T I M E S A V E R S ( The Netherlands)
Wet Grinder for Deburring and Finishing with Vacuum Wide Belt
Model Multiline 100741 Series 1350 WRDOW-N
Year 2002
______________________________________________________________
Grinding Width maximum 1.350 mm
Max. height of workpiece approx. 1 – 50 mm
Workpiece FeedRange of Vacuum belt 1 – 10 m/Min.
Consisting of following aggregates:
1.) Height adjustable Vacuum table with belt for machining smaller parts, width of vacuum track approx. 780 mm wide, in the middle of the belt, Belt drive motorized with 3 kW-Motor steplessly adjustable for a feed range 1-10 m/Min., steplessly height adjustable table up to 60 mm, all operations can be deducted by a joystick and position and speed are displaye3d by a DRO, Device is suitable for wet grinding process.
2.) Wide abrasive belt roller unit, roller dia. 180 mm x 1350 length, Drive 15/19 kW, roller
speed steplessly adjustable 11 m/sec, fine positioning of height of roller and pneumatic Oscillation of abrasive belt crosswise. Various spare Abrasive belts available.
3.) Vertical Grinding/Deburring Disc (Disc/Brush/System) with a dia. of 1200 mm, consisting of easy adjusting nylon Pads/Segments in different Quality available, ideal for
cleaning and deburring And rounding of edges on differend workpieses. Also
possible to machine WP with different heights. Motor Drive 7,5 kW, the Disc is oscillating (
drive 2,2 kW) crosswise on full width of 1350 mm.
4.) Wide abrasive belt roller unit, roller dia. 180 mm x 1.350 length, Drive 18,5 kW, roller
speed steplessly adjustable up to 11 m/sec, fine positioning of roller and pneumatic Oscillation of abrasive belt crosswise. Various spare Abrasive belts available.
5.) “Wet”-Grinding Execution = complete System consisting of Coolant
agent supply by pumps and a Band Filter System built-in the buttom of the machine.
Coolant Supply thru the Hollow Spindle of the disc unit, return of coolant thru the belt into
the coolant tank. Coolant mist collector mounted on top of machine and ventilation unit for drying the workpieces. Splashguards and sidedoors in stainless steel.
6.) Control panel on left side of machine with ampere meters for motor
power and digital readouts for Speeds and positioning, joystick for table adjustment.
Rollers for the workpiece thru-feed in font and back area of machine, Emergency-stopp !
Total electrical load approx. 65 kW - 400 V – 50 Hz Weight approx. 7,5to Req.shop height 3,5 m
Condition : good – can be inspected under power

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Weight 7500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Description

T I M E S A V E R S ( The Netherlands)
Wet Grinder for Deburring and Finishing with Vacuum Wide Belt
Model Multiline 100741 Series 1350 WRDOW-N
Year 2002
______________________________________________________________
Grinding Width maximum 1.350 mm
Max. height of workpiece approx. 1 – 50 mm
Workpiece FeedRange of Vacuum belt 1 – 10 m/Min.
Consisting of following aggregates:
1.) Height adjustable Vacuum table with belt for machining smaller parts, width of vacuum track approx. 780 mm wide, in the middle of the belt, Belt drive motorized with 3 kW-Motor steplessly adjustable for a feed range 1-10 m/Min., steplessly height adjustable table up to 60 mm, all operations can be deducted by a joystick and position and speed are displaye3d by a DRO, Device is suitable for wet grinding process.
2.) Wide abrasive belt roller unit, roller dia. 180 mm x 1350 length, Drive 15/19 kW, roller
speed steplessly adjustable 11 m/sec, fine positioning of height of roller and pneumatic Oscillation of abrasive belt crosswise. Various spare Abrasive belts available.
3.) Vertical Grinding/Deburring Disc (Disc/Brush/System) with a dia. of 1200 mm, consisting of easy adjusting nylon Pads/Segments in different Quality available, ideal for
cleaning and deburring And rounding of edges on differend workpieses. Also
possible to machine WP with different heights. Motor Drive 7,5 kW, the Disc is oscillating (
drive 2,2 kW) crosswise on full width of 1350 mm.
4.) Wide abrasive belt roller unit, roller dia. 180 mm x 1.350 length, Drive 18,5 kW, roller
speed steplessly adjustable up to 11 m/sec, fine positioning of roller and pneumatic Oscillation of abrasive belt crosswise. Various spare Abrasive belts available.
5.) “Wet”-Grinding Execution = complete System consisting of Coolant
agent supply by pumps and a Band Filter System built-in the buttom of the machine.
Coolant Supply thru the Hollow Spindle of the disc unit, return of coolant thru the belt into
the coolant tank. Coolant mist collector mounted on top of machine and ventilation unit for drying the workpieces. Splashguards and sidedoors in stainless steel.
6.) Control panel on left side of machine with ampere meters for motor
power and digital readouts for Speeds and positioning, joystick for table adjustment.
Rollers for the workpiece thru-feed in font and back area of machine, Emergency-stopp !
Total electrical load approx. 65 kW - 400 V – 50 Hz Weight approx. 7,5to Req.shop height 3,5 m
Condition : good – can be inspected under power

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Weight 7500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Here is a selection of similar machines

Timesavers Multiline 100741 Deburring machine