This GILDEMEISTER CTX 310 Lathe was made in 2003. It is equipped with a HEIDENHAIN DataPilot 4290 control unit. The machine has a spindle speed of 5000 rpm. Its technical condition is normal with an accuracy of 0.01 mm. Throughout the years it was continuously maintained.
In 2022, the main drive card and main engine were replaced. In December 2022, the main spindle bearings were exchanged. The replacement was made with new parts. The basic machine is equipped with a hydraulic chuck. Full documentation is available.

Measurements width: 3200 mm
Measurements depth: 1715 mm
Measurements height: 1770 mm
Brand: HEIDENHAIN
Model: DataPilot 4290
Spindle speed range: 5000
Spindle motor power: 21 kW
Spindle bore: 65 mm
Number of axis: 2
X-Axis Movement: 250 mm
Z-Axis Movement: 635 mm
Workpiece weight: 110 kg
Number of turrets: 1
Number of tool slots: 12
Rotating tools: Yes
Tool taper: VDI 30
Measurements width: 3200 mm
Measurements depth: 1715 mm
Measurements height: 1770 mm
Brand: HEIDENHAIN
Model: DataPilot 4290
Spindle speed range: 5000
Spindle motor power: 21 kW
Spindle bore: 65 mm
Number of axis: 2
X-Axis Movement: 250 mm
Z-Axis Movement: 635 mm
Workpiece weight: 110 kg
Number of turrets: 1
Number of tool slots: 12
Rotating tools: Yes
Tool taper: VDI 30

Its technical condition is normal, continuously maintained. Its accuracy is 0. 01 mm.
In 2022, the main drive card and main engine were replaced in the machine.
In december 2022, the main spindle bearings were replaced in the machine. The replacement was made with new parts.Machine On 55,779h // Spindle Hours 22,367h // Full documentation available // The basic machine is equipped with a hydraulic chuck

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Turning length 450 mm
Turning Ø 210 mm
Ø above the bed 330 mm
Ø above transversing slide 260 mm
Length between centers 450 mm
Type of CNC HEIDENHAIN
X-axis 250 mm
Z-axis 635 mm
Max workpiece weight 110 kg
Spindle taper
Spindle bore 65 mm
Number of turrets 1
Number of tools on turret 12
Number of rotating tools 6
Turning speed 5000 rpm
Spindle motor power 21 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 3200.0 × 1715.0 × 1770.0
Weight 110 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible
Datasheet Gildemeister CTX 310 V1
Client type Reseller
Active since 2019
Offers online 941
Last activity March 28, 2024

Description

This GILDEMEISTER CTX 310 Lathe was made in 2003. It is equipped with a HEIDENHAIN DataPilot 4290 control unit. The machine has a spindle speed of 5000 rpm. Its technical condition is normal with an accuracy of 0.01 mm. Throughout the years it was continuously maintained.
In 2022, the main drive card and main engine were replaced. In December 2022, the main spindle bearings were exchanged. The replacement was made with new parts. The basic machine is equipped with a hydraulic chuck. Full documentation is available.

Measurements width: 3200 mm
Measurements depth: 1715 mm
Measurements height: 1770 mm
Brand: HEIDENHAIN
Model: DataPilot 4290
Spindle speed range: 5000
Spindle motor power: 21 kW
Spindle bore: 65 mm
Number of axis: 2
X-Axis Movement: 250 mm
Z-Axis Movement: 635 mm
Workpiece weight: 110 kg
Number of turrets: 1
Number of tool slots: 12
Rotating tools: Yes
Tool taper: VDI 30
Measurements width: 3200 mm
Measurements depth: 1715 mm
Measurements height: 1770 mm
Brand: HEIDENHAIN
Model: DataPilot 4290
Spindle speed range: 5000
Spindle motor power: 21 kW
Spindle bore: 65 mm
Number of axis: 2
X-Axis Movement: 250 mm
Z-Axis Movement: 635 mm
Workpiece weight: 110 kg
Number of turrets: 1
Number of tool slots: 12
Rotating tools: Yes
Tool taper: VDI 30

Its technical condition is normal, continuously maintained. Its accuracy is 0. 01 mm.
In 2022, the main drive card and main engine were replaced in the machine.
In december 2022, the main spindle bearings were replaced in the machine. The replacement was made with new parts.Machine On 55,779h // Spindle Hours 22,367h // Full documentation available // The basic machine is equipped with a hydraulic chuck

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Turning length 450 mm
Turning Ø 210 mm
Ø above the bed 330 mm
Ø above transversing slide 260 mm
Length between centers 450 mm
Type of CNC HEIDENHAIN
X-axis 250 mm
Z-axis 635 mm
Max workpiece weight 110 kg
Spindle taper
Spindle bore 65 mm
Number of turrets 1
Number of tools on turret 12
Number of rotating tools 6
Turning speed 5000 rpm
Spindle motor power 21 kW
Tailstock no
Bar feeder no
-------------------
Length x width x height 3200.0 × 1715.0 × 1770.0
Weight 110 kg
Worked hours
Hours under power
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2019
Offers online 941
Last activity March 28, 2024

Here is a selection of similar machines

GILDEMEISTER CTX 310 Lathe