Price on request
View priceContact us to receive an offer.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 22/04/2026 |
This listing features a TECFLAM VDPE 90 GM air intake unit designed for industrial applications. The unit operates on a 380 V three-phase plus neutral power supply at 50 Hz, with a power rating of 11 kW + 11 kW. It is designed for methane fuel combustion at a pressure of 200 mbar, delivering a heat output of 500,000 kcal/h. The air flow rate is specified at 60,000 m³/h, providing substantial ventilation capacity.
The construction of the unit includes a load-bearing metal structure made from press-formed and pre-galvanized sheet metal panels, riveted and sealed to form a reinforced box-type design. The structure is insulated with high-density rock wool to ensure thermal efficiency. The gas burner is modulating and installed on a dedicated AISI 430 stainless steel plate within an air duct. It is equipped with a combustion air fan, safety pressure switches, and a modulating pulse servomotor. The gas ramp complies with UNI EN 746-2 standards.
Temperature regulation is managed by an electronic temperature controller and a safety thermostat, allowing adjustable internal temperatures during the painting phase (20 °C) and drying phase (60 °C). Ventilation is provided by double-inlet centrifugal fans driven by three-phase electric motors (380 V, 50 Hz) with IP 55 protection, connected via belt drive and V-belts. The motors are installed outside the air circuit in accordance with safety standards.
Air pre-filtration is achieved through large-surface-area corrugated cells with galvanized sheet metal frames and electro-welded protective screens. These high-tenacity filters offer excellent regenerative capacity and flame resistance rated Class F1 according to DIN 53438. The entire system is designed for easy access to facilitate routine maintenance.
The unit shows signs of use, including multiple surface scratches and minor dents, with some wear and dirt visible on the enclosure. The motor and fan assembly appear intact with no visible damage. The machine includes a metal frame housing, a grid-like top structure, a white front panel, and an attached control box with piping on the side. The product was manufactured by TECFLAM, with labels indicating a production year of 2019, and the motor brand 'Seipee' with a model type JM132MCA B3 dated 2018. This air intake unit is made in Italy and is suitable for industrial environments requiring reliable air flow and temperature control.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
1 air intake unit
Technical specifications:
Power supply: 380 V 3-phase + neutral, 50 Hz
Power rating: 11 kW + 11 kW
Air flow rate: 60,000 m³/h
Fuel: METHANE
Pressure: 200 mbar
Heat output: 500,000 kcal/h
Design outdoor temperature: -5 °C
Internal temperature during painting phase: 20 °C (adjustable)
Internal temperature during drying phase: 60 °C (adjustable)
Construction features:
The load-bearing metal structure consists of press-formed and pre-galvanized sheet metal panels, riveted together and properly sealed to form a box-type construction, duly reinforced with special perimeter profiles housed inside the structure, which give the unit high overall rigidity. The entire unit is insulated with high-density rock wool. Modulating gas burner in an air duct, installed on a dedicated AISI 430 stainless steel plate and equipped with a combustion air fan, a set of safety pressure switches, and a modulating pulse servomotor. Gas ramp manufactured in accordance with UNI EN 746-2 standards. Temperature regulation and control are managed by an electronic temperature controller and a safety thermostat. The ventilation unit is equipped with double-inlet centrifugal fans, driven by three-phase electric motors (380 V, 50 Hz), in a sealed design (IP 55 protection class), via belt drive and V-belts. The motor is installed outside the air circuit, as required by safety standards. Pre-filtration of the incoming outdoor air is achieved using large-surface-area corrugated cells with a galvanized sheet metal frame and electro-welded protective screens galvanized on both sides. These are high-tenacity filters with excellent regenerative capacity, which provide a significantly larger filtering surface area than flat filters, thanks to the corrugated profile of the filter media. Flame resistance: self-extinguishing, Class F1 according to DIN 53438. The entire system is easily accessible for routine maintenance operations.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | April 29, 2026 |
1 air intake unit
Technical specifications:
Power supply: 380 V 3-phase + neutral, 50 Hz
Power rating: 11 kW + 11 kW
Air flow rate: 60,000 m³/h
Fuel: METHANE
Pressure: 200 mbar
Heat output: 500,000 kcal/h
Design outdoor temperature: -5 °C
Internal temperature during painting phase: 20 °C (adjustable)
Internal temperature during drying phase: 60 °C (adjustable)
Construction features:
