stroj Ungerer Cut to Length Line
Ungerer Cut to Length Line
Ungerer Cut to Length Line Richtmaschine
Ungerer Cut to Length Line
Ungerer Cut to Length Line Straightening machine
Aplanadora de chapas Ungerer Cut to Length Line
Planeuse de tôles Ungerer Cut to Length Line
Ungerer Cut to Length Line
Ungerer Cut to Length Line
Spianatrice di lamiera Ungerer Cut to Length Line
Ungerer Cut to Length Line
Ungerer Cut to Length Line
Prostownice do blach Ungerer Cut to Length Line
Ungerer Cut to Length Line
Ungerer Cut to Length Line
Ungerer Cut to Length Line Выпрямитель
Ungerer Cut to Length Line
Ungerer Cut to Length Line
0.3 - 1.5 x 1500 mm Ungerer Cut to Length Line / Boy kesme Hattı
EN
- Languages
English (GB)