Price on request
Make an offer| Rpm | rpm |
| Bowl capacity | L |
| Bowl diameter | mm |
| Output L/h | |
| % fat | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 09/05/2026 |
This Tetra Pak/Alfa Laval BBRPX 618 HGV is a hermetic bactofuge separator designed for the dairy industry to remove heat-resistant spores that can survive higher heat treatments than most microorganisms. It also effectively reduces somatic cells by exploiting density differences. The machine processes whole milk, standardized milk, or skim milk at temperatures between 55 and 57°C. Capacity adjustments are possible by modifying the size of the top centrifugal pump.
This unit is a two-way machine featuring an internal concentration system for the bactofugate, which minimizes product losses. The bactofugate is discharged along with sludge, and depending on the discharge frequency, total product loss is approximately 0.15% of the total flow.
Included with the machine are all valves for flushing the seals and the spray bowl in the cyclone (model L-Kap), a new 37 kW motor directly connected by worm gear, an operation water module (OWM), a constant pressure valve (CPM) on the outlet of cleaned milk with a pressure transmitter to control counter pressure, and manometers on both inlet and outlet. The cyclone for sludge collection is CIP cleanable. The package also contains an operation manual with installation instructions for the foundation frame, a spare parts catalogue, and an electronic schematic.
Additional equipment includes a stainless steel water pressure increase pump with an expansion vessel to maintain constant water pressure at 3 bar with a water filter, and a steel foundation frame designed for mounting on a concrete floor. A complete set of maintenance tools is provided, including a pressing tool and ring key.
The control panel is housed in a Rittal box (80x120x30 cm) mounted on a stainless steel support frame with caster wheels for mobility. It features a 7-inch Siemens KTP700 touchscreen operation panel, a Siemens 1200 series PLC CPU programmed with TIA Portal, and a Schneider Altivar ATV930D37N4 frequency drive. The panel includes interconnecting cabling and is UL508 certified. It can operate on 60 Hz power with minor adaptations for 50 Hz.
The HMI screen allows setting bowl opening intervals and timings, displays alarm messages and failure lists, and shows an ampere meter, rotation counter, and hours counter. Control buttons include start, stop, CIP, bypass, manual discharge, and overflow time. Discharge intervals can be adjusted based on milk quality. The panel manages all water and product valves and communicates with the feed line via Ethernet.
The separator bowl and various components are made of stainless steel and appear clean and well-maintained with no visible damage or corrosion. The electric motor and metal assemblies show no signs of rust or wear, indicating good upkeep. Overall, this bactofuge separator offers a comprehensive setup for efficient milk processing with advanced control features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Bactofuge Separator
The hermetic bactofuge is designed to remove heat-resistant spores that can survive higher heat treatments than most other microorganisms. It also reduces somatic cells based on differences in density.
Whole milk, standardized milk, or skim milk can be processed at temperatures of 55–57°C.
The capacity can be adjusted by modifying the size of the top centrifugal pump.
This is a 2-way machine with an internal concentration system for bactofugate, ensuring minimal product losses.
The bactofugate is discharged together with the sludge, and depending on the discharge frequency, the total product loss is approximately 0.15% of the total flow.
Including:
• Fully mechanical reconditioned.
• All valves for flushing of the seals and the spray bowl in the cyclone (model L-Kap).
• New Motor 37kW direct connected motor by worm gear.
• Operation water module (OWM).
• CPM (constant pressure valve) on outlet cleaned milk and pressure transmitter to control the counter pressure.
• Manometer on in- and outlet.
• Counter pressure valve Tetra CPM (Single up to 25m3)
• Cyclone for sludge collecting CIP cleanable.
• Operation manual with installation instructions of the foundation frame, spare parts catalogue and electronic scheme.
• Water pression increase pump with expansion vessel in stainless steel. For constant water pressure at 3 bar with water filter.
• Steel foundation frame to be mounted in the concrete floor.
• Complete set of Tools for maintenance of the unit, including pressing tool and ring key.
New control panel:
• Rittal box AE1017.600 Dimensions: 80x120x30cm
• On a stainless-steel support frame.
In the box:
• Touch screen operation panel 7” model: Siemens KTP700
• PLC CPU Siemens 1200 series Tia portal.
• Freq drive model: Schneider Altivar ATV930D37N4
• Inter connecting cabling.
In the HMI screen:
• To set bowl opening intervals, timings.
• Alarm messages and Failures list.
• Ampere meter, rotation counter and hours counter.
• Control buttons: Start-stop-CIP-bypass-manual discharge-overflow time.
• The discharge intervals can be adjusted depending on the milk quality.
This panel is UL508 certified and can run on 60hz with small adaptations on 50hz.
For control of all water and product valves and communication with feed line through Ethernet.
Download pdf
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 122 |
| Last activity | May 12, 2026 |
Bactofuge Separator
The hermetic bactofuge is designed to remove heat-resistant spores that can survive higher heat treatments than most other microorganisms. It also reduces somatic cells based on differences in density.
Whole milk, standardized milk, or skim milk can be processed at temperatures of 55–57°C.
The capacity can be adjusted by modifying the size of the top centrifugal pump.
This is a 2-way machine with an internal concentration system for bactofugate, ensuring minimal product losses.
The bactofugate is discharged together with the sludge, and depending on the discharge frequency, the total product loss is approximately 0.15% of the total flow.
Including:
• Fully mechanical reconditioned.
• All valves for flushing of the seals and the spray bowl in the cyclone (model L-Kap).
• New Motor 37kW direct connected motor by worm gear.
• Operation water module (OWM).
• CPM (constant pressure valve) on outlet cleaned milk and pressure transmitter to control the counter pressure.
