TSUGAMI M08SYE-II turning center built in 2018, on offer with IEMCA bar feeder. The feeder is completely equipped with all available channels and sleeves for all bar diameters, the full range of diameters can be machined.
Technical parameters of the TSUGAMI M08SYE II CNC lathe :
- CNC control: Fanuc 0iTD
- maximum turning diameter: fi 280 mm
- diameter of the bar fed through the spindle: fi 65 mm
- turning length: 380 mm
- number of axles: 6
- travel in X axis: 221 mm
- Z travel: 400 mm
- Y travel: 100 mm (+/- 50 mm)
- W travel (steer): 506 mm
- C1 / C2 travel: 360 degrees (0.001 degrees)
- rotational speed: 4500 rpm.
- spindle tip: JIS A2-6
- front bearing diameter: fi 100 mm
- spindle bore diameter: fi 73 mm
- motor power (30 min / constant): 11 / 7.5 kW
- rotational speed: 4500 rev / min.
- spindle tip: flat, fi 140 mm
- diameter of the front bearing: fi 80 mm
- spindle bore diameter: fi 59 mm
- motor power (30 min / constant): 7.5 / 5.5 kW
- head type : M-V12 NC, radial alignment
- number of tools: L / M: 12, each driven position
- tool shaft height: 25 mm
- shaft diameter: fi 40 mm
- tool drive rotational speed: 5000 rpm.
- motor power of driven tools: 3.7 kW
- torque of driven tools: 23.5 / 14 Nm (15 min / 30min)
- fast X axis travel: 24 m / min.
- fast travel in the Z axis: 27 m / min.
- fast travel on the A axis: 30 m / min.
- fast travel in the Y axis: 12 m / min.
Axis travel drives:
- in the X / Z axis: 1.8 kW
- in the Y axis: 1.8 kW
- in the A axis: 1.2 kW
- in the X / Y axes widely spaced slide guides with a large rectangular section; in the Z axis roller (roller) guides
- height: 1930 mm
- occupied area: 2470 x 1850 mm
- machine weight: 5900 kg
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase