This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size.
The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment.
PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across the feeding area where the blisters are filled with product.
The filled blisters now pass into the sealing station where they are covered with aluminium top foil which is drawn from a reel mounted above. The heated top sealing plate on this station incorporates coding digits to allow a code to be embossed as the blisters are sealed. Air- operated grippers then pull the web forward through a short cooling plate before they are cut out from the web.
The web now passes into the guillotine cutting station, where the blisters are cut out and discharged down a chute where they can be collected in a suitable container.
All operator controls are located in a console on the right hand side, including the thermostats and temperature gauges. Two interlocked, large sliding Perspex doors protect the operator from the moving parts of the machine. At the rear of the machine cabinet there are hinged doors for easy access for cleaning and maintenance purposes.
TECHNICAL SPECIFICATIONS:
Maximum capacity : 50 strokes/min with 10.0 mm draw-depth 35 strokes/min with 16.0 mm draw-depth
30 strokes/min with 18.5 mm draw-depth
Maximum forming area :110 x 150 mm
Maximum foil width :170 mm
Max. Ø PVC roll :400 mm
Max. Ø aluminium foil roll :240 mm
Power consumed :5.0 kw (average)
Total connected power :8.0 kw (peak consumption)
The machine requires an external supply of compressed air and a chiller unit to be connected – we can offer a suitable chiller unit at extra cost if required.

this extra information is standard for this model. Please always double-check the details during a visit

The Used Uhlmann UPS300 Blister Machine, manufactured in 2001, remains a robust and reliable solution for pharmaceutical blister packaging. While it's a pre-owned machine, its enduring performance and precision make it an attractive choice for pharmaceutical manufacturers seeking efficient and cost-effective blister packaging solutions.

The UPS300 excels in forming, filling, and sealing blister packs with exceptional accuracy and speed. It is versatile, capable of handling a wide range of pharmaceutical products, from tablets and capsules to medical devices. Its adaptability to different blister formats and product specifications makes it indispensable for pharmaceutical manufacturers with diverse packaging requirements.

One of its standout features is its advanced blistering technology. The machine incorporates precise dosing and sealing systems to ensure consistent and secure blister packs, a critical factor in maintaining product integrity and compliance with pharmaceutical regulations.

Choosing a used Uhlmann UPS300 Blister Machine from 2001 can be a cost-effective and practical decision for pharmaceutical companies. Proper refurbishment and maintenance can extend its operational life, making it a reliable and budget-friendly option for businesses seeking proven blister packaging solutions with a track record of performance.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Moulding length 110 mm
Moulding width 150 mm
Forming depth 10 mm
Max foil width 170 mm
Cycle/min 50
Total power requirement 8 kW
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status visible
Client type Reseller
Active since 2020
Offers online 301
Last activity March 28, 2024

Description

This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size.
The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment.
PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across the feeding area where the blisters are filled with product.
The filled blisters now pass into the sealing station where they are covered with aluminium top foil which is drawn from a reel mounted above. The heated top sealing plate on this station incorporates coding digits to allow a code to be embossed as the blisters are sealed. Air- operated grippers then pull the web forward through a short cooling plate before they are cut out from the web.
The web now passes into the guillotine cutting station, where the blisters are cut out and discharged down a chute where they can be collected in a suitable container.
All operator controls are located in a console on the right hand side, including the thermostats and temperature gauges. Two interlocked, large sliding Perspex doors protect the operator from the moving parts of the machine. At the rear of the machine cabinet there are hinged doors for easy access for cleaning and maintenance purposes.
TECHNICAL SPECIFICATIONS:
Maximum capacity : 50 strokes/min with 10.0 mm draw-depth 35 strokes/min with 16.0 mm draw-depth
30 strokes/min with 18.5 mm draw-depth
Maximum forming area :110 x 150 mm
Maximum foil width :170 mm
Max. Ø PVC roll :400 mm
Max. Ø aluminium foil roll :240 mm
Power consumed :5.0 kw (average)
Total connected power :8.0 kw (peak consumption)
The machine requires an external supply of compressed air and a chiller unit to be connected – we can offer a suitable chiller unit at extra cost if required.

this extra information is standard for this model. Please always double-check the details during a visit

The Used Uhlmann UPS300 Blister Machine, manufactured in 2001, remains a robust and reliable solution for pharmaceutical blister packaging. While it's a pre-owned machine, its enduring performance and precision make it an attractive choice for pharmaceutical manufacturers seeking efficient and cost-effective blister packaging solutions.

The UPS300 excels in forming, filling, and sealing blister packs with exceptional accuracy and speed. It is versatile, capable of handling a wide range of pharmaceutical products, from tablets and capsules to medical devices. Its adaptability to different blister formats and product specifications makes it indispensable for pharmaceutical manufacturers with diverse packaging requirements.

One of its standout features is its advanced blistering technology. The machine incorporates precise dosing and sealing systems to ensure consistent and secure blister packs, a critical factor in maintaining product integrity and compliance with pharmaceutical regulations.

Choosing a used Uhlmann UPS300 Blister Machine from 2001 can be a cost-effective and practical decision for pharmaceutical companies. Proper refurbishment and maintenance can extend its operational life, making it a reliable and budget-friendly option for businesses seeking proven blister packaging solutions with a track record of performance.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Moulding length 110 mm
Moulding width 150 mm
Forming depth 10 mm
Max foil width 170 mm
Cycle/min 50
Total power requirement 8 kW
-------------------
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2020
Offers online 301
Last activity March 28, 2024

Here is a selection of similar machines

Used Uhlmann UPS300 Blister machine