Price on request
Make an offer| Max load on table | 160000 kg |
| Type of CNC | FANUC 2000 C |
| Spindle taper | ISO 50 |
| Max. spindle speed | 630 rpm |
| ------------------- | |
| Weight | 225000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | dismantled |
| Last availability date | 15/12/2025 |
This Toshiba (Shibaura) TD-60/85 is a numerically controlled, cross-rail elevating double column vertical boring and turning mill, manufactured in 1978. It features a robust design with two vertical columns supporting an overhead bridge structure, providing stability and precision for heavy-duty machining tasks. The machine is equipped with a large circular rotary table with a diameter of 6,000 mm, capable of handling a maximum load of 160,000 kg at speeds below 10 rpm, making it suitable for machining very large and heavy workpieces.
The machine includes two rail heads mounted on the cross rail: the right head is dedicated exclusively to turning operations, while the left head performs boring and milling tasks. Both heads can operate sequentially without changing the machine setup, enhancing versatility and efficiency. The right turning head can handle heavy-duty operations, and both heads offer vertical travels of 2,300 mm (right) and 2,000 mm (left), with a maximum swivel angle of ±30 degrees, allowing for a wide range of machining angles.
The milling spindle has a diameter of 290 mm at the nose, with an ISO 50 taper, and operates at speeds ranging from 6.3 to 630 rpm across three steps. The table speed varies from 0.315 to 31.5 rpm, with a milling speed range of 0.0006 to 0.2 rpm. Rail head feed speeds range from 0.2 to 800 mm/min, with rapid speeds up to 2,400 mm/min. The cross rail elevates at 300 mm/min.
The machine’s cross rail is guided by slideways on the columns and clamped electro-hydraulically for precise positioning. A hydrostatic lubrication system supports the rail head guideways and table, ensuring smooth operation. The machine weighs approximately 225,000 kg.
This unit includes two operator control panels—one mounted on the side and one hanging from the overhead bridge—allowing control from multiple positions. The machine is installed indoors in a well-lit industrial workshop and appears clean and well-maintained, with minor paint wear but no visible major damage or rust. Safety features include stair access and railings on the bridge platform, with a visible weight limit sign of 300 kg on the railing.
Overall, this Toshiba TD-60/85 offers a combination of heavy-duty turning, boring, and milling capabilities with a large rotary table, making it suitable for complex and versatile machining of large parts.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This machine is a numerically controlled and cross rail elevating double column type vertical boring and turning mill. Is a machine with two rail heads.
One, on the right side is turning head and the other, on the left side is a milling head. The right head is utilized exclusively for turning work and can withstand heavy duty operation, and left performs boring and milling work.
After the turning is completed, both heads can be performed without changing the machine set-up. These features, coupled with table indexing and milling feed, assure versatility machining capabilities.
The cross rail is guided by the slideways of the two columns. Electro-hydraulic clamping clamping devices assure clamping of the cross rail at the desired position.
Highly accurate horizontal straightness is guaranteed by the simple and stabilized method of utilizing the compensation beam inside the cross beam.
All control operations for running the machine can be performed either on the platform of the cross rail or on the floor.
The hydrostatic lubrication system is employed for the rail head guideways and table.
Table diameter 6 000 mm
Max. turning diameter 8 500 mm
Max. distance between table top and tool holder of rail heads 3 500 mm
Vertical travel of right ram 2 300 mm
Vertical travel of left ram 2 000 mm
Max. swivel angle of right and left ram ±30 deg.
Diameter of milling-spindle nose 290 mm
Taper of milling spindle ISO 50
Max. load on table (less than 10 rpm) 160 000 Kg
Section of right ram 320x320 mm
Section of left ram 450x450 mm
Milling spindle speed (on 3 steps) 6.3-630 rpm
Table speed (on 3 steps) 0.315-31.5 rpm
Table milling speed 0.0006-0.2 rpm
Feed speed of rail heads 0.2-800 mm/min
Rapid speed of rail heads 2 400 mm/min
Cross rail elevating speed 300 mm/min
Weight of machine 225 000 Kg
160 TONE CAPA
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What is the condition of this TOSHIBA TD-60/85?
This TOSHIBA TD-60/85 Portal milling machine is used and in good condition.
Is this TOSHIBA TD-60/85 currently dismantled?
This TOSHIBA TD-60/85 Portal milling machine has already been dismantled and is in storage.
Does this TOSHIBA TD-60/85 have any defects?
There are no defects in the TOSHIBA TD-60/85 Portal milling machine.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Feb. 24, 2026 |
This machine is a numerically controlled and cross rail elevating double column type vertical boring and turning mill. Is a machine with two rail heads.
One, on the right side is turning head and the other, on the left side is a milling head. The right head is utilized exclusively for turning work and can withstand heavy duty operation, and left performs boring and milling work.
