Contact us to receive an offer.
| Manufacturer | Steeltech, MZ Aspiratori, Techtop |
|---|---|
| Model | impianto completo |
| Year | 2016 |
| Location | Italy
|
Primary and secondary scrubber of 100MC brand Steeltech, built in AISI 304. These are vertical axis cylindrical tanks intended for gas washing: the first tower (primary scrubber) is designed for the removal of alkaline vapors using an acidic washing solution at pH 3; the second tower (secondary scrubber) is intended for washing with an oxidative alkaline solution, operating at pH 9 and with a redox potential of about 200 mV. The towers have a diameter of 3,400 mm, a total height of about 7.5 meters and a width of 3 meters. For a maximum flow rate of 50,000 m3/h, the transit velocity is indicated as about 1.53 m/s; for a wetted zone height of about 3 meters, the contact time is reported as 2 seconds.
Included components and accessories mentioned in the description:
- Industrial fan GF 1250/4 from MZ Aspiratori (centrifugal fan, year indicated: 2014).
- Electric motor brand Techtop.
- Containers for reagents.
- Control panel.
Note on use: the system is described for the sequential treatment of gases through two washing stages with solutions at different pH (acidic and oxidative alkaline) and with redox potential control in the second tower. All numerical specifications (dimensions, flow rate, pH, redox, contact times, fan year) are taken from the provided description. No additional information is given regarding operational status, any tests or certifications; for this information and for any technical and operational verifications it is recommended to request documentation or direct inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
100m3 PRIMARY AND SECONDARY SCRUBBER by Steeltech. Material: AISI 304
Vertical cylindrical tanks called primary and secondary scrubbers. The first tower is designed to remove alkaline vapors with an acidic scrubbing solution at pH 3. The second tower, on the other hand, is designed to scrub with an oxidative alkaline solution. It operates at a pH of 9 and a redox potential of approximately 200 mV. The towers are made of AISI 304 with a diameter of 3,400 mm and a total height of approximately 7.5 meters by 3 meters. The transit velocity, for a maximum flow rate of 50,000 m3/h, is approximately 1.53 m/s and a contact time of 2 seconds for a wetted zone height of approximately 3 meters.
INDUSTRIAL FAN. GF 1250/4 by MZ Aspiratori.
Centrifugal fan from 2014
ELECTRIC MOTOR. Techtop
REAGENT CONTAINERS.
CONTROL PANEL.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Sept. 15, 2026 |
100m3 PRIMARY AND SECONDARY SCRUBBER by Steeltech. Material: AISI 304
Vertical cylindrical tanks called primary and secondary scrubbers. The first tower is designed to remove alkaline vapors with an acidic scrubbing solution at pH 3. The second tower, on the other hand, is designed to scrub with an oxidative alkaline solution. It operates at a pH of 9 and a redox potential of approximately 200 mV. The towers are made of AISI 304 with a diameter of 3,400 mm and a total height of approximately 7.5 meters by 3 meters. The transit velocity, for a maximum flow rate of 50,000 m3/h, is approximately 1.53 m/s and a contact time of 2 seconds for a wetted zone height of approximately 3 meters.
INDUSTRIAL FAN. GF 1250/4 by MZ Aspiratori.
Centrifugal fan from 2014
ELECTRIC MOTOR. Techtop
REAGENT CONTAINERS.
CONTROL PANEL.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Primary and secondary scrubber of 100MC brand Steeltech, built in AISI 304. These are vertical axis cylindrical tanks intended for gas washing: the first tower (primary scrubber) is designed for the removal of alkaline vapors using an acidic washing solution at pH 3; the second tower (secondary scrubber) is intended for washing with an oxidative alkaline solution, operating at pH 9 and with a redox potential of about 200 mV. The towers have a diameter of 3,400 mm, a total height of about 7.5 meters and a width of 3 meters. For a maximum flow rate of 50,000 m3/h, the transit velocity is indicated as about 1.53 m/s; for a wetted zone height of about 3 meters, the contact time is reported as 2 seconds.
Included components and accessories mentioned in the description:
- Industrial fan GF 1250/4 from MZ Aspiratori (centrifugal fan, year indicated: 2014).
- Electric motor brand Techtop.
- Containers for reagents.
- Control panel.
Note on use: the system is described for the sequential treatment of gases through two washing stages with solutions at different pH (acidic and oxidative alkaline) and with redox potential control in the second tower. All numerical specifications (dimensions, flow rate, pH, redox, contact times, fan year) are taken from the provided description. No additional information is given regarding operational status, any tests or certifications; for this information and for any technical and operational verifications it is recommended to request documentation or direct inspection.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Sept. 15, 2026 |
Първичен и вторичен скрубер Steeltech 100m3. Изработен от материал ASI 304 с прикрепена система за екстракция.
Primární a sekundární pračka Steeltech o objemu 100 m3. Vyrobeno z materiálu ASI 304 s připojeným odsávacím systémem.
Steeltech 100m3 primær og sekundær scrubber. Fremstillet af ASI 304 materiale med et påmonteret udsugningssystem.
Steeltech Primär- und Sekundärwäscher mit einem Volumen von 100 m³. Gefertigt aus Edelstahl ASI 304 mit angeschlossenem Absaugsystem.
Πλυντρίδα πρωτογενούς και δευτερογενούς καθαρισμού Steeltech 100m3. Κατασκευασμένη από υλικό ASI 304 με ενσωματωμένο σύστημα εξαγωγής.
Steeltech 100m3 primary and secondary scrubber. Made of ASI 304 material with an attached extraction system.
Depurador primario y secundario Steeltech de 100 m³. Fabricado en material ASI 304 con sistema de extracción incorporado.
Laveur primaire et secondaire Steeltech de 100 m³. Fabriqué en acier inoxydable ASI 304 avec système d'extraction intégré.
Steeltech primarni i sekundarni scrubber od 100m3. Izrađen od ASI 304 materijala s priloženim sustavom za ekstrakciju.
Steeltech 100m3-es elsődleges és másodlagos mosóberendezés. ASI 304 anyagból készült, csatlakoztatott elszívórendszerrel.
SCRUBBER PRIMARIO E SECONDARIO DA 100MC della Steeltech. Materiale ASI 304 con annesso impianto di aspirazione
„Steeltech“ 100 m3 talpos pirminis ir antrinis šveitiklis. Pagamintas iš ASI 304 medžiagos su pritvirtinta ištraukimo sistema.
Steeltech primaire en secundaire gaswasser met een capaciteit van 100 m³. Gemaakt van ASI 304-materiaal met een aangebouwd afzuigsysteem.
Skruber wstępny i wtórny Steeltech o pojemności 100 m3. Wykonany z materiału ASI 304 z dołączonym systemem odsysania.
Lavador primário e secundário Steeltech de 100m³. Fabricado em aço inoxidável ASI 304 com sistema de extração integrado.
Scruber primar și secundar Steeltech de 100 m³. Fabricat din material ASI 304 cu sistem de extracție atașat.
Скруббер Steeltech объемом 100 м³ (первичный и вторичный). Изготовлен из материала ASI 304 с прикрепленной системой отвода сточных вод.
Steeltech primarni i sekundarni skruber od 100m3. Napravljen od ASI 304 materijala sa priključenim sistemom za ekstrakciju.
Steeltech 100m3 primär- och sekundärskrubber. Tillverkad av ASI 304-material med ett anslutet utsugssystem.
Steeltech 100m3 birincil ve ikincil yıkayıcı. ASI 304 malzemeden üretilmiş olup, entegre bir emme sistemine sahiptir.
EN
- Languages
English (GB)