4,440 €
Make an offer| ------------------- | |
| Length x width x height | 405.0 × 405.0 × 1000.0 |
| Weight | 240 kg |
| worked hours | |
| hours under power | |
| state | new |
| At local norms | --------- |
| status | packed |
| Last availability date | 10/11/2025 |
The Treatment of Surfaces LTD (London) RHC-140L is an industrial furnace designed for precise thermal processing. Manufactured in 2022, this model features an octagonal metal body equipped with a removable lid that lifts manually. The furnace chamber is lined with multi-layered white refractory bricks arranged in an octagonal pattern, providing effective insulation; the lining appears intact and free from visible cracks or damage. The chamber has a volume of 140 liters and is shaped as a hendecagon (11 faces) internally, constructed from insulation bricks to ensure optimal heat retention.
This furnace is powered by either a single-phase 230V supply or a three-phase 400V option available upon request, with power ratings between 10,000 and 30,000 watts depending on the required top temperature and heating time. It is capable of continuous operation for up to 36 hours, with a maximum working temperature available on request up to 1240°C (2264°F). The chamber's useful internal dimensions are approximately 600 mm in diameter and 650 mm in height.
Control is managed through a digital temperature controller capable of programming up to 32 time/temperature segments, allowing automated temperature ramps and soaks. The controller includes features such as digital over/low-temperature regulation, smoothing circuits for stability, and a power failure recovery system. Industrial-grade thermocouples and contactors are used for reliable operation.
The furnace is mounted on a heavy-duty movable stand with four caster wheels for ease of transport. The control box is affixed to the side of the furnace body and includes ventilation fans, cable connections, a digital display, and control knobs. Three red cables connect the control box to the furnace. The exterior metal surfaces are clean and free from visible dents or scratches, indicating good overall condition.
Additional specifications include a safety switch that disconnects power when the lid is open or improperly closed, calibrated temperature accuracy within ±1°C during soaking, and a 15-meter cable for flexible installation. The furnace weighs approximately 240 kg and measures 405 mm in length, 405 mm in width, and 1000 mm in height.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical specification:
– Brand name: Technical Supermarket (London);
– Model: RHC-140L;
– Single phase 230V +/-10% or 3-phase, 400V +/-10% on request depending on required top temperature;
– Power: 10000 – 30000 Watt on request depending on required top temperature and heating time;
– Continuously working time – 36 hours;
– Volume of chamber: 140 Cubic Liters;
– Shape of chamber – Hendecagon (11 faces);
– Powerful 3 or 6 heating elements around all walls;
– Maximum working temperature – on request up to 1240 C (2264 F);
– Estimated kiln dimensions without electrical box in MM (inch): diameter 810 (32″) x 1000 (40″) height;
– USEFUL chamber’s dimensions in MM (inch): 600 (24″) diameter x 650 (26″) height;
– Continuously working time on 1240 C: 20 minutes;
– 32 time/temperature segments 2-line programmable temperature controller that will allows you automatically reach, hold (soak) and change up to 32 temperature/time points or, on request, with harting (HAR-7D) socket for programmer you may already have;
– Industrial graded 64A contactor/s (no SSR);
– Type of lid: lifting up by hands;
– Safety switch for disconnecting power supply from heating elements when this lid is open or closed not properly;
– Digital over/low-temperature regulation secure system;
– Smoothing circuit (controller’s stability work) digital guard;
– Possibility to find present step and time on the step;
– PFRS (Power Fail Recovery System) if you will instantly lost electricity connection for short time;
– Material of chamber (inner): insulation bricks;
– Industrial graded thermocouple;
– Calibrated. Estimated accuracy of SOAKING temperature: +/- 1 C;
– If not installed yet, you may require a standard screw-driver for fixing and electrical box with temperature controller and a thermocouple to this kiln by few screws (supplied).