After the turning is completed, both heads can be performed without changing the machine set-up. These features, coupled with table indexing and milling feed, assure versatility machining capabilities.
The cross rail is guided by the slideways of the two columns. Electro-hydraulic clamping clamping devices assure clamping of the cross rail at the desired position.
Highly accurate horizontal straightness is guaranteed by the simple and stabilized method of utilizing the compensation beam inside the cross beam.
All control operations for running the machine can be performed either on the platform of the cross rail or on the floor.
The hydrostatic lubrication system is employed for the rail head guideways and table.
Table diameter 6 000 mm
Max. turning diameter 8 500 mm
Max. distance between table top and tool holder of rail heads 3 500 mm
Vertical travel of right ram 2 300 mm
Vertical travel of left ram 2 000 mm
Max. swivel angle of right and left ram ±30 deg.
Diameter of milling-spindle nose 290 mm
Taper of milling spindle ISO 50
Max. load on table (less than 10 rpm) 160 000 Kg
Section of right ram 320x320 mm
Section of left ram 450x450 mm
Milling spindle speed (on 3 steps) 6.3-630 rpm
Table speed (on 3 steps) 0.315-31.5 rpm
Table milling speed 0.0006-0.2 rpm
Feed speed of rail heads 0.2-800 mm/min
Rapid speed of rail heads 2 400 mm/min
Cross rail elevating speed 300 mm/min
Weight of machine 225 000 Kg
160 TONE CAPA
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
What is the condition of this TOSHIBA TD-60/85?
This TOSHIBA TD-60/85 Portal milling machine is used and in good condition.
Is this TOSHIBA TD-60/85 currently dismantled?
This TOSHIBA TD-60/85 Portal milling machine has already been dismantled and is in storage.
Does this TOSHIBA TD-60/85 have any defects?
There are no defects in the TOSHIBA TD-60/85 Portal milling machine.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Max load on table | 160000 kg |
| Type of CNC | FANUC 2000 C |
| Spindle taper | ISO 50 |
| Max. spindle speed | 630 rpm |
| ------------------- | |
| Weight | 225000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | dismantled |
| Last availability date | 15/12/2025 |
This Toshiba (Shibaura) TD-60/85 is a numerically controlled, cross-rail elevating double column vertical boring and turning mill, manufactured in 1978. It features a robust design with two vertical columns supporting an overhead bridge structure, providing stability and precision for heavy-duty machining tasks. The machine is equipped with a large circular rotary table with a diameter of 6,000 mm, capable of handling a maximum load of 160,000 kg at speeds below 10 rpm, making it suitable for machining very large and heavy workpieces.
The machine includes two rail heads mounted on the cross rail: the right head is dedicated exclusively to turning operations, while the left head performs boring and milling tasks. Both heads can operate sequentially without changing the machine setup, enhancing versatility and efficiency. The right turning head can handle heavy-duty operations, and both heads offer vertical travels of 2,300 mm (right) and 2,000 mm (left), with a maximum swivel angle of ±30 degrees, allowing for a wide range of machining angles.
The milling spindle has a diameter of 290 mm at the nose, with an ISO 50 taper, and operates at speeds ranging from 6.3 to 630 rpm across three steps. The table speed varies from 0.315 to 31.5 rpm, with a milling speed range of 0.0006 to 0.2 rpm. Rail head feed speeds range from 0.2 to 800 mm/min, with rapid speeds up to 2,400 mm/min. The cross rail elevates at 300 mm/min.
The machine’s cross rail is guided by slideways on the columns and clamped electro-hydraulically for precise positioning. A hydrostatic lubrication system supports the rail head guideways and table, ensuring smooth operation. The machine weighs approximately 225,000 kg.
This unit includes two operator control panels—one mounted on the side and one hanging from the overhead bridge—allowing control from multiple positions. The machine is installed indoors in a well-lit industrial workshop and appears clean and well-maintained, with minor paint wear but no visible major damage or rust. Safety features include stair access and railings on the bridge platform, with a visible weight limit sign of 300 kg on the railing.
Overall, this Toshiba TD-60/85 offers a combination of heavy-duty turning, boring, and milling capabilities with a large rotary table, making it suitable for complex and versatile machining of large parts.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2023 |
| Offers online | 2 |
| Last activity | Feb. 24, 2026 |
TOSHIBA (sHIBAURA) TD-60/85
Portálová frézka TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85 Portalfräsmaschine
TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA TD-60/85 Portal milling machine
Fresadora de pórtico TOSHIBA (sHIBAURA) TD-60/85
Fraiseuse à portique TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85
Fresatrice a portale TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85
Frezarka bramowa TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85 Портальный фрезерный станок
TOSHIBA (sHIBAURA) TD-60/85
TOSHIBA (sHIBAURA) TD-60/85
Portal freze tezgahı TOSHIBA (sHIBAURA) TD-60/85
EN
- Languages
English (GB)