Stama MC 326/TWIN Machining center - vertical

Manufacturer Stama
Model MC 326/TWIN
Year 2013
Location Israel IL
Category Machining centers - vertical
Product id P71107118

€173,000

Contact the seller

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type User – small or medium company
Active since 2016
Offers online 2
Last activity Dec. 7, 2018

Specifications

Axis X 520 mm
Axis Y 360 mm
Axis Z 360 mm
Rotary table (4th axis) no
Type of CNC Control System FANUC 31i-A5
Table length 700 mm
Table width 350 mm
Max. part weight 900 kg
Spindle taper ISO 40
Max. spindle speed 10500 rpm
Spindle motor power 15 kW
-------------------
Weight 5300 kg
Worked hours
Hours under power
State like new
At local norms ---------
Status

Description

Stama MC 326/TWIN Machining center - vertical

This is German manufacturer with German quality, very expensive machine and almost new.

Machining Centre STAMA MC 326/TWIN
Design as follows:
Spindle distance A: 266 mm
Traverse Ranges
X axis 520 mm
Y axis 360 mm
Z axis 360 mm
Feed Thrust
X-Y axis 4000 N
Z axis 8000 N

Traverse Rates
Rapid traverse X-Y- and Z-axis 60 m/min.
Feed rate in X-Y- and Z-axis 1-10000 mm/min
Axis dynamics: (m/sek2) max. X=5; Y=8; Z=12

Swivel Table
Swivel drive pneumatically controlled.
Pneumatically pull down in crown gear
Clamping area 2 x 700 x 350 mm
Distance table-spindle nose min./max. 305/665 mm
Number and size of T-slots per
clamping area: 2 x 14 H12
Number and diameter of location holes per
clamping area: 2 x ø16 F7
Acceptable table load 2 x 450 kg
Indexing time approx. 1,9 sec.

Spindle Unit
Tool register ISO 40
Draw bar pulling force 7000 N
Spindle diameter 65 mm
Spindle speed:
Standard 10500 rpm

Mainspindle Drives 15KW - FANUC
Torque constant up to 1500 rpm:
At 100% continious duty 60 Nm; at 20% cont. duty 96 Nm
Driving power over 1500 rpm:
At 100% cont. duty 9,5 KW; at 20% cont. duty 15 KW

Tool Magazine
Tool places standard 2 x 24
Tool diameter maximum:
all places used ø 88 mm
with empty adjacent tool place
ø 140 mm (lenght between 80mm and 210 mm)
Tool length max. 300 mm
Tool register DIN 69871-A ISO 40
Retention knob DIN 69872-19
Tool weight max. 5 kg
Chip-to-chip time approx. 2,4 sec.

Tool Inserting Station
Menu guided tool data management over the main
control panel of the nc-control.
To each tool are assigned direct:
Siemens: 32-digit tool ident. no.
in numerical or alphanumerical format.
Fanuc: 8-digit tool ident. no.
in numerical format.
For length and radius offsets
Incl. buffer station for constant short
Chip-to-Chip times.

Measuring System
X-Y axis, digital pulse coder
(Fanuc cyclic absolut, Siemens absolut)
Absolute measuring value processing resolution 0.001 mm
pitch error compensation is executed
Z-axis lienear scale
Installation Data
Space required for machine/equipment approx. 10 m2
Weight 5300 kg
Control voltage 24 V DC
Valve voltage 24 V DC
Installation conditions:
Working voltage 3x400 V ±10%; 50Hz; N/PE.
Connected rating machine 50 KVA
Fuse before master switch 3 x 80 A
Connected cross section 4 x 25 mm2
Required air pressure min. 6 bar
Clean air conditions acc. to ISO 8573-1 class 4
Supply pipe inside dia. min. 13 mm.
The machining centre is equipped with electrical
and mechanical components which guarantee the
function on a temperature range between 18°C and 35°C.

Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Share

Contact the seller