Sorry, this offer is no longer available on Exapro

Automatic veneer / veneer line TALLERES MARCH

Here is a selection of similar machines

Automatic veneer / veneer line TALLERES MARCH

(for the pressing of three boards simultaneously of 4 x 8 feet)

Composed by:

Motorized roller conveyors for line feed

Entrance lift table with motorized rollers

Pusher of boards for feeding of gluing machine

Blower cleaner, Gluing machine, Blender, Glue feeding pump

Track of disks, Mat for formation of boards and entrance to press

Press of solid plates MARCH WORKSHOPS- Mod. PFO 8014, number of

Series 4 / 96-15, measures plates 8000x1400mm

with 2 pumps of recirculation of oil and control of the same with 2 valves of three

ways to obtain differentiated temperature of dishes year of construction 1996.

Delivery conveyor belt press

Inlet roller path to longitudinal deburrer and alignment of boards.

Longitudinal deburring.

Interchange device at 90º.

Crosscutting deburrer.

Deburring machine output, cleaner blower and lower sander inlet

Lower Sander of 1 group

Lower sander outlet transfer and upper sander inlet

Sander upper of 2 groups

Roller table output sander with device to lift the board to see it

below, unloading table with motorized rollers, stacker pusher

Motorized roller conveyors for line discharge

The press of this line is equipped with 2 heating groups, one group for the upper plate and one for the lower one, the temperature of the plates is independent of each other and can be regulated independently.

                          

                                  

IT INCLUDES:

Inspection and Review of the line by Specialist Technicians, change

of any element that has been detected in poor condition and

it is necessary to replace for the correct operation of the line

Retreading and grinding of the 4 rollers of the gluing machine

Change of Mylar Folio

Adjustment, commissioning and verification of correct operation

of the line before delivery.

Disassembly and realization all the necessary preparations for loading

in containers

Loading in containers, lashing and protection materials.

All the mentioned works carried out by technical specialists of

TALLERES MARCH, S.A.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Plates lenght 8000 mm
Plates width 1400 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2020
Offers online 24
Last activity March 27, 2024

Description

Automatic veneer / veneer line TALLERES MARCH

(for the pressing of three boards simultaneously of 4 x 8 feet)

Composed by:

Motorized roller conveyors for line feed

Entrance lift table with motorized rollers

Pusher of boards for feeding of gluing machine

Blower cleaner, Gluing machine, Blender, Glue feeding pump

Track of disks, Mat for formation of boards and entrance to press

Press of solid plates MARCH WORKSHOPS- Mod. PFO 8014, number of

Series 4 / 96-15, measures plates 8000x1400mm

with 2 pumps of recirculation of oil and control of the same with 2 valves of three

ways to obtain differentiated temperature of dishes year of construction 1996.

Delivery conveyor belt press

Inlet roller path to longitudinal deburrer and alignment of boards.

Longitudinal deburring.

Interchange device at 90º.

Crosscutting deburrer.

Deburring machine output, cleaner blower and lower sander inlet

Lower Sander of 1 group

Lower sander outlet transfer and upper sander inlet

Sander upper of 2 groups

Roller table output sander with device to lift the board to see it

below, unloading table with motorized rollers, stacker pusher

Motorized roller conveyors for line discharge

The press of this line is equipped with 2 heating groups, one group for the upper plate and one for the lower one, the temperature of the plates is independent of each other and can be regulated independently.

                          

                                  

IT INCLUDES:

Inspection and Review of the line by Specialist Technicians, change

of any element that has been detected in poor condition and

it is necessary to replace for the correct operation of the line

Retreading and grinding of the 4 rollers of the gluing machine

Change of Mylar Folio

Adjustment, commissioning and verification of correct operation

of the line before delivery.

Disassembly and realization all the necessary preparations for loading

in containers

Loading in containers, lashing and protection materials.

All the mentioned works carried out by technical specialists of

TALLERES MARCH, S.A.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Plates lenght 8000 mm
Plates width 1400 mm
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2020
Offers online 24
Last activity March 27, 2024