2,600 €
Make an offer| ------------------- | |
| Length x width x height | 750.0 × 700.0 × 700.0 |
| Weight | 55 kg |
| worked hours | |
| hours under power | |
| state | new |
| At local norms | --------- |
| status | packed |
| Last availability date | 07/08/2024 |
This industrial kiln, model R-500-950, is manufactured by Treatment of Surfaces LTD (London) in 2022. It features a robust metal casing with ventilation slots on the sides and rear, designed to ensure proper airflow and cooling during operation. The exterior metal casing is in good condition, showing only minor surface marks and slight wear without any major damage.
The kiln measures 750 mm in length, 700 mm in width, and 700 mm in height, with a weight of 55 kg. It operates on a single-phase 230 Vac power supply (±10%), with a power rating of 4000 Watts. The unit is supplied without a plug and should be connected separately to a 16A or 32A circuit breaker in your workshop. A 5-meter power cable is included.
The furnace chamber is lined with insulation and contains heating coils, visible when the door is open. The chamber dimensions are approximately 550 mm high, 500 mm wide, and 580 mm long. The interior lining appears clean and intact. The door is equipped with insulation, two special toggle clamps, and a latch mechanism to ensure secure closure. A safety switch mechanism disconnects the heating elements if the door is open or not properly closed.
The kiln is capable of reaching a maximum working temperature of 950°C (1742°F), with an estimated heating time to reach this temperature of 90 minutes when empty. It can maintain continuous operation at 950°C for up to 8 hours. The temperature controller is programmable with up to 32 time/temperature segments, allowing precise control to reach, hold (soak), and change temperature/time points automatically.
Additional features include a digital over/low-temperature regulation system, a smoothing circuit for controller stability, and an industrial-grade K-type thermocouple mounted on the right wall of the chamber. The soaking temperature accuracy is calibrated to approximately ±1°C.
The kiln is equipped with a control panel mounted on the side, featuring an analog meter and a digital display for monitoring. Cooling fans are integrated to assist with temperature regulation. For installation, the kiln must be positioned on a fire-resistant stand; heavy metal stands and ceramic shelves compatible with this model are available separately.
Overall, this kiln offers precise temperature control, safety features, and a sturdy build suitable for various industrial surface treatment applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Technical specification:
– Brand name: Technical Supermarket (London);
– Model: R-500-950;
– Single phase, 230 Vac +/-10%. Supplied without plug – should be connected separately to any 16A or 32A circuit breaker at your workshop;
– 4000 Watt;
– Maximum working temperature – 950 C (1742 F);
– Kiln dimensions in MM (inch): H700 x W700 x L750 (28″ x 28″ x 30″);
– New empty kiln estimated heating time to 950 C – 90 minutes;
– Chamber dimensions in MM (inch): H550 x W500 x L580 (22″ x 20″ x 23″ and 27″ Diagonal)
– Continuously working time on 950 C (1742 F): 8 hours;
– 32 time/temperature segments 2-line programmable temperature controller that will allows you automatically reach, hold (soak) and change up to 32 temperature/time points;
– Safety switch mechanism for disconnecting heating elements from a power supply if door is open or closed not properly;
– Two heating elements on the left and right wall;
– Two special toggle clamps for closing kiln’s door properly;
– Digital over/low-temperature regulation secure system;
– Smoothing circuit (controller’s stability work) digital guard;
– Industrial graded K-thermocouple on right wall of the kiln;
– Calibrated. Estimated accuracy of SOAKING temperature: +/- 1 C;
– You will require a standard screw-driver to fix electrical box with temperature controller, thermocouple and safety switch’s mechanism of this kiln by few screws (supplied).
– This kiln must be positioned on a fire-resist stand. Heavy metal stand and/or ceramic shelves for this kiln available below;
– Weight – 55 Kg (70 kg with pallet);
– Cable – 5 M.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery manufacturer |
| Active since | 2024 |
| Offers online | 27 |
| Last activity | Feb. 15, 2026 |
Technical specification:
– Brand name: Technical Supermarket (London);
– Model: R-500-950;
– Single phase, 230 Vac +/-10%. Supplied without plug – should be connected separately to any 16A or 32A circuit breaker at your workshop;
– 4000 Watt;
– Maximum working temperature – 950 C (1742 F);
– Kiln dimensions in MM (inch): H700 x W700 x L750 (28″ x 28″ x 30″);
– New empty kiln estimated heating time to 950 C – 90 minutes;
– Chamber dimensions in MM (inch): H550 x W500 x L580 (22″ x 20″ x 23″ and 27″ Diagonal)
– Continuously working time on 950 C (1742 F): 8 hours;
– 32 time/temperature segments 2-line programmable temperature controller that will allows you automatically reach, hold (soak) and change up to 32 temperature/time points;
– Safety switch mechanism for disconnecting heating elements from a power supply if door is open or closed not properly;
– Two heating elements on the left and right wall;
– Two special toggle clamps for closing kiln’s door properly;
– Digital over/low-temperature regulation secure system;
– Smoothing circuit (controller’s stability work) digital guard;
– Industrial graded K-thermocouple on right wall of the kiln;
– Calibrated. Estimated accuracy of SOAKING temperature: +/- 1 C;
– You will require a standard screw-driver to fix electrical box with temperature controller, thermocouple and safety switch’s mechanism of this kiln by few screws (supplied).
