Price on request
Make an offer| Max. Ø | 20 mm |
| Max. length | 200 mm |
| Type of CNC | |
| Type of main spindle | |
| Type of back spindle | |
| Spindle speed | 10000 rpm |
| ------------------- | |
| Length x width x height | 2270.0 × 1650.0 × 2500.0 |
| Weight | 3500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 13/05/2026 |
Offer Title: Automatic lathe with movable tailstock TORNOS DECO20A
Manufacturer: TORNOS
Model: DECO20A
Technical Condition: As-is, where-is
Technical Specifications:
Category: Lathe Type
Type: Sliding headstock
SLIDING HEADSTOCK (Z1 AXIS) + C1
Tool Capacity: Ø 20 mm (Ø 0.79 in)
Tool Diameter: 200 mm (7.87 in)
Programmable Rotation Speed: 100 - 10,000 rpm
Max Number of Cross Holes, Cross Cutter: 0.1°
Motor Power: 5.5 kW (7.5 kW)
MAIN SPINDLE (X1/Y1) (X2/Y2)
Number of Tools: 2 x 5
Tool Section: 16 x 16 mm (0.63 x 0.63 in)
Max Number of Cross Holes, Cross Cutter: 4 + 2
Programmable Rotation Speed: 100 - 8000 rpm
Motor Power: 1.5 kW (2.2 kW)
COMBINED TOOLING (X3/Y3)
Max Number of Tools: 4
Spindle Speed: 100 - 6000 rpm
Max Motor Power: 1.5 kW (2.2 kW)
COUNTERSPINDLE (X4 / Y4 / Z4) + C4
Max Clamping Diameter: 20 mm (0.79 in)
Max Turnable Length: 200 mm (7.87 in)
Speed: 100 - 10,000 rpm
C-axis Resolution: 0.1°
Sub-spindle Power: 1.1 kW (3.7 kW)
Max Number of Operations: 7
Number of Tools: 7
Motorized Tool Speed: 100 - 8,000 rpm
Power of Motorized Tools: 1.5 kW (2.2 kW)
PARALLEL CNC
Number of Simultaneous Axes: All axes
Number of Interpolated Axes: All axes
TWO VERSIONS
8 axes with sub-spindle
10 axes with front attachment and sub-spindle
Compliance: Complies with European Safety Standards CE/CEM
General Specifications:
Length: 2270 mm (89.37 in)
Width: 1650 mm (64.96 in)
Height: 2500 mm (98.43 in)
Height at Spindle Center: 1100 mm (43.31 in)
Weight: 3500 kg
Coolant Capacity: 200 liters
Adjustable Pump Flow Rate: 9 - 59 liters/min
Chip Tray Capacity: 130 liters
Installed Power: 14 kVA
Pneumatic Unit Pressure: 6 bar (87 PSI)
Operating Ambient Temperature: 5 - 35 °C
Paint Finish: Gray RAL 7035 and Blue RAL 5013
Numerical Control and Programming Software:
Control Type: PNC - DECO
Programming Software: TB - DECO
Axis Encoders: Absolute serial
Motor Type (Axes and Spindles): AC (Alternating Current) motors
Maximum Number of Axes: 10 (12)
Axis Designation: Z1 / X1 - Y1 / X2 - Y2 / X3 - Z3 / X4 - Z4 - V4 (C1+C4 optional)
Maximum Number of Offsets: 11
Spindle Motor Designations: S1 - S2 - S3 - S4 - S5
Minimum Program Increment: 1 µm
Minimum Axis Resolution: 0.1 µm
Number of Tool Offsets: 31 per axis
Override for Spindles and Axes: 0 - 120 %
Calculation of Actual Production Time: Yes
Graphical Simulation in the Program: Yes
TB-DECO Programming Language: ISO TRANSMIT function Yes
TB-DECO Software Programming Language:
Tool Offset Management
Chamfering Functions
Tool Radius Compensation
Origin Offset Management
Lag and Differential Function
Spindle Synchronization
Synchronized Feeds (mm/rev)
Thread Resuming with Constant, Increasing, or Decreasing Pitch
Polygonal Turning in a Sleeve
Programming in Inches
Operations with C-axis
