Price on request
Make an offer| Manufacturer | Tokai |
|---|---|
| Model | TP 150 |
| Year | 2001 |
| Location | Germany
|
| Category | Forging - Hydraulic presses |
| Product id | P220310040 |
| Language |
Tokai TP 150
Lis na kov Tokai TP 150
Tokai TP 150
Tokai TP 150 Presse
Tokai TP 150
Tokai TP 150 Hydraulic press
Prensa Tokai TP 150
Presse Tokai TP 150
Tokai TP 150
Tokai TP 150
Pressa Tokai TP 150
Tokai TP 150
Tokai TP 150
Prasa Tokai TP 150
Tokai TP 150
Tokai TP 150
Tokai TP 150 Гидравлический пресс
Tokai TP 150
Tokai TP 150
Hidrolik Pres Tokai TP 150
|
| Power in tons | 148 T |
| Table length | 800 mm |
| Table width | 1800 mm |
| Ram stroke | 900 mm |
| Engine Power | 7.5 kW |
| ------------------- | |
| Weight | 7000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 11/02/2026 |
This Tokai TP 150 hydraulic press, manufactured in 2001, is designed for the production of round bars and profiles made from hardmetal powder. The machine operates under vacuum conditions to avoid cavities and cracks in the workpieces. It features a large extrusion cylinder with an internal size of 300 x 900 mm and a stroke length of 900 mm. The extrusion cylinder pressure ranges from 10 to 148 tons, supported by a powerful 7.5 kW heating system for the material cylinder head and an 11 kW hydraulic pump drive. The machine has a table size of approximately 800 x 1800 mm, with adjustable height and length capabilities of 50 x 100 mm, and a ram stroke of 900 mm. The overall height of the machine is 3300 mm, and it weighs around 7000 kg.
The extrusion cylinder can swivel between 90 and 60 degrees, allowing the extruded product to flow automatically onto workpiece tablets, which are advanced piece by piece via step motors. The production cycle is managed by a Mitsubishi control system (Model A 1SJHCPU) featuring a control panel with displays for heating temperature, angle adjustment, vacuum underpressure, and various pressure stages. The machine supports four heating cycles—one for the extrusion nozzle and three for warming up the powder material.
Additional features include a material cut-off device and a vacuum pump. The hydraulic tank has a capacity of 400 liters. The machine’s electrical load is approximately 20 kW operating at 400 V and 50 Hz. Visually, the press is large with a blue and white color scheme, equipped with a horizontally mounted hydraulic cylinder on top. It includes a control cabinet marked with CE certification and has visible pressure gauges and control dials. The machine shows minor surface wear and some paint chips but appears well-maintained overall. Connected electrical cables, hoses, and some wooden crates with parts or accessories are present near the base.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Pressure of Extrusion cylinder 10 - 148 to
Size of Extrusion Cylinder internal 300 x 900 mm
Stroke of Extrusion Cylinder 900 mm
Speed of Extrusion Cylinder fwd/return/extruding 10/11/8 sec.
Extrusion cylinder swivels from 90 to 60 °
Size of workpiece tablets approx.. 143 x 800 mm
Size of whole tablets-table 800 x 1.800 mm
Adjustment of table height and length 50 x 100 mm
Capacity of Hydraulic tank 400 Liter
Heating of Material Cylinder head 7,5 kW
Hydraulic Pump drive 11 kW
Total electrical load approx. 20 kW - 400 V - 50 cycles
Weight approx. 7 to / height of machine 3,30 m
Accessories / Special Features:
· This Machine is built and designed for the Production of round bars and Profiles made out of hardmetalpowder, which will be heatened and formed under vacuum to avoid cavities and or cracks in the workpieces.
· The complete Extrusion Head can be swivelled so that the extruded product flows automatically onto workpiece tablets which will be always forwarder piece by piece. The movement are provided by stepmotors lengthwise.
