SELF-CLEANING SLEEVES FSM-AC series
with counter-current compressed air cleaning, hopper for the continuous discharge of the filtered material into a metal bin.
Execution with sheet metal panels sp. 20/10 mm, rigidly connected with bolts and seal.
Technical characteristics of the filters:
- Type of fabric: ATEX certified antistatic polyester antistatic sleeves - 550 g / sqm - 125 mm diameter - h2.500 mm - Filtering surface to be defined based on the required air flow.
- Crossover speed ≤ 0.027 m / s for powders with particle size> 10 micron
- Compressed air consumption: approximately 16.5 Nmq / h of air at 5 - 6 bar, dried and oil-free.
- Compressed air connection with section to be checked.
- Dimensions: to be defined based on the required air flow rate
amenities:
- 1 pilot panel for cleaning cartridges with differential pressure switch and hour meter;
- 1 ATEX anti-burst panel
- N ° 1 splinker for internal washing (predisposition for anti-fire)
- 1 thermal sensor
- No. 1 calm settling chamber
- N ° 1 hopper inlet with dimensions to be checked.
- N ° 1 outlet with dimensions to be checked.
- N ° 1 model star valve to be defined based on the required air flow.
N ° 01 tank complete with valves for the entry of compressed air into the sleeves and counter-current washing of the same,
positioned in the upper part of the extractor fan above each sleeve and part of them remains outside the filter to allow easy maintenance.
This tank will be connected to the compressed air for cleaning the sleeves.
TECNO ASPIRA SNC guarantees a minimum abatement efficiency of 99% (reference paragraph 6.1 uni 11304-1: 2008).
N ° 01 CENTRIFUGAL FAN MOD. - hp 10 - kw - gpm - noise to be defined based on the required air flow.
Complete with nut, anti-spark mouthpiece, iron impeller and IE3 energy-saving motor, Exn II 3GD IP55 T135 ° C ATEX 22
ATEX certified string II B - zone 22 - Cat. 3GD T185 ° C welded back - seal B5 on motor shaft - inspection door, all from
place on the ground beside the system.
N ° 01 SHEET METAL PANEL WITH IP55 PROTECTION.
n ° 01 complete plant documentation, declaration of conformity with guarantee of return to plant standards and operating manual.

AVAILABILITY TO PROVIDE COMPLETE PLANT WITH PIPES, TRANSPORT AND ASSEMBLY.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Worked hours
Hours under power
State new
At local norms yes
Status
Client type Reseller
Active since 2010
Offers online 27
Last activity March 24, 2024

Description

SELF-CLEANING SLEEVES FSM-AC series
with counter-current compressed air cleaning, hopper for the continuous discharge of the filtered material into a metal bin.
Execution with sheet metal panels sp. 20/10 mm, rigidly connected with bolts and seal.
Technical characteristics of the filters:
- Type of fabric: ATEX certified antistatic polyester antistatic sleeves - 550 g / sqm - 125 mm diameter - h2.500 mm - Filtering surface to be defined based on the required air flow.
- Crossover speed ≤ 0.027 m / s for powders with particle size> 10 micron
- Compressed air consumption: approximately 16.5 Nmq / h of air at 5 - 6 bar, dried and oil-free.
- Compressed air connection with section to be checked.
- Dimensions: to be defined based on the required air flow rate
amenities:
- 1 pilot panel for cleaning cartridges with differential pressure switch and hour meter;
- 1 ATEX anti-burst panel
- N ° 1 splinker for internal washing (predisposition for anti-fire)
- 1 thermal sensor
- No. 1 calm settling chamber
- N ° 1 hopper inlet with dimensions to be checked.
- N ° 1 outlet with dimensions to be checked.
- N ° 1 model star valve to be defined based on the required air flow.
N ° 01 tank complete with valves for the entry of compressed air into the sleeves and counter-current washing of the same,
positioned in the upper part of the extractor fan above each sleeve and part of them remains outside the filter to allow easy maintenance.
This tank will be connected to the compressed air for cleaning the sleeves.
TECNO ASPIRA SNC guarantees a minimum abatement efficiency of 99% (reference paragraph 6.1 uni 11304-1: 2008).
N ° 01 CENTRIFUGAL FAN MOD. - hp 10 - kw - gpm - noise to be defined based on the required air flow.
Complete with nut, anti-spark mouthpiece, iron impeller and IE3 energy-saving motor, Exn II 3GD IP55 T135 ° C ATEX 22
ATEX certified string II B - zone 22 - Cat. 3GD T185 ° C welded back - seal B5 on motor shaft - inspection door, all from
place on the ground beside the system.
N ° 01 SHEET METAL PANEL WITH IP55 PROTECTION.
n ° 01 complete plant documentation, declaration of conformity with guarantee of return to plant standards and operating manual.

AVAILABILITY TO PROVIDE COMPLETE PLANT WITH PIPES, TRANSPORT AND ASSEMBLY.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State new
At local norms yes
Status

About this seller

Client type Reseller
Active since 2010
Offers online 27
Last activity March 24, 2024

Here is a selection of similar machines

Tecno Aspira Snc FSM-AC