Price on request
Make an offer| Force | T |
| Stroke length | 350 mm |
| Table length | 1200 mm |
| Table width | 1400 mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 5645.0 × 4340.0 × 6850.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This is a TMP Voronezh Russia forging press model AKKB8544 with a capacity of 2500 tons. The press features a slide stroke length of 350 mm and can perform up to 70 continuous strokes per minute, with a single stroke rate of 16 per minute. It is equipped with two connecting rods and offers a die space shut height of 890 mm, with die space adjustment in the ram of 10 mm. The table measures 1200 mm in length and 1400 mm in width, while the ram dimensions are 1090 mm by 1150 mm. The press includes an upper knockout with a power of 6.3 tons and a stroke of 50 mm, as well as one pusher. Additionally, there is a lower mechanical knockout with two positions, powered at 10 tons with a 50 mm stroke and one pusher. The uprights opening dimensions are 800 mm in length and 1000 mm in height.
The main motor power is rated at 110 kW. Overall machine dimensions are 5645 mm in length, 4340 mm in width, and 6850 mm in height above floor level. The press weighs approximately 185 tons.
The machine has a vertical frame structure painted green and includes a control panel with multiple colored buttons and switches mounted on the right side. Safety railings are installed at the top of the frame. The press ram is visible in the lower central section and incorporates three vertical cylinders or pistons. A large flywheel or motor housing is located on the upper right side, connected by multiple belts for power transmission. Metal pipes and cables are attached to the frame, and an electric motor or pump is mounted above the cylinders.
The internal mechanical gear components and shafts are visible, showing signs of grease and dirt accumulation. The exterior surfaces of the machine exhibit visible wear, rust, and dirt, indicating usage over time. This equipment is suitable for heavy forging operations requiring substantial force and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 2500 tons,
Slide stroke : 350 mm,
Continuous stroke per minute : 70 N°,
Connecting rod : 2 N°,
Single stroke per minute : 16 N°,
Die space shut height: 890 mm,
Die space adjustment in the ram : 10 mm,
Table dimensions :-
L to R : 1200 mm, F to B : 1400 mm,
Ram dimensions :-
L to R : 1090 mm, F to B : 1150 mm,
Upper knockout :-
Power : 6,3 TN,
Stroke : 50 mm,
Pushers :1 N°,
Lower mechanical knockout (with 2 positions)
Power : 10 tn,
Stroke : 50 mm,
Pushers : 1 N°,
Uprights opening dimensions :-
L to R : 800 mm,
Height : 1000 mm,
Main motor power : 110 kW,
Overall dimensions :-
L to R : 5645 mm,
F to B : 4340 mm,
Height above floor level : 6850 mm,
Press weight : 185 tons.
Item Condition: Good condition
Capacity Tons: 2500
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Forging Equipment
Capacity : 2500 tons,
Slide stroke : 350 mm,
Continuous stroke per minute : 70 N°,
Connecting rod : 2 N°,
Single stroke per minute : 16 N°,
Die space shut height: 890 mm,
Die space adjustment in the ram : 10 mm,
Table dimensions :-
L to R : 1200 mm, F to B : 1400 mm,
Ram dimensions :-
L to R : 1090 mm, F to B : 1150 mm,
Upper knockout :-
Power : 6,3 TN,
Stroke : 50 mm,
Pushers :1 N°,
Lower mechanical knockout (with 2 positions)
Power : 10 tn,
Stroke : 50 mm,
Pushers : 1 N°,
Uprights opening dimensions :-
L to R : 800 mm,
Height : 1000 mm,
Main motor power : 110 kW,
Overall dimensions :-
L to R : 5645 mm,
F to B : 4340 mm,
Height above floor level : 6850 mm,
Press weight : 185 tons.
Item Condition: Good condition
Capacity Tons: 2500
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Force | T |
| Stroke length | 350 mm |
| Table length | 1200 mm |
| Table width | 1400 mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 5645.0 × 4340.0 × 6850.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This is a TMP Voronezh Russia forging press model AKKB8544 with a capacity of 2500 tons. The press features a slide stroke length of 350 mm and can perform up to 70 continuous strokes per minute, with a single stroke rate of 16 per minute. It is equipped with two connecting rods and offers a die space shut height of 890 mm, with die space adjustment in the ram of 10 mm. The table measures 1200 mm in length and 1400 mm in width, while the ram dimensions are 1090 mm by 1150 mm. The press includes an upper knockout with a power of 6.3 tons and a stroke of 50 mm, as well as one pusher. Additionally, there is a lower mechanical knockout with two positions, powered at 10 tons with a 50 mm stroke and one pusher. The uprights opening dimensions are 800 mm in length and 1000 mm in height.
The main motor power is rated at 110 kW. Overall machine dimensions are 5645 mm in length, 4340 mm in width, and 6850 mm in height above floor level. The press weighs approximately 185 tons.
The machine has a vertical frame structure painted green and includes a control panel with multiple colored buttons and switches mounted on the right side. Safety railings are installed at the top of the frame. The press ram is visible in the lower central section and incorporates three vertical cylinders or pistons. A large flywheel or motor housing is located on the upper right side, connected by multiple belts for power transmission. Metal pipes and cables are attached to the frame, and an electric motor or pump is mounted above the cylinders.
The internal mechanical gear components and shafts are visible, showing signs of grease and dirt accumulation. The exterior surfaces of the machine exhibit visible wear, rust, and dirt, indicating usage over time. This equipment is suitable for heavy forging operations requiring substantial force and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 19, 2026 |
Преса TMP Voronezh Russia AKKB8544
Lis TMP Voronezh Russia AKKB8544
TMP Voronezh Russia AKKB8544 Presse
TMP Voronezh Russia AKKB8544 Presse
Πρέσα TMP Voronezh Russia AKKB8544
TMP Voronezh Russia AKKB8544 Press
Prensa TMP Voronezh Russia AKKB8544
Presse TMP Voronezh Russia AKKB8544
Preša TMP Voronezh Russia AKKB8544
TMP Voronezh Russia AKKB8544 Prés
Pressa TMP Voronezh Russia AKKB8544
TMP Voronezh Russia AKKB8544 Presas
TMP Voronezh Russia AKKB8544 Pers
Prasa TMP Voronezh Russia AKKB8544
Prensa TMP Voronezh Russia AKKB8544
Prese TMP Voronezh Russia AKKB8544
TMP Voronezh Russia AKKB8544 Пресс
Presa TMP Voronezh Russia AKKB8544
TMP Voronezh Russia AKKB8544 Press
Pres TMP Voronezh Russia AKKB8544
EN
- Languages
English (GB)