Please note that the data provided is based on the information in our possession, obtained from manufacturers where possible; therefore, despite our good faith, due to the nature and complexity of the products, such data may be incomplete and/or inaccurate, and under no circumstances can its accuracy be guaranteed, nor does it constitute any contractual obligation. We always recommend inspecting the products and requesting confirmation of the data.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 112 |
| Last activity | May 13, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
Offer Title: Automatic lathe with movable tailstock TORNOS DECO20A
Manufacturer: TORNOS
Model: DECO20A
Technical Condition: As-is, where-is
Technical Specifications:
Category: Lathe Type
Type: Sliding headstock
SLIDING HEADSTOCK (Z1 AXIS) + C1
Tool Capacity: Ø 20 mm (Ø 0.79 in)
Tool Diameter: 200 mm (7.87 in)
Programmable Rotation Speed: 100 - 10,000 rpm
Max Number of Cross Holes, Cross Cutter: 0.1°
Motor Power: 5.5 kW (7.5 kW)
MAIN SPINDLE (X1/Y1) (X2/Y2)
Number of Tools: 2 x 5
Tool Section: 16 x 16 mm (0.63 x 0.63 in)
Max Number of Cross Holes, Cross Cutter: 4 + 2
Programmable Rotation Speed: 100 - 8000 rpm
Motor Power: 1.5 kW (2.2 kW)
COMBINED TOOLING (X3/Y3)
Max Number of Tools: 4
Spindle Speed: 100 - 6000 rpm
Max Motor Power: 1.5 kW (2.2 kW)
COUNTERSPINDLE (X4 / Y4 / Z4) + C4
Max Clamping Diameter: 20 mm (0.79 in)
Max Turnable Length: 200 mm (7.87 in)
Speed: 100 - 10,000 rpm
C-axis Resolution: 0.1°
Sub-spindle Power: 1.1 kW (3.7 kW)
Max Number of Operations: 7
Number of Tools: 7
Motorized Tool Speed: 100 - 8,000 rpm
Power of Motorized Tools: 1.5 kW (2.2 kW)
PARALLEL CNC
Number of Simultaneous Axes: All axes
Number of Interpolated Axes: All axes
TWO VERSIONS
8 axes with sub-spindle
10 axes with front attachment and sub-spindle
Compliance: Complies with European Safety Standards CE/CEM
General Specifications:
Length: 2270 mm (89.37 in)
Width: 1650 mm (64.96 in)
Height: 2500 mm (98.43 in)
Height at Spindle Center: 1100 mm (43.31 in)
Weight: 3500 kg
Coolant Capacity: 200 liters
Adjustable Pump Flow Rate: 9 - 59 liters/min
Chip Tray Capacity: 130 liters
Installed Power: 14 kVA
Pneumatic Unit Pressure: 6 bar (87 PSI)
Operating Ambient Temperature: 5 - 35 °C
Paint Finish: Gray RAL 7035 and Blue RAL 5013
Numerical Control and Programming Software:
Control Type: PNC - DECO
Programming Software: TB - DECO
Axis Encoders: Absolute serial
Motor Type (Axes and Spindles): AC (Alternating Current) motors
Maximum Number of Axes: 10 (12)
Axis Designation: Z1 / X1 - Y1 / X2 - Y2 / X3 - Z3 / X4 - Z4 - V4 (C1+C4 optional)
Maximum Number of Offsets: 11
Spindle Motor Designations: S1 - S2 - S3 - S4 - S5
Minimum Program Increment: 1 µm
Minimum Axis Resolution: 0.1 µm
Number of Tool Offsets: 31 per axis
Override for Spindles and Axes: 0 - 120 %
Calculation of Actual Production Time: Yes
Graphical Simulation in the Program: Yes
TB-DECO Programming Language: ISO TRANSMIT function Yes
TB-DECO Software Programming Language:
Tool Offset Management
Chamfering Functions
Tool Radius Compensation
Origin Offset Management
Lag and Differential Function
Spindle Synchronization
Synchronized Feeds (mm/rev)
Thread Resuming with Constant, Increasing, or Decreasing Pitch
Polygonal Turning in a Sleeve
Programming in Inches
Operations with C-axis
