3,750 €
Make an offer| ------------------- | |
| Length x width x height | 1200.0 × 500.0 × 400.0 |
| Weight | 70 kg |
| worked hours | |
| hours under power | |
| state | new |
| At local norms | --------- |
| status | packed |
| Last availability date | 07/08/2024 |
This industrial furnace, model RF-1300P, is manufactured by Treatment of Surfaces LTD based in London and was produced in 2022. It features a rectangular metal design with a hinged lid that opens upwards, supported by two metal arms to hold the lid securely open during use. The furnace is supported by a sturdy metal frame with legs, ensuring stability during operation.
The furnace's outer dimensions measure 1200 mm in length, 500 mm in width, and 400 mm in height, with a weight of approximately 70 kg. Inside, it has an insulated interior lining designed to withstand high temperatures safely. The unit includes a control box attached to the side, equipped with ventilation holes and a switch for operation. A thick electrical cable is provided for power connection.
This commercial-grade kiln operates on an input voltage range of 110-230V (plug not supplied) and can be configured for single or three-phase power on request. It has a power rating of 5300 Watts and can reach a maximum heating temperature of 1300°C (2372°F). Heating to 1300°C takes approximately 180 minutes, with maximum soaking times of 10 minutes at 1300°C and up to 12 hours at temperatures below 1000°C.
The kiln features a programmer capable of managing 32 temperature/time segments or points, with a minimal time setting of 1 minute and temperature settings starting at 1°C (with 0.1°C precision available on request). It uses a contactor regulation type (no SSR) and includes a K-type industrial thermocouple with a 3.2 mm wire for accurate temperature measurement. The unit also comes with a 10-meter mains cable and two 14-mm ventilation holes on the door, fitted with stainless steel shutters.
Additional functionalities include remote control for opening and closing the door from up to 50 meters away, the ability to cancel or switch programs mid-operation, and the option to hold the furnace at a set temperature indefinitely. The temperature programmer can also function as a simple P.I.D. controller. The manufacturer offers free programming of custom temperature/time settings and free re-setting of the microprocessor for new projects during the first year.
This kiln complies with CE, ACUK, and CFF standards, meeting all relevant European and US electrical regulations. It contains no asbestos, and MSDS for the insulation material is available upon request. The furnace is delivered with a heavy-duty metal stand on a pallet for ease of transport and stability.
Overall, this RF-1300P furnace is a robust, versatile industrial kiln suitable for high-temperature applications, offering precise control and safety features consistent with commercial standards.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical Specification:
– Brand: Technical Supermarket (London, UK).
– Input: 110-230V on request. Supplied with no plug.
– Model: RF-1300P.
– Grade: Commercial.
– Power: 5300 Watt.
– Single or Three phase on request.
– Maximum heating temperature:1300oC (2372oF).
– Heating time to 1300 C = 180 minutes.
– Maximal soaking time: on 1300 C = 10 minutes. On temperatures below 1000 C = 12 hours.
– Calibrated class “C”.
– Estimated useful chamber’s dimensions: 40″ x 12″x 8″H (1000 mm x 300 mm x 200 mm(H)).
– Kiln’s outer dimensions: 1200 (L) x 500 x 400 mm;
– Minimal time setting point = 1 Minute.
– Minimal Temperature setting point = 1o Celsius (0.1C is available on request).
– Programmer with 32 temperature/time segments/points.
– CE/ACUK/CFF approved: meets all Europe/US electrical standards.
– Regulation type – contactor (no SSR).
– NO ASBESTOS. MSDS on insulation material is available on request.
– Two of 14-mm ventilation holes on the door with stainless steel shutters.
– Will be deliver to you with a heavy duty metal stand on a pallet.
– Has remote control for opening and close the door from around 50 metres.
– Position of three heating elements – TOP.
– K-type industrial thermocouple 3.2 mm wire.
– 10-meter mains cable.
– Possibility to cancel all programs at one click (clean up the microprocessor???s memory for a new programs).
– Possibility to jump from one program to an other program or inside one program between point/segment.
– Possibility to abort any program at any time on any temperature point.
– Possibility to hold work on a present temperature as long as you need.
– Possibility to use this temperature programmer as a simple P.I.D. controller.
– Need your own program? Send to us the required temperatures/time setting and we will programming this microprocessor for you free of charge and send it to you ready-to-use kiln.
– IMPORTANT: Free-for-first-year re-setting of the microprocessor for your new projects (new programs) – on-line or via email: use this service as often as you like without any restriction.
– One years full manufacturer warranty.
– All after-warranty services worldwide include parts-by-post.
– Made in UK (London)
– Weight – 70 kg (90 kg on pallet).
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery manufacturer |
| Active since | 2024 |
| Offers online | 27 |
| Last activity | Feb. 15, 2026 |
Technical Specification:
– Brand: Technical Supermarket (London, UK).
– Input: 110-230V on request. Supplied with no plug.
– Model: RF-1300P.
– Grade: Commercial.
– Power: 5300 Watt.
– Single or Three phase on request.
– Maximum heating temperature:1300oC (2372oF).
– Heating time to 1300 C = 180 minutes.
– Maximal soaking time: on 1300 C = 10 minutes. On temperatures below 1000 C = 12 hours.
– Calibrated class “C”.
– Estimated useful chamber’s dimensions: 40″ x 12″x 8″H (1000 mm x 300 mm x 200 mm(H)).