• Manometer on in- and outlet.
• Counter pressure valve Tetra CPM (Single up to 25m3)
• Cyclone for sludge collecting CIP cleanable.
• Operation manual with installation instructions of the foundation frame, spare parts catalogue and electronic scheme.
• Water pression increase pump with expansion vessel in stainless steel. For constant water pressure at 3 bar with water filter.
• Steel foundation frame to be mounted in the concrete floor.
• Complete set of Tools for maintenance of the unit, including pressing tool and ring key.
New control panel:
• Rittal box AE1017.600 Dimensions: 80x120x30cm
• On a stainless-steel support frame.
In the box:
• Touch screen operation panel 7” model: Siemens KTP700
• PLC CPU Siemens 1200 series Tia portal.
• Freq drive model: Schneider Altivar ATV930D37N4
• Inter connecting cabling.
In the HMI screen:
• To set bowl opening intervals, timings.
• Alarm messages and Failures list.
• Ampere meter, rotation counter and hours counter.
• Control buttons: Start-stop-CIP-bypass-manual discharge-overflow time.
• The discharge intervals can be adjusted depending on the milk quality.
This panel is UL508 certified and can run on 60hz with small adaptations on 50hz.
For control of all water and product valves and communication with feed line through Ethernet.
Download pdf
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Rpm | rpm |
| Bowl capacity | L |
| Bowl diameter | mm |
| Output L/h | |
| % fat | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 09/05/2026 |
This Tetra Pak/Alfa Laval BBRPX 618 HGV is a hermetic bactofuge separator designed for the dairy industry to remove heat-resistant spores that can survive higher heat treatments than most microorganisms. It also effectively reduces somatic cells by exploiting density differences. The machine processes whole milk, standardized milk, or skim milk at temperatures between 55 and 57°C. Capacity adjustments are possible by modifying the size of the top centrifugal pump.
This unit is a two-way machine featuring an internal concentration system for the bactofugate, which minimizes product losses. The bactofugate is discharged along with sludge, and depending on the discharge frequency, total product loss is approximately 0.15% of the total flow.
Included with the machine are all valves for flushing the seals and the spray bowl in the cyclone (model L-Kap), a new 37 kW motor directly connected by worm gear, an operation water module (OWM), a constant pressure valve (CPM) on the outlet of cleaned milk with a pressure transmitter to control counter pressure, and manometers on both inlet and outlet. The cyclone for sludge collection is CIP cleanable. The package also contains an operation manual with installation instructions for the foundation frame, a spare parts catalogue, and an electronic schematic.
Additional equipment includes a stainless steel water pressure increase pump with an expansion vessel to maintain constant water pressure at 3 bar with a water filter, and a steel foundation frame designed for mounting on a concrete floor. A complete set of maintenance tools is provided, including a pressing tool and ring key.
The control panel is housed in a Rittal box (80x120x30 cm) mounted on a stainless steel support frame with caster wheels for mobility. It features a 7-inch Siemens KTP700 touchscreen operation panel, a Siemens 1200 series PLC CPU programmed with TIA Portal, and a Schneider Altivar ATV930D37N4 frequency drive. The panel includes interconnecting cabling and is UL508 certified. It can operate on 60 Hz power with minor adaptations for 50 Hz.
The HMI screen allows setting bowl opening intervals and timings, displays alarm messages and failure lists, and shows an ampere meter, rotation counter, and hours counter. Control buttons include start, stop, CIP, bypass, manual discharge, and overflow time. Discharge intervals can be adjusted based on milk quality. The panel manages all water and product valves and communicates with the feed line via Ethernet.
The separator bowl and various components are made of stainless steel and appear clean and well-maintained with no visible damage or corrosion. The electric motor and metal assemblies show no signs of rust or wear, indicating good upkeep. Overall, this bactofuge separator offers a comprehensive setup for efficient milk processing with advanced control features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 122 |
| Last activity | May 12, 2026 |
Сепаратор за сметана Tetra Pak/Alfa Laval BBRPX 618 HGV
Odstředivka Tetra Pak/Alfa Laval BBRPX 618 HGV
Tetra Pak/Alfa Laval BBRPX 618 HGV Flødeudskiller
Tetra Pak/Alfa Laval BBRPX 618 HGV Milchzentrifuge
Διαχωριστής κρέμας Tetra Pak/Alfa Laval BBRPX 618 HGV
Tetra Pak/Alfa Laval BBRPX 618 HGV Cream separator
Desnatadora Tetra Pak/Alfa Laval BBRPX 618 HGV
Ecrémeuse Tetra Pak/Alfa Laval BBRPX 618 HGV
Odvajač vrhnja Tetra Pak/Alfa Laval BBRPX 618 HGV
Tetra Pak/Alfa Laval BBRPX 618 HGV Krémleválasztó
Scrematrice Tetra Pak/Alfa Laval BBRPX 618 HGV
Tetra Pak/Alfa Laval BBRPX 618 HGV Grietinėlės separatorius
Tetra Pak/Alfa Laval BBRPX 618 HGV Crème afscheider
Wirówka /separator Tetra Pak/Alfa Laval BBRPX 618 HGV
Separador de creme Tetra Pak/Alfa Laval BBRPX 618 HGV
Separator de crema Tetra Pak/Alfa Laval BBRPX 618 HGV
Tetra Pak/Alfa Laval BBRPX 618 HGV Сепаратор для сливок
Krem separator Tetra Pak/Alfa Laval BBRPX 618 HGV
Tetra Pak/Alfa Laval BBRPX 618 HGV Gräddseparator
Kaymak ayırıcı Tetra Pak/Alfa Laval BBRPX 618 HGV
EN
- Languages
English (GB)