Machine's specifications - Weinig U17 Used machines

Manufacturer	Weinig
Model	U17
Category	Moulders - multihead moulding machines

4 FACES MOULURIERE WEINIG U17 d occasion 7 PO 180x120 mm Sold

Year:

Composition : - Arbre inférieur dégau - Toupie droite - Toupie gauche - Toupie droite - Arbre supérieur rabot - Arbre inférieur dégau - Arbre universel Variateur de vitesse: 6,5 à 62 m/mn. Graissage centralisé. Règleur de fers fourni. Machine propre et fonctionnelle.

Price on request

France

Used Weinig U17/N Moulder Sold

Year: 1980

Moulder Weinig - Type: U17 / N - Year: 1980 - Number of heads: 7 - Layout heads: D / P / L / R / G / D / U - Pneumatic clamps - Feed speed 36m - The rollers in the machine bed - Drive feed for cardan shafts

Price on request

Poland

Weinig U17A Moulder Sold

Year:

Composition of shafts: - Inferior: 3 KW - Right:3 KW - Left 4 KW - Right: 4 KW - Superior: 4 kW - Inferior: 3 KW - Universal: 3 KW - working table 170 mm - Chain feed

Price on request

Italy

Weinig U17A 7-head feed through moulder with hopper feed Sold

Year: 1981

7-head feed through moulder with hopper feed Year 1981 Working Capacity: 6-3/4” x 4-3/4” Head sequence: 1. Groover/Surface Planer- 5HP (4kw) 2. 1st Right Side- 5HP (4kw) 3. Left Side- 10HP- (7.5kw) 4. 2nd Right Side- 7HP (5.5kw) 5. Top- 10HP (7.5kw) 6. Bottom- 7HP (5.5kw) 7. Universal- 5HP (4kw) 7 Spindles: All 1-1/2" diameter with cutterhead speed of 6,000 RPM Feed: Cardan (chainless) Feed drive- 5 HP (4kw) 18 to 118 FPM Motorized raise-and-lower of overhead feed beam: Lift …

Price on request

USA

Weinig U17 Used multihead moulder Sold

Year: 1984

Price on request

Poland

AUTOMATIC MOULDER - WEINIG U17A - 8 spindles - grooved worktable Sold

Year: 1985

AUTOMATIC MOULDER - WEINIG U17A machine overhauled in 2013 year of manufacuring 1985 serial number 14723-3782 motor 1 horizontal lower KW 4 motor 2 vertical dx KW 4 motor 3 vertical sx KW 10 motor 4 vertical sx KW 7,5 motor 5 horizontal upper KW 7,5 motor 6 horizontal lower KW 4 motor 7 horizontal upper KW 5.5 motor 8 horizontal lower ONLY PREDISPOSITION motor 9 universal 360° KW 7,5 feeding device M' 6-36 pneumatice pressure cardanic transmission grooved worktable …

Price on request

Italy

Weinig U17A Used multihead moulder Sold

Year: 1979

4 molded faces with 6 trees Max width 170mm Max height 120mm 6 Shafts dia.40mm profiling of which 1 tree dégau 1 right spinning top 1 left topper 2nd spinning to the right 1 tree planing above 1 universal tree Training with mechanical variator Automatic trainer with mechanical speed variator

Price on request

France

Used WEINIG U17A Wood milling machine Sold

Year:

Price on request

Italy

Used WEINIG U17 Moulder Sold

Year:

Price on request

France

Weinig U17 N Moulder Sold

Year:

7 shafts

Price on request

France

WEINIG U17A Grinding Machine Sold

Year: 1981

Sanding & Polishing 9 Shafts grinding machine, shaft diameter 40 mm: - 1° shaft: lower kW 4 - 2° shaft: right kW 3 - 3° shaft: left kW 5.5 - 4° shaft: right kW 5.5 - 5° shaft: upper kW 5.5 - 6° shaft: lower kW 4 - 7° shaft: upper kW 5.5 - 8° shaft: lower kW 4 -9° shaft: universal kW 4 motorized feeding system See photos

Price on request

Italy

Used Weinig U17 A Moulder Sold

Year:

Price on request

Poland

OCCASIONE: SCORNICIATRICE WEINIG U17A Sold

Year: 1980

Moulder 8 spindles 170x120 mm WEINIG mod. U17A, with CARDANIC FEEDING, good state, year 1980, - spindles : bottom Hp 5,5 - right Hp 5,5 - left Hp 7,5 - right Hp 5,5 - top Hp 7,5 - bottom Hp 5,5 - top Hp7,5 - universal Hp 5,5 - feeding CARDANIC type - PNEUMATIC PRESSURE of feeding rollers - feed speed with variator 4-24 mt/min - motorized lifting of feed beam.

Price on request

Italy

Used WEINIG U17A Used multihead moulder Sold

Year: ~ 1980

WEINIG U17A moulder with 5 shafts: - useful working measures 170x120mm - variable feed speed - complete with 4 knife heads Trees: - below - right - left - over it - universal

Price on request

Italy

Weinig U17A Used multihead moulder Sold

Year: 1978

5 headers 5 heads - WEINIG 5 U17A Max width of the workpiece 18cm - max height of workpiece 13cm - 5 spindles: 1) horizontal bottom 18cm; 4kW 2) vertical right 13cm; 3kW 3) vertical left 13cm; 5.5 kW 4) vertical right 13cm; 7.5 kw 5) horizontal top 18cm; 5.5 kW - All heads are adjustable up / down - spindle diameter 4cm - shafts pulling 5pc gear including 2 double - pulling rollers, pulling rubber, 2pcs - length of …

Price on request

Poland

Working width	170 mm
Working height	120 mm
Nbr of shafts	7
Shafts diameter	40 mm
Sound proof cabin
Feeding table length	170 mm
Feed speed	36 m/min
Engine power	kW
-------------------
Length x width x height	3900.0 × 1500.0 × 1360.0
Weight	2000 kg

Weinig U17

Here is a selection of similar machines

Here is a selection of similar machines

Similar machines sold on our website

Categories

Menu

Are you looking for this machine?