– Kiln’s outer dimensions: 1200 (L) x 500 x 400 mm;
– Minimal time setting point = 1 Minute.
– Minimal Temperature setting point = 1o Celsius (0.1C is available on request).
– Programmer with 32 temperature/time segments/points.
– CE/ACUK/CFF approved: meets all Europe/US electrical standards.
– Regulation type – contactor (no SSR).
– NO ASBESTOS. MSDS on insulation material is available on request.
– Two of 14-mm ventilation holes on the door with stainless steel shutters.
– Will be deliver to you with a heavy duty metal stand on a pallet.
– Has remote control for opening and close the door from around 50 metres.
– Position of three heating elements – TOP.
– K-type industrial thermocouple 3.2 mm wire.
– 10-meter mains cable.
– Possibility to cancel all programs at one click (clean up the microprocessor???s memory for a new programs).
– Possibility to jump from one program to an other program or inside one program between point/segment.
– Possibility to abort any program at any time on any temperature point.
– Possibility to hold work on a present temperature as long as you need.
– Possibility to use this temperature programmer as a simple P.I.D. controller.
– Need your own program? Send to us the required temperatures/time setting and we will programming this microprocessor for you free of charge and send it to you ready-to-use kiln.
– IMPORTANT: Free-for-first-year re-setting of the microprocessor for your new projects (new programs) – on-line or via email: use this service as often as you like without any restriction.
– One years full manufacturer warranty.
– All after-warranty services worldwide include parts-by-post.
– Made in UK (London)
– Weight – 70 kg (90 kg on pallet).
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| Length x width x height | 1200.0 × 500.0 × 400.0 |
| Weight | 70 kg |
| worked hours | |
| hours under power | |
| state | new |
| At local norms | --------- |
| status | packed |
| Last availability date | 07/08/2024 |
This industrial furnace, model RF-1300P, is manufactured by Treatment of Surfaces LTD based in London and was produced in 2022. It features a rectangular metal design with a hinged lid that opens upwards, supported by two metal arms to hold the lid securely open during use. The furnace is supported by a sturdy metal frame with legs, ensuring stability during operation.
The furnace's outer dimensions measure 1200 mm in length, 500 mm in width, and 400 mm in height, with a weight of approximately 70 kg. Inside, it has an insulated interior lining designed to withstand high temperatures safely. The unit includes a control box attached to the side, equipped with ventilation holes and a switch for operation. A thick electrical cable is provided for power connection.
This commercial-grade kiln operates on an input voltage range of 110-230V (plug not supplied) and can be configured for single or three-phase power on request. It has a power rating of 5300 Watts and can reach a maximum heating temperature of 1300°C (2372°F). Heating to 1300°C takes approximately 180 minutes, with maximum soaking times of 10 minutes at 1300°C and up to 12 hours at temperatures below 1000°C.
The kiln features a programmer capable of managing 32 temperature/time segments or points, with a minimal time setting of 1 minute and temperature settings starting at 1°C (with 0.1°C precision available on request). It uses a contactor regulation type (no SSR) and includes a K-type industrial thermocouple with a 3.2 mm wire for accurate temperature measurement. The unit also comes with a 10-meter mains cable and two 14-mm ventilation holes on the door, fitted with stainless steel shutters.
Additional functionalities include remote control for opening and closing the door from up to 50 meters away, the ability to cancel or switch programs mid-operation, and the option to hold the furnace at a set temperature indefinitely. The temperature programmer can also function as a simple P.I.D. controller. The manufacturer offers free programming of custom temperature/time settings and free re-setting of the microprocessor for new projects during the first year.
This kiln complies with CE, ACUK, and CFF standards, meeting all relevant European and US electrical regulations. It contains no asbestos, and MSDS for the insulation material is available upon request. The furnace is delivered with a heavy-duty metal stand on a pallet for ease of transport and stability.
Overall, this RF-1300P furnace is a robust, versatile industrial kiln suitable for high-temperature applications, offering precise control and safety features consistent with commercial standards.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2024 |
| Offers online | 27 |
| Last activity | Feb. 15, 2026 |
Пещ Treatment of Surfaces LTD (London) RF-1300P
Pec Treatment of Surfaces LTD (London) RF-1300P
Treatment of Surfaces LTD (London) RF-1300P Ovn
Treatment of Surfaces LTD (London) RF-1300P Schmelzofen
Κάμινος Treatment of Surfaces LTD (London) RF-1300P
1300 C (2372 F) Door Remote Control Kiln With 40″ Wide Inner
Horno por inducción Treatment of Surfaces LTD (London) RF-1300P
Four Treatment of Surfaces LTD (London) RF-1300P
Peć Treatment of Surfaces LTD (London) RF-1300P
Treatment of Surfaces LTD (London) RF-1300P Kemence
Fornace Treatment of Surfaces LTD (London) RF-1300P
Krosnis Treatment of Surfaces LTD (London) RF-1300P
Treatment of Surfaces LTD (London) RF-1300P Oven
Piec Treatment of Surfaces LTD (London) RF-1300P
Forno Treatment of Surfaces LTD (London) RF-1300P
Cuptor Treatment of Surfaces LTD (London) RF-1300P
Treatment of Surfaces LTD (London) RF-1300P Печь
Peć Treatment of Surfaces LTD (London) RF-1300P
Treatment of Surfaces LTD (London) RF-1300P Ugn
Fırın Treatment of Surfaces LTD (London) RF-1300P
EN
- Languages
English (GB)