Price on request
Make an offer| Capacity | 3.2 T |
| Ram stroke | 1250 mm |
| ------------------- | |
| Length x width x height | 3820.0 × 1800.0 × 5340.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This forging hammer, model M2145, is manufactured by TMP Voronezh Russia and is designed for heavy-duty forging applications. It has a forging capacity of 3.15 tons and delivers a rated striking energy of 80 KJ. The hammer operates with a maximum number of blows of 60 per minute, providing efficient and consistent performance. It features a ram stroke length of 1250 mm and an uprights distance of 710 mm, with ram dimensions measuring 750 mm. The die holder is 1000 mm wide, and the minimum distance between the die holder and ram is 340 mm. The machine is designed to operate with steam or air pressure in the range of 0.7 to 0.9 MPa.
The overall dimensions of the forging hammer are 3820 mm in length, 1800 mm in width, and 5340 mm in height. The mass of the unit, excluding the anvil block, is approximately 25 tons, while the anvil block itself weighs about 63 tons.
The machine includes visible mechanical components such as springs on the upper structure and a central hydraulic or pneumatic cylinder located at the top section. Mechanical linkages and control rods are also present, contributing to the hammer's operational mechanics. The base is equipped with large mounting holes, facilitating secure floor installation.
The forging hammer shows signs of wear, including rust, paint wear, dirt, and some corrosion spots on the frame and components. The surface is covered with dust and debris, and there is some industrial clutter around the machine. Despite these cosmetic conditions, the structural integrity appears intact. The machine is currently stationary and not in active operation.
This robust forging hammer is suitable for industrial forging tasks where high striking energy and reliable mechanical operation are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Item Title: Hammer Forging Pneumatic M2145
Manufacturer: TMP Voronezh, Russia
Model: M2145
Condition: Good Condition
Technical Condition: As-is, where-is
Capacity: 3.15 tons
Rated Striking Energy: 80 KJ
Maximum Number of Blows per Minute: 60
Ram Stroke: 1250 mm
Uprights Distance: 710 mm
Ram Dimensions: 750 mm
Die Holder: 1000 mm
Minimum Die Holder to Ram Distance: 340 mm
Steam/Air Pressure: 0.7-0.9 MPa
Dimensions: 3820 x 1800 x 5340 mm
Mass (less Anvil Block): 25 tons
Mass of Anvil Block: 63 tons
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Item Title: Hammer Forging Pneumatic M2145
Manufacturer: TMP Voronezh, Russia
Model: M2145
Condition: Good Condition
Technical Condition: As-is, where-is
Capacity: 3.15 tons
Rated Striking Energy: 80 KJ
Maximum Number of Blows per Minute: 60
Ram Stroke: 1250 mm
Uprights Distance: 710 mm
Ram Dimensions: 750 mm
Die Holder: 1000 mm
Minimum Die Holder to Ram Distance: 340 mm
Steam/Air Pressure: 0.7-0.9 MPa
Dimensions: 3820 x 1800 x 5340 mm
Mass (less Anvil Block): 25 tons
Mass of Anvil Block: 63 tons
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Capacity | 3.2 T |
| Ram stroke | 1250 mm |
| ------------------- | |
| Length x width x height | 3820.0 × 1800.0 × 5340.0 |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This forging hammer, model M2145, is manufactured by TMP Voronezh Russia and is designed for heavy-duty forging applications. It has a forging capacity of 3.15 tons and delivers a rated striking energy of 80 KJ. The hammer operates with a maximum number of blows of 60 per minute, providing efficient and consistent performance. It features a ram stroke length of 1250 mm and an uprights distance of 710 mm, with ram dimensions measuring 750 mm. The die holder is 1000 mm wide, and the minimum distance between the die holder and ram is 340 mm. The machine is designed to operate with steam or air pressure in the range of 0.7 to 0.9 MPa.
The overall dimensions of the forging hammer are 3820 mm in length, 1800 mm in width, and 5340 mm in height. The mass of the unit, excluding the anvil block, is approximately 25 tons, while the anvil block itself weighs about 63 tons.
The machine includes visible mechanical components such as springs on the upper structure and a central hydraulic or pneumatic cylinder located at the top section. Mechanical linkages and control rods are also present, contributing to the hammer's operational mechanics. The base is equipped with large mounting holes, facilitating secure floor installation.
The forging hammer shows signs of wear, including rust, paint wear, dirt, and some corrosion spots on the frame and components. The surface is covered with dust and debris, and there is some industrial clutter around the machine. Despite these cosmetic conditions, the structural integrity appears intact. The machine is currently stationary and not in active operation.
This robust forging hammer is suitable for industrial forging tasks where high striking energy and reliable mechanical operation are required.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 14, 2026 |
Пневматичен чук за коване M2145
Pneumatický kladivový kovářský stroj M2145
Hammer-smedemaskine, trykluftdrevet, M2145
Pneumatische Hammerschmiede M2145
Πνευματικό σφυρί σφυρηλάτησης M2145
Hammer Forging Pneumatic M2145
Martillo neumático de forja M2145
Marteau pneumatique à forger M2145
Pneumatski čekić za oblikovanje M2145
M2145 pneumatikus kalapácsos kovácsoló
Forgiatrice a martello pneumatica M2145
Pneumatinis plaktuvinis kalimo staklės M2145
Pneumatische hamersmeedmachine M2145
Kuta pneumatyczna M2145
Martelo de forja pneumático M2145
Mașină pneumatică de forjat cu ciocan M2145
Пневматическая молотковая ковочная машина M2145
Pneumatsko M2145 za kovanje čekićem
Hammarsmide, tryckluftsdriven, M2145
Pnömatik Çekiç Dövme Makinesi M2145
EN
- Languages
English (GB)