– This kiln must be positioned on a fire-resist stand. Heavy metal stand and/or ceramic shelves for this kiln available below;
– Weight – 55 Kg (70 kg with pallet);
– Cable – 5 M.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| Length x width x height | 750.0 × 700.0 × 700.0 |
| Weight | 55 kg |
| worked hours | |
| hours under power | |
| state | new |
| At local norms | --------- |
| status | packed |
| Last availability date | 07/08/2024 |
This industrial kiln, model R-500-950, is manufactured by Treatment of Surfaces LTD (London) in 2022. It features a robust metal casing with ventilation slots on the sides and rear, designed to ensure proper airflow and cooling during operation. The exterior metal casing is in good condition, showing only minor surface marks and slight wear without any major damage.
The kiln measures 750 mm in length, 700 mm in width, and 700 mm in height, with a weight of 55 kg. It operates on a single-phase 230 Vac power supply (±10%), with a power rating of 4000 Watts. The unit is supplied without a plug and should be connected separately to a 16A or 32A circuit breaker in your workshop. A 5-meter power cable is included.
The furnace chamber is lined with insulation and contains heating coils, visible when the door is open. The chamber dimensions are approximately 550 mm high, 500 mm wide, and 580 mm long. The interior lining appears clean and intact. The door is equipped with insulation, two special toggle clamps, and a latch mechanism to ensure secure closure. A safety switch mechanism disconnects the heating elements if the door is open or not properly closed.
The kiln is capable of reaching a maximum working temperature of 950°C (1742°F), with an estimated heating time to reach this temperature of 90 minutes when empty. It can maintain continuous operation at 950°C for up to 8 hours. The temperature controller is programmable with up to 32 time/temperature segments, allowing precise control to reach, hold (soak), and change temperature/time points automatically.
Additional features include a digital over/low-temperature regulation system, a smoothing circuit for controller stability, and an industrial-grade K-type thermocouple mounted on the right wall of the chamber. The soaking temperature accuracy is calibrated to approximately ±1°C.
The kiln is equipped with a control panel mounted on the side, featuring an analog meter and a digital display for monitoring. Cooling fans are integrated to assist with temperature regulation. For installation, the kiln must be positioned on a fire-resistant stand; heavy metal stands and ceramic shelves compatible with this model are available separately.
Overall, this kiln offers precise temperature control, safety features, and a sturdy build suitable for various industrial surface treatment applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2024 |
| Offers online | 27 |
| Last activity | Feb. 15, 2026 |
Пещ Treatment of Surfaces LTD (London) R-500-950
Pec Treatment of Surfaces LTD (London) R-500-950
Treatment of Surfaces LTD (London) R-500-950 Ovn
Treatment of Surfaces LTD (London) R-500-950 Schmelzofen
Κάμινος Treatment of Surfaces LTD (London) R-500-950
950 C (1742 F) Programmable Kiln With Large, 160 C/L Chamber
Horno por inducción Treatment of Surfaces LTD (London) R-500-950
Four Treatment of Surfaces LTD (London) R-500-950
Peć Treatment of Surfaces LTD (London) R-500-950
Treatment of Surfaces LTD (London) R-500-950 Kemence
Fornace Treatment of Surfaces LTD (London) R-500-950
Krosnis Treatment of Surfaces LTD (London) R-500-950
Treatment of Surfaces LTD (London) R-500-950 Oven
Piec Treatment of Surfaces LTD (London) R-500-950
Forno Treatment of Surfaces LTD (London) R-500-950
Cuptor Treatment of Surfaces LTD (London) R-500-950
Treatment of Surfaces LTD (London) R-500-950 Печь
Peć Treatment of Surfaces LTD (London) R-500-950
Treatment of Surfaces LTD (London) R-500-950 Ugn
Fırın Treatment of Surfaces LTD (London) R-500-950
EN
- Languages
English (GB)