The load-bearing metal structure consists of press-formed and pre-galvanized sheet metal panels, riveted together and properly sealed to form a box-type construction, duly reinforced with special perimeter profiles housed inside the structure, which give the unit high overall rigidity. The entire unit is insulated with high-density rock wool. Modulating gas burner in an air duct, installed on a dedicated AISI 430 stainless steel plate and equipped with a combustion air fan, a set of safety pressure switches, and a modulating pulse servomotor. Gas ramp manufactured in accordance with UNI EN 746-2 standards. Temperature regulation and control are managed by an electronic temperature controller and a safety thermostat. The ventilation unit is equipped with double-inlet centrifugal fans, driven by three-phase electric motors (380 V, 50 Hz), in a sealed design (IP 55 protection class), via belt drive and V-belts. The motor is installed outside the air circuit, as required by safety standards. Pre-filtration of the incoming outdoor air is achieved using large-surface-area corrugated cells with a galvanized sheet metal frame and electro-welded protective screens galvanized on both sides. These are high-tenacity filters with excellent regenerative capacity, which provide a significantly larger filtering surface area than flat filters, thanks to the corrugated profile of the filter media. Flame resistance: self-extinguishing, Class F1 according to DIN 53438. The entire system is easily accessible for routine maintenance operations.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 22/04/2026 |
This listing features a TECFLAM VDPE 90 GM air intake unit designed for industrial applications. The unit operates on a 380 V three-phase plus neutral power supply at 50 Hz, with a power rating of 11 kW + 11 kW. It is designed for methane fuel combustion at a pressure of 200 mbar, delivering a heat output of 500,000 kcal/h. The air flow rate is specified at 60,000 m³/h, providing substantial ventilation capacity.
The construction of the unit includes a load-bearing metal structure made from press-formed and pre-galvanized sheet metal panels, riveted and sealed to form a reinforced box-type design. The structure is insulated with high-density rock wool to ensure thermal efficiency. The gas burner is modulating and installed on a dedicated AISI 430 stainless steel plate within an air duct. It is equipped with a combustion air fan, safety pressure switches, and a modulating pulse servomotor. The gas ramp complies with UNI EN 746-2 standards.
Temperature regulation is managed by an electronic temperature controller and a safety thermostat, allowing adjustable internal temperatures during the painting phase (20 °C) and drying phase (60 °C). Ventilation is provided by double-inlet centrifugal fans driven by three-phase electric motors (380 V, 50 Hz) with IP 55 protection, connected via belt drive and V-belts. The motors are installed outside the air circuit in accordance with safety standards.
Air pre-filtration is achieved through large-surface-area corrugated cells with galvanized sheet metal frames and electro-welded protective screens. These high-tenacity filters offer excellent regenerative capacity and flame resistance rated Class F1 according to DIN 53438. The entire system is designed for easy access to facilitate routine maintenance.
The unit shows signs of use, including multiple surface scratches and minor dents, with some wear and dirt visible on the enclosure. The motor and fan assembly appear intact with no visible damage. The machine includes a metal frame housing, a grid-like top structure, a white front panel, and an attached control box with piping on the side. The product was manufactured by TECFLAM, with labels indicating a production year of 2019, and the motor brand 'Seipee' with a model type JM132MCA B3 dated 2018. This air intake unit is made in Italy and is suitable for industrial environments requiring reliable air flow and temperature control.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2023 |
| Offers online | 1 |
| Last activity | April 29, 2026 |
Въздухозаборна група TECFLAM VDPE 90 GM
sada pro přívod vzduchu TECFLAM VDPE 90 GM
TECFLAM VDPE 90 GM luftindsugningsenhed
TECFLAM-Luftzufuhrgruppe VDPE 90 GM
Σύστημα εισαγωγής αέρα TECFLAM VDPE 90 GM
TECFLAM VDPE 90 GM air intake assembly
Grupo de entrada de aire TECFLAM VDPE 90 GM
groupe d'admission d'air TECFLAM VDPE 90 GM
TECFLAM VDPE 90 GM jedinica za dovod zraka
TECFLAM VDPE 90 GM légbevezető egység
gruppo di immissione aria TECFLAM VDPE 90 GM
TECFLAM oro įsiurbimo blokas VDPE 90 GM
TECFLAM-luchtinlaatunit VDPE 90 GM
Zespół wlotu powietrza TECFLAM VDPE 90 GM
Grupo de entrada de ar TECFLAM VDPE 90 GM
grup de admisie a aerului TECFLAM VDPE 90 GM
Воздухозаборник TECFLAM VDPE 90 GM
TECFLAM VDPE 90 GM jedinica za usisavanje vazduha
Luftintagsenhet TECFLAM VDPE 90 GM
TECFLAM VDPE 90 GM hava giriş grubu
EN
- Languages
English (GB)