Termopack Engineering СТА500М6 Blowmoulding machine

Manufacturer Termopack Engineering
Model СТА500М6
Year 2013
Location Belarus BY
Category Blowmoulding machines
Product id P90320026

Contact the seller

10 buyers were interested in this machine last month

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type End user
Active since 2019
Offers online 19
Last activity Aug. 14, 2019

Specifications

Volume
Extruder diameter
Nbr of heads
Nbr of stations
-------------------
Length x width x height 7900.0 mm × 2297.0 mm × 2427.0 mm
Weight2600.0 kg
Worked hours
Hours under power
State good
At local norms ---------
Status in production

Description

Thermoforming equipment automatic СТА500М6
Equipment thermoforming automatic STA-500M6 in a set, produced by LLC "Termopak-Engineering", 2013, vol. Purpose: the production of plastic packaging (caps) by thermoforming.
Specifications and equipment:
• Automatic thermoforming equipment СТА-500М6: The types of films used are polystyrene SB (HIPS), oriented polystyrene (OPS), except metallized, polypropylene (PP), polyvinyl chloride (PVC), polyethylene terephthalate (PET), PET / PE, PVS / PE. The thickness of the film used is 0.18 ... 1.0 mm, The maximum dimensions of cutting products are 430x510mm for PP, 450x550mm for other materials. The maximum height of the product (negative) is 130mm, the maximum height of the positive part of the negative-positive product is 45mm with the negative part up to 70mm, the maximum length of the cutting tool is no more than 4000mm, depending on the material. Capacity 600 ... 1500t / h depending on the thickness and type of material, the number of places in the form. Used nodes forming negative, negative-positive with a height of positive up to 45mm. Used cutting forms - punching knives, Method of formation - with compressed air followed by cutting,
Averaging adjustment time 2 hours, Film heating - non-contact, Film feeding method - step by step from a roll, Film roll width not more than 610mm, Roll outer diameter not more than 800mm (internal roll sleeve Ø 70 ... 125mm)
Roll weight 300mm, automatic coolant control. Coolant flow 40l / min. Overall dimensions 5200 ÷ 7900х2297х2427mm, weight 2600kg.
• Stacking unit ASH-500. 2 pcs. Capacity up to 25 cycles / min., Capture method of stackable vacuum products, Type of stackable products - cut thermoformed products from HIPS, SB, PP, PVC, PET. Overall dimensions 2705х1568х1518mm, weight 340kg.
Operational characteristics: power supply - three-phase alternating current 380 V, 50 Hz; compressed air - flow rate 2.925 m3 / min at 0.6 MPa, pressure -0.6 ÷ 0.8MPa.


Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Share

Contact the seller