TP03010B Thermochuck Controller & Thermochuck 6 in ( 2 Sets Available) Verified seller

Price on request

Make an offer
Manufacturer Temptronic
Model TP03010B Thermochuck Controller & Thermochuck 200mm 8 in
Year
Location Malaysia MY
Category Measure - controls - Profile projectors
Product id P2210071227
Language
ThermoChuck Systems are essential for probing, characterization and failure analysis of wafers, chips and hybrids at temperatures required for either commercial or MilSpec testing. They also allow the testing of high power chips at ambient and other temperatures.

The TP03010 Systems consist of a single rack mountable controller/heat exchanger unit and a temperature controlled vacuum chuck assembly. The systems are available with various chuck diameters in order to accommodate a variety of wafer sizes for 100mm to 200mm in diameter.

Temptronic ThermoChucks are conductive heating and cooling systems for wafer testing at temperature. Its primary use is for wafer testing in Probe Stations. It is connected to Temptronic TP03010B controller.

Temptronic advanced ThermoChuck Design minimizes low stray capacitance and high electrical resistance to ground, superior Surface Electrical Isolation: >109 Ohms at 500 VDC between surface and ground at +25°C. It has excellent chuck temperature uniformity: ±0.5°C or ±0.5% of set temperature

Features:
- Temperature range: 0° to +200°C
- DC Control System minimizes electrical noise
- Temperature Stability :±0.1°C
- Temperature Accuracy: ±0.5°C calibrated against transfer standard

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Consultant
Active since 2021
Offers online 1201
Last activity March 29, 2024

Description

ThermoChuck Systems are essential for probing, characterization and failure analysis of wafers, chips and hybrids at temperatures required for either commercial or MilSpec testing. They also allow the testing of high power chips at ambient and other temperatures.

The TP03010 Systems consist of a single rack mountable controller/heat exchanger unit and a temperature controlled vacuum chuck assembly. The systems are available with various chuck diameters in order to accommodate a variety of wafer sizes for 100mm to 200mm in diameter.

Temptronic ThermoChucks are conductive heating and cooling systems for wafer testing at temperature. Its primary use is for wafer testing in Probe Stations. It is connected to Temptronic TP03010B controller.

Temptronic advanced ThermoChuck Design minimizes low stray capacitance and high electrical resistance to ground, superior Surface Electrical Isolation: >109 Ohms at 500 VDC between surface and ground at +25°C. It has excellent chuck temperature uniformity: ±0.5°C or ±0.5% of set temperature

Features:
- Temperature range: 0° to +200°C
- DC Control System minimizes electrical noise
- Temperature Stability :±0.1°C
- Temperature Accuracy: ±0.5°C calibrated against transfer standard

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Consultant
Active since 2021
Offers online 1201
Last activity March 29, 2024

Here is a selection of similar machines

TP03010B Thermochuck Controller & Thermochuck 6 in ( 2 Sets Available)