Blister machine for PVC/ALU blister
Brand: Uhlmann
Model: UPS 300
Year: 2001
Weight: 1000kg
Dimensions: (L x W x H) 3.70 x 1.00 x 1.50 M

Automatic blister machine with alternating movement for tablets, dragees, capsules, etc... Possibility of making aluminum/alu blisters. Supplement to be expected. The length with its exit conveyor is 3.90 m

Equipped:
Pvc or aluminum film reel holder
PVC film thermoforming station by flat tooling
Manual product distribution station
Aluminum film reel holder
Blister heat-sealing station by flat tooling with embossing printing station (currently without character)
Position for adjusting the length of the "Step" of advancement
Blister die-cutting station
PVC belt conveyor for receiving finished blisters length 600 mm - width 160 mm
PVC belt conveyor length 1800 mm - width 200 mm blister output with alignment system to put them in line and ejection for bad blisters (it does not have a camera for this last function)
Control box with programmer and temperature regulators
General drive by motor-variator
Protective casings

Current tooling:
There is 1 new tool which has never been used and which is sold in addition to the tools with this machine. . Blister 96 x 70 mm of 15 capsules size 0 or 1.
There are several toolings for tablets with this machine

Capacity:
Maximum pvc width 170 mm - maximum diameter 400 mm
Maximum aluminum width 170 mm - maximum diameter 240 mm
Maximum advancement step 108 mm
Maximum thermoforming depth 10 mm (possibility to go down to 18.5 mm with a production of 35/cycles per minute)

Maximum production: 60 cycles/minute (100 to 150 blisters per minute approximately depending on the number of blisters per cycle

Total electric power: 6 kw
Maximum compressed air pressure: 6 to 8 bar

Output conveyor dimension:
Length 1.85 m - width 0.30 m - height 0.30 m

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Moulding length 400 mm
Moulding width 170 mm
Forming depth 10 mm
Max foil width 156 mm
Cycle/min 60
Total power requirement 6 kW
-------------------
Length x width x height 3700.0 × 1000.0 × 1500.0
Weight 1000 kg
Worked hours
Hours under power
State revised
At local norms ---------
Status visible
Datasheet Uhlmann UPS 300
Client type Reseller
Active since 2017
Offers online 41
Last activity March 27, 2024

Description

Blister machine for PVC/ALU blister
Brand: Uhlmann
Model: UPS 300
Year: 2001
Weight: 1000kg
Dimensions: (L x W x H) 3.70 x 1.00 x 1.50 M

Automatic blister machine with alternating movement for tablets, dragees, capsules, etc... Possibility of making aluminum/alu blisters. Supplement to be expected. The length with its exit conveyor is 3.90 m

Equipped:
Pvc or aluminum film reel holder
PVC film thermoforming station by flat tooling
Manual product distribution station
Aluminum film reel holder
Blister heat-sealing station by flat tooling with embossing printing station (currently without character)
Position for adjusting the length of the "Step" of advancement
Blister die-cutting station
PVC belt conveyor for receiving finished blisters length 600 mm - width 160 mm
PVC belt conveyor length 1800 mm - width 200 mm blister output with alignment system to put them in line and ejection for bad blisters (it does not have a camera for this last function)
Control box with programmer and temperature regulators
General drive by motor-variator
Protective casings

Current tooling:
There is 1 new tool which has never been used and which is sold in addition to the tools with this machine. . Blister 96 x 70 mm of 15 capsules size 0 or 1.
There are several toolings for tablets with this machine

Capacity:
Maximum pvc width 170 mm - maximum diameter 400 mm
Maximum aluminum width 170 mm - maximum diameter 240 mm
Maximum advancement step 108 mm
Maximum thermoforming depth 10 mm (possibility to go down to 18.5 mm with a production of 35/cycles per minute)

Maximum production: 60 cycles/minute (100 to 150 blisters per minute approximately depending on the number of blisters per cycle

Total electric power: 6 kw
Maximum compressed air pressure: 6 to 8 bar

Output conveyor dimension:
Length 1.85 m - width 0.30 m - height 0.30 m

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Moulding length 400 mm
Moulding width 170 mm
Forming depth 10 mm
Max foil width 156 mm
Cycle/min 60
Total power requirement 6 kW
-------------------
Length x width x height 3700.0 × 1000.0 × 1500.0
Weight 1000 kg
Worked hours
Hours under power
State revised
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2017
Offers online 41
Last activity March 27, 2024

Here is a selection of similar machines

Uhlmann UPS 300 Blister machine