German branded water jet machine with two active heads

Model: HP19 / 37-S

Year of issue: 2007

Pressure 4000 bar

Working table width 3000x6000 mm

Fully working

Located in Almaty. You can come and see.



The CNC water jet cutting machine cuts any materials up to 300 mm thick (except for tempered glass) with an abrasive water jet, with a cutting width of about 1.1 mm

Benefits:

Highest quality of the resulting edges (often requiring no additional machining)

The edges of the material are not subject to thermal stress - no oxides, scale

Allows to cut bags consisting of several layers of different materials

Provides the ability to cut various composite materials, since no breaks are created in the material structure

Allows to process materials with wavy surfaces and complex contours

Free of dust and gases

Small cutting width of 1.1mm - minimum waste

Low tangential cutting force per part - the workpiece is not clamped

High cutting speed - up to 20,000 mm / min

Complete explosion and fire safety of the cutting process.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Metal length 3000 mm
Metal width 6000 mm
Nbr of heads 2
Source model
Type of CNC
-------------------
Length x width x height 6000.0 × 3000.0 × 1200.0
Weight 2000 kg
Worked hours 700 hours
Hours under power
State excellent
At local norms ---------
Status visible but unplugged
Client type User – small or medium company
Active since 2021
Offers online 1
Last activity May 27, 2022

Description

German branded water jet machine with two active heads

Model: HP19 / 37-S

Year of issue: 2007

Pressure 4000 bar

Working table width 3000x6000 mm

Fully working

Located in Almaty. You can come and see.



The CNC water jet cutting machine cuts any materials up to 300 mm thick (except for tempered glass) with an abrasive water jet, with a cutting width of about 1.1 mm

Benefits:

Highest quality of the resulting edges (often requiring no additional machining)

The edges of the material are not subject to thermal stress - no oxides, scale

Allows to cut bags consisting of several layers of different materials

Provides the ability to cut various composite materials, since no breaks are created in the material structure

Allows to process materials with wavy surfaces and complex contours

Free of dust and gases

Small cutting width of 1.1mm - minimum waste

Low tangential cutting force per part - the workpiece is not clamped

High cutting speed - up to 20,000 mm / min

Complete explosion and fire safety of the cutting process.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Metal length 3000 mm
Metal width 6000 mm
Nbr of heads 2
Source model
Type of CNC
-------------------
Length x width x height 6000.0 × 3000.0 × 1200.0
Weight 2000 kg
Worked hours 700 hours
Hours under power
State excellent
At local norms ---------
Status visible but unplugged

About this seller

Client type User – small or medium company
Active since 2021
Offers online 1
Last activity May 27, 2022

Here is a selection of similar machines

UHDE HP19/37-S Cutting machine - Plasma / gas