This HAAS VM3 Vertical Machining center was manufactured in the year 2017 in the United States. It is equipped with a HAAS control unit. The machine has a spindle speed of 12000 rpm.

CNC: HAAS
Spindle speed range: 12000 rpm
Spindle motor power: 22.4 kW
Tool taper: 40

1016 x 660 x 635 mm
Vector drive
Inline direct drive
Tool magazine 24+1 side mounted
710 ipm (18. 0 m/min) rapid strokes
Automatic chip drainage system
Remote control (wheel) on the cable
Automatic air gun
Hsm, ethernet interface, macros
Rotation and scaling
Programmable coolant nozzle
Early module network voltage drop detection
750 mb program memory
15" lcd color monitor
Usb port
Memory lock
Slicing without head for compensation and cooling system with volume reservoir 55-gallon (208 liters)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 1016 mm
Axis Y 660 mm
Axis Z 635 mm
Rotary table (4th axis) no
Type of CNC Haas
Number of tool pockets 25
Spindle taper 40
Max. spindle speed 12000 rpm
Spindle motor power 22.4 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 947
Last activity March 29, 2024

Description

This HAAS VM3 Vertical Machining center was manufactured in the year 2017 in the United States. It is equipped with a HAAS control unit. The machine has a spindle speed of 12000 rpm.

CNC: HAAS
Spindle speed range: 12000 rpm
Spindle motor power: 22.4 kW
Tool taper: 40

1016 x 660 x 635 mm
Vector drive
Inline direct drive
Tool magazine 24+1 side mounted
710 ipm (18. 0 m/min) rapid strokes
Automatic chip drainage system
Remote control (wheel) on the cable
Automatic air gun
Hsm, ethernet interface, macros
Rotation and scaling
Programmable coolant nozzle
Early module network voltage drop detection
750 mb program memory
15" lcd color monitor
Usb port
Memory lock
Slicing without head for compensation and cooling system with volume reservoir 55-gallon (208 liters)

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 1016 mm
Axis Y 660 mm
Axis Z 635 mm
Rotary table (4th axis) no
Type of CNC Haas
Number of tool pockets 25
Spindle taper 40
Max. spindle speed 12000 rpm
Spindle motor power 22.4 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 947
Last activity March 29, 2024

Here is a selection of similar machines

HAAS VM3 Machining center - vertical