· The complete production cycle is controlled and programmed by a MITSUBISHI Control System Model A 1SJHCPU. There is a controlpanel with displays for Heating-Temperature, Angle adjustment, Vaccuum Underpressure display and various pressure steps.
· 4 Heating cycles one for the extrusion nozzle and 3 for warming-up the powdermaterial.
· Material Cut-Off Device, Vacuum pump, parts, etc.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 172 |
| Last activity | April 21, 2026 |
Pressure of Extrusion cylinder 10 - 148 to
Size of Extrusion Cylinder internal 300 x 900 mm
Stroke of Extrusion Cylinder 900 mm
Speed of Extrusion Cylinder fwd/return/extruding 10/11/8 sec.
Extrusion cylinder swivels from 90 to 60 °
Size of workpiece tablets approx.. 143 x 800 mm
Size of whole tablets-table 800 x 1.800 mm
Adjustment of table height and length 50 x 100 mm
Capacity of Hydraulic tank 400 Liter
Heating of Material Cylinder head 7,5 kW
Hydraulic Pump drive 11 kW
Total electrical load approx. 20 kW - 400 V - 50 cycles
Weight approx. 7 to / height of machine 3,30 m
Accessories / Special Features:
· This Machine is built and designed for the Production of round bars and Profiles made out of hardmetalpowder, which will be heatened and formed under vacuum to avoid cavities and or cracks in the workpieces.
· The complete Extrusion Head can be swivelled so that the extruded product flows automatically onto workpiece tablets which will be always forwarder piece by piece. The movement are provided by stepmotors lengthwise.
· The complete production cycle is controlled and programmed by a MITSUBISHI Control System Model A 1SJHCPU. There is a controlpanel with displays for Heating-Temperature, Angle adjustment, Vaccuum Underpressure display and various pressure steps.
· 4 Heating cycles one for the extrusion nozzle and 3 for warming-up the powdermaterial.
· Material Cut-Off Device, Vacuum pump, parts, etc.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 148 T |
| Table length | 800 mm |
| Table width | 1800 mm |
| Ram stroke | 900 mm |
| Engine Power | 7.5 kW |
| ------------------- | |
| Weight | 7000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 11/02/2026 |
This Tokai TP 150 hydraulic press, manufactured in 2001, is designed for the production of round bars and profiles made from hardmetal powder. The machine operates under vacuum conditions to avoid cavities and cracks in the workpieces. It features a large extrusion cylinder with an internal size of 300 x 900 mm and a stroke length of 900 mm. The extrusion cylinder pressure ranges from 10 to 148 tons, supported by a powerful 7.5 kW heating system for the material cylinder head and an 11 kW hydraulic pump drive. The machine has a table size of approximately 800 x 1800 mm, with adjustable height and length capabilities of 50 x 100 mm, and a ram stroke of 900 mm. The overall height of the machine is 3300 mm, and it weighs around 7000 kg.
The extrusion cylinder can swivel between 90 and 60 degrees, allowing the extruded product to flow automatically onto workpiece tablets, which are advanced piece by piece via step motors. The production cycle is managed by a Mitsubishi control system (Model A 1SJHCPU) featuring a control panel with displays for heating temperature, angle adjustment, vacuum underpressure, and various pressure stages. The machine supports four heating cycles—one for the extrusion nozzle and three for warming up the powder material.
Additional features include a material cut-off device and a vacuum pump. The hydraulic tank has a capacity of 400 liters. The machine’s electrical load is approximately 20 kW operating at 400 V and 50 Hz. Visually, the press is large with a blue and white color scheme, equipped with a horizontally mounted hydraulic cylinder on top. It includes a control cabinet marked with CE certification and has visible pressure gauges and control dials. The machine shows minor surface wear and some paint chips but appears well-maintained overall. Connected electrical cables, hoses, and some wooden crates with parts or accessories are present near the base.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 172 |
| Last activity | April 21, 2026 |
EN
- Languages
English (GB)