– Supplied on heavy duty movable stand;
– Weight – 240 Kg;
– Cable – 15 M;
– Will be deliver on a pallet;
– One year manufacture warranty and free technical (programming) support.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery manufacturer |
| Active since | 2024 |
| Offers online | 27 |
| Last activity | Feb. 15, 2026 |
Technical specification:
– Brand name: Technical Supermarket (London);
– Model: RHC-140L;
– Single phase 230V +/-10% or 3-phase, 400V +/-10% on request depending on required top temperature;
– Power: 10000 – 30000 Watt on request depending on required top temperature and heating time;
– Continuously working time – 36 hours;
– Volume of chamber: 140 Cubic Liters;
– Shape of chamber – Hendecagon (11 faces);
– Powerful 3 or 6 heating elements around all walls;
– Maximum working temperature – on request up to 1240 C (2264 F);
– Estimated kiln dimensions without electrical box in MM (inch): diameter 810 (32″) x 1000 (40″) height;
– USEFUL chamber’s dimensions in MM (inch): 600 (24″) diameter x 650 (26″) height;
– Continuously working time on 1240 C: 20 minutes;
– 32 time/temperature segments 2-line programmable temperature controller that will allows you automatically reach, hold (soak) and change up to 32 temperature/time points or, on request, with harting (HAR-7D) socket for programmer you may already have;
– Industrial graded 64A contactor/s (no SSR);
– Type of lid: lifting up by hands;
– Safety switch for disconnecting power supply from heating elements when this lid is open or closed not properly;
– Digital over/low-temperature regulation secure system;
– Smoothing circuit (controller’s stability work) digital guard;
– Possibility to find present step and time on the step;
– PFRS (Power Fail Recovery System) if you will instantly lost electricity connection for short time;
– Material of chamber (inner): insulation bricks;
– Industrial graded thermocouple;
– Calibrated. Estimated accuracy of SOAKING temperature: +/- 1 C;
– If not installed yet, you may require a standard screw-driver for fixing and electrical box with temperature controller and a thermocouple to this kiln by few screws (supplied).
– Supplied on heavy duty movable stand;
– Weight – 240 Kg;
– Cable – 15 M;
– Will be deliver on a pallet;
– One year manufacture warranty and free technical (programming) support.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| Length x width x height | 405.0 × 405.0 × 1000.0 |
| Weight | 240 kg |
| worked hours | |
| hours under power | |
| state | new |
| At local norms | --------- |
| status | packed |
| Last availability date | 10/11/2025 |
The Treatment of Surfaces LTD (London) RHC-140L is an industrial furnace designed for precise thermal processing. Manufactured in 2022, this model features an octagonal metal body equipped with a removable lid that lifts manually. The furnace chamber is lined with multi-layered white refractory bricks arranged in an octagonal pattern, providing effective insulation; the lining appears intact and free from visible cracks or damage. The chamber has a volume of 140 liters and is shaped as a hendecagon (11 faces) internally, constructed from insulation bricks to ensure optimal heat retention.
This furnace is powered by either a single-phase 230V supply or a three-phase 400V option available upon request, with power ratings between 10,000 and 30,000 watts depending on the required top temperature and heating time. It is capable of continuous operation for up to 36 hours, with a maximum working temperature available on request up to 1240°C (2264°F). The chamber's useful internal dimensions are approximately 600 mm in diameter and 650 mm in height.
Control is managed through a digital temperature controller capable of programming up to 32 time/temperature segments, allowing automated temperature ramps and soaks. The controller includes features such as digital over/low-temperature regulation, smoothing circuits for stability, and a power failure recovery system. Industrial-grade thermocouples and contactors are used for reliable operation.
The furnace is mounted on a heavy-duty movable stand with four caster wheels for ease of transport. The control box is affixed to the side of the furnace body and includes ventilation fans, cable connections, a digital display, and control knobs. Three red cables connect the control box to the furnace. The exterior metal surfaces are clean and free from visible dents or scratches, indicating good overall condition.
Additional specifications include a safety switch that disconnects power when the lid is open or improperly closed, calibrated temperature accuracy within ±1°C during soaking, and a 15-meter cable for flexible installation. The furnace weighs approximately 240 kg and measures 405 mm in length, 405 mm in width, and 1000 mm in height.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2024 |
| Offers online | 27 |
| Last activity | Feb. 15, 2026 |
Пещ Treatment of Surfaces LTD (London) RHC-140L
Pec Treatment of Surfaces LTD (London) RHC-140L
Treatment of Surfaces LTD (London) RHC-140L Ovn
Treatment of Surfaces LTD (London) RHC-140L Schmelzofen
Κάμινος Treatment of Surfaces LTD (London) RHC-140L
1240C (2264F) HENDECAGON Top-Loaded Programmable Kiln – 140 L
Horno por inducción Treatment of Surfaces LTD (London) RHC-140L
Four Treatment of Surfaces LTD (London) RHC-140L
Peć Treatment of Surfaces LTD (London) RHC-140L
Treatment of Surfaces LTD (London) RHC-140L Kemence
Fornace Treatment of Surfaces LTD (London) RHC-140L
Krosnis Treatment of Surfaces LTD (London) RHC-140L
Treatment of Surfaces LTD (London) RHC-140L Oven
Piec Treatment of Surfaces LTD (London) RHC-140L
Forno Treatment of Surfaces LTD (London) RHC-140L
Cuptor Treatment of Surfaces LTD (London) RHC-140L
Treatment of Surfaces LTD (London) RHC-140L Печь
Peć Treatment of Surfaces LTD (London) RHC-140L
Treatment of Surfaces LTD (London) RHC-140L Ugn
Fırın Treatment of Surfaces LTD (London) RHC-140L
EN
- Languages
English (GB)