Please note that the data provided is based on the information in our possession, obtained from manufacturers where possible; therefore, despite our good faith, due to the nature and complexity of the products, such data may be incomplete and/or inaccurate, and under no circumstances can its accuracy be guaranteed, nor does it constitute any contractual obligation. We always recommend inspecting the products and requesting confirmation of the data.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Max. Ø | 20 mm |
| Max. length | 200 mm |
| Type of CNC | |
| Type of main spindle | |
| Type of back spindle | |
| Spindle speed | 10000 rpm |
| ------------------- | |
| Length x width x height | 2270.0 × 1650.0 × 2500.0 |
| Weight | 3500 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 13/05/2026 |
| Client type | Machinery dealer |
| Active since | 2007 |
| Offers online | 112 |
| Last activity | May 13, 2026 |
GAMBA GIOVANNI S.R.L., known by its brand Gamba Macchine, is a trusted Italian company with over 70 years of experience in the machine tool industry. Based in Gardone Val Trompia in the heart of Italy’s industrial region, the company specializes in the sale of high-quality new and used metalworking machinery for chip removal processes.
Founded in 1950 by Giovanni Gamba, the company has grown into a reference point for precision and reliability in the European industrial market. Today, it is managed by the second and third generations of the Gamba family who continue to uphold a strong tradition of technical expertise and customer-oriented service.
Gamba Macchine operates from two strategic locations in the province of Brescia, offering a wide range of machinery from leading international manufacturers. Their deep knowledge of production processes allows them to assist clients in finding the most suitable and efficient solutions for their machining needs.
With a strong focus on quality, performance, and after-sales support, Gamba Macchine is the ideal partner for companies looking to invest in reliable and cost-effective metalworking solutions. Whether you need a single machine or a complete production line, Gamba Macchine delivers value, expertise, and confidence.
Автоматичен струг с подвижен носач TORNOS DECO20A
Automatický soustruh s pohyblivou suportovou hlavou TORNOS DECO20A
Automatisk drejebænk med bevægelig støtte TORNOS DECO20A
Automat-Drehmaschine mit verfahrbarem Reitstock TORNOS DECO20A
Αυτόματο τόρνος με κινητή ουρά TORNOS DECO20A
Automatic lathe with movable tailstock TORNOS DECO20A
Torno automático con contrapunto móvil TORNOS DECO20A
Tour automatique à poupée mobile TORNOS DECO20A
Automatski tokarski stroj s pomičnim repom TORNOS DECO20A
Mozgó kocsis automata eszterga TORNOS DECO20A
Tornio automatico a fantina mobile TORNOS DECO20A
Automatinis tekinimo staklis su judančia atrama TORNOS DECO20A
Automatische draaibank met beweegbare steun TORNOS DECO20A
Automatyczny tokarka z ruchomym suportem TORNOS DECO20A
Torno automático com contraponto móvel TORNOS DECO20A
Strung automat cu suport mobil TORNOS DECO20A
Автоматический токарный станок с подвижной бабкой TORNOS DECO20A
Аутоматски тобџија са помичним репом TORNOS DECO20A
Automatisk svarv med rörlig stöd TORNOS DECO20A
Hareketli kuyruklu otomatik torna tezgahı TORNOS DECO20A
EN
- Languages
English (GB)