TRUMPF TRULASER 3030 L49 3kW laser cutting machine Top seller

Fiber Laser TRUMPF TRULASER 3030 L49 3kW was built in 2015. The machine is equipped with an attachment for cutting tubes and profiles TRUMPF RotoLas , which enables machining of pipes on a flat cutter. To speed up and automate production, the laser is also equipped with the Trumpf LoadMaster sheet loading system. To control the laser was used Siemens SINUMERIK 840D sl CNC control.

Basic parameters:
- laser power: 3000 W
- X / Y axis working zone: 3000 x 1500 mm
- Z axis working zone, without RotoLas: 115 mm, with RotoLas: 205 mm

Maximum sheet thickness:
- O2 structural steel: 20 mm
- stainless steel N2: 15 mm
- aluminum N2: 15 mm
- copper: 6 mm
- brass: 6 mm
- titanium: 4 mm

Accuracy:
- maximum dispersion of the Ps position max: + -0.03 mm
- difference in the Pa position: + -0.05 mm
- the smallest, programmable path dimension: 0.001 mm

Control system:
- CNC control: TRUMPF CNC, based on SINUMERIK 840D sl
- main memory: PC 2 GB
- hard disk: 2 x 160 GB
- color monitor: TFT 17 "
- screen resolution: 1280 x 1024 px
- USB connector

Connection:
- network: 400 V / 50 Hz
- connection power: 35 kVA
- control voltage: 24 V
- protection needed: 3x 60A
- compressed air connection : 7-10 bar
- N2 nitrogen connection: 30 bar
- O2 oxygen connection: 20 bar
- machine dimensions (L x W x H): 9300 x 5100 x 2400 mm

Equipment:
- resonator: TruDisk 3001
- sheet feeder: Trumpf LoadMaster
- pipe and profile processing system: RotoLas
- CNC control: TRUMPF CNC, based on SINUMERIK 840D sl

Technical parameters of the RotoLas attachment for processing pipes and profiles:
- pipe length: 3000 mm
- waste length: 150 mm (minimum distance of the mounting bracket)
- pipe weight: 200kg
- support load: 150 kg
- maximum wall thickness for structural steel: 10 mm
- maximum wall thickness for stainless steel: 6 mm
- maximum wall thickness for aluminum: 5 mm
- rotational accuracy: 0.15 mm
- maximum difference in position: 0.03 mm
- maximum backlash: 0.01 mm
- drive: maintenance-free rotary axis Torque with four
- jaw chuck - rotation speed : 80 rpm
- housing length: 2550 mm

Characteristics of the TRUMPF TRULASER 3030 L49 laser:

Cutters from the Trulaser 3000 family are equipped with a crystal laser, thanks to which they provide great flexibility in the choice of material for processing and its thickness (thin sheet, thick, structural steel or non-ferrous metals, such as titanium, copper or brass).
The TruDisk laser can be used with excitation by diode pumping, as well as in pulse mode and CW mode. The advantages of the crystalline laser are very good beam shape due to the small opening angle with a small beam radius and high efficiency. Thanks to the built-in laser assembly in the machine body, the device is very compact and requires a small area to set up. Equipping the TruLaser 3030 with the automatic sheet loading system LoadMaster ensures the creation of a complete sheet metal working station.