This TRUMPF TrumaBend V85X press brake was manufactured in 2003 in Germany. It has a press force of 850 kN and a bending length of 2050 mm. Free upright clearance is 1750 mm. The standard equipment covers a sturdy machine frame, pressure beam with high bending strength and CNC backgauge with rack and pinion drive for X- and R-axis. As special features the machine has an increased installation height and stroke by 150 mm each to 535 mm, a 5-axes backgauge system, a hydraulic and hardened upper tool clamping, a hydraulic lower tool clamping, CNC crowning, a BendGuard safety device, a support front console and control cabinet climatization (for 2-, 4-axis backgauge systems). It comes with a bending tool package. License for software, ToPs 600 for bending, included. See attached original tech specs positions as PDF (German).

CNC: TRUMPF
Model: 2D graphic control
Interface: 10.4" color screen
Pressing force: 850 kN
Bending length: 2050 mm
Crowning available: Yes
Number of axis: 5
Tool Package
Software ToPs 600 for bending: License included

Free upright clearance 1750 mm
Installation height 385 mm
Electrical equipment for three-phase current 400 v / 50 hz
Modern block hydraulics
Cnc backgauge with rack and pinion drive, for x- and r-axis, danger-free movement of the stop fingers from the front
"modufix" upper tool holder system, manual
Bottom tool holder for ev dies, manual clamping, displacement programmable
Safety device
Installation height and stroke increased by 150 mm each to 535 mm
Back gauge system 5 axes
Hydraulic and hardened upper tool clamping
Hydraulic lower tool clamping
Cnc crowning
Bendguard safety device
Support console
Front control cabinet
Climatization (for 2-, 4-axis backgauge systems)
Preparation for acb®

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Strength 85 T
Folding length 2050 mm
Distance between uprights 1750 mm
CNC TRUMPF
Throat 410 mm
Vertical stroke 150 mm
Working speed 10 mm/s
Axis number 5
Motor power 13 kW
Hole Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Trumpf TrumaBend V85S
Client type Reseller
Active since 2019
Offers online 947
Last activity March 29, 2024

Description

This TRUMPF TrumaBend V85X press brake was manufactured in 2003 in Germany. It has a press force of 850 kN and a bending length of 2050 mm. Free upright clearance is 1750 mm. The standard equipment covers a sturdy machine frame, pressure beam with high bending strength and CNC backgauge with rack and pinion drive for X- and R-axis. As special features the machine has an increased installation height and stroke by 150 mm each to 535 mm, a 5-axes backgauge system, a hydraulic and hardened upper tool clamping, a hydraulic lower tool clamping, CNC crowning, a BendGuard safety device, a support front console and control cabinet climatization (for 2-, 4-axis backgauge systems). It comes with a bending tool package. License for software, ToPs 600 for bending, included. See attached original tech specs positions as PDF (German).

CNC: TRUMPF
Model: 2D graphic control
Interface: 10.4" color screen
Pressing force: 850 kN
Bending length: 2050 mm
Crowning available: Yes
Number of axis: 5
Tool Package
Software ToPs 600 for bending: License included

Free upright clearance 1750 mm
Installation height 385 mm
Electrical equipment for three-phase current 400 v / 50 hz
Modern block hydraulics
Cnc backgauge with rack and pinion drive, for x- and r-axis, danger-free movement of the stop fingers from the front
"modufix" upper tool holder system, manual
Bottom tool holder for ev dies, manual clamping, displacement programmable
Safety device
Installation height and stroke increased by 150 mm each to 535 mm
Back gauge system 5 axes
Hydraulic and hardened upper tool clamping
Hydraulic lower tool clamping
Cnc crowning
Bendguard safety device
Support console
Front control cabinet
Climatization (for 2-, 4-axis backgauge systems)
Preparation for acb®

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Strength 85 T
Folding length 2050 mm
Distance between uprights 1750 mm
CNC TRUMPF
Throat 410 mm
Vertical stroke 150 mm
Working speed 10 mm/s
Axis number 5
Motor power 13 kW
Hole Yes
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 947
Last activity March 29, 2024

Here is a selection of similar machines

TRUMPF TrumaBend V85X Press brake cnc/nc