Double squaring - Independent machine (or 1st and / or 2nd line) No transmission bar (Master & Slave system) Thickness of rolled edges (min / max) mm 0.3 to 3 Panel thickness (min / max) mm 8-60 Working Width (min / max) mm 236-3300 CNC / Software ICOS OPEN variable feed speed (m / min) 10 - 50 THE SQUARING (for each side): Moulder anti splinter 75.30.0.084 (Kw 4.5 x 1) Chippers 75.30 (Kw 6,6 x 2) Moulder Grinding 75.30.0.084 (Kw 4.5 x 1) EDGE BANDING (for each side): sprayer group (for anti adhesion improver liquid), lamps of pre-heating, 04.1570 bonding system (glue Thermo-fuse + Pre melter), Pressure zone border Roll Holder (for No. 2 coils) Trimming Group (0 ° -25 °) 08:42 (Kw 0,2 x 2) Maximum operating speed: 32 m / min Trimmers Group 08,055 (approx KW 0.66 x 2) tiltable Multifunction Group (gleaning and rounding) MFA (approx Kw 0.66 x 2) Scraping-board 08 515 Group Scraping glue 08,517 Group # 2 Moulder 75.30 for quarries and rinure (ca. 4.5 kW x 2) OPTIONAL: finishing unit with spheres
Technical data: Machine 1 Edge banding and post processing with adjustable 0-line. Unit carrier for glueing and processing units motoric adjustable from transportchain. Working width: max. 1300 mm min. workpiece projection from chain, each side: approx. 40 mm max. workpiece projection from chain, each side: approx. 80 mm min. troughfeed width at workpiece projection of 40 mm: approx. 240 mm min. strip length of coil material: approx. 260 mm min. strip height of coil material: approx. 14 mm max. strip thickness of coil material: 3 mm Workpiece length min.: approx. 320 mm Workpiece thickness min.: approx. 10 mm Workpiece thickness max.: approx. 45 mm Throughfeed speed: approx. 16-80 m/min. Unit control: by line control integrated in IMATRONIC-150 Width adjustment: travel speed approx. 2,8 m/min. Infeed device, 3-fold for forwarding of the workpiece to the stop, while length-processing and automatic feeding. Stop on the fix machine side horizontal movable by NC-axis. Each 1x left+right unit carrier horizontal motorical moveable with each 1x milling support with Perske motor 5,5/8,0 kW 50/100 Hz Motor shaft-Ø 40mm x 75mm for Hydro-Format-tools Elektronic positioning for a stepless adjustment of the workpiece pojection on both sides. 1. Unit carrier by NC-axis 2. Unit carrier in front …
* SQUARING COMBINED DOUBLE. GENERAL SPECIFICATIONS * Industrial machine with robust construction * Can be used as a first or second line machine SYSTEM AND OPTIONALS OF THE PANEL HANDLING * Running driving with scrolling through bearings * Chain extension length in entry 1300 mm (distance from the beginning of the track to the machine cabinet) * top pression unit made by motorized rubbered belt * Top height adjustable from the control system automatically * adjusting in continuos feeding with regulation in automatic by numerical control WORKING UNITS oN THE SQUARING SIDE FOR EACH SIDE * shaping unit splinter - out intervention * * shaping unit double hogging upper and lower GLUING UNIT, LOADING aND PRESSURE oF THE EDGE * lamp zone to pre-heat the side of the panel * multiple magazine for coils with nr. 6 positions, to automatically change the edge type * Hot-melt polyurethane glue and premelter * Roller set to press the edge on straight profiles - nr. 1 + 3 * pressure rollers cutting unit with 2 motors to cut the excess edge on the front and back of the panel. - Motors power 0.66 KW 12,000 (rev / min) * * trimming unit overlapped …
Complete line consists of: Carrier store - position 1 Turntable position 2 Used complete line for edging COMBIMA, 1,5 -sided, position 3 width max ca. 2000 mm Adjusted for horisontal or vertical treatment 180 ' Angle carrier - position 4 Bander 1 sided IMA Cleaning machine Wandres, cleans upper and lower surface General overhaul in 2003
Unilateral IMA Combima with: Include milling unit Slanted gluing unit (18 °) with twin roll magazine, Vorschmelzeinheit Hats with 2 motors at top pressure Flush trimming with 2 motors Chamfer milling with 2 motors Radius milling with 2 motors Rounding unit 4 motors with 2 x Nutaggregate with NC controlled adjustment axes Profile scraping unit Flat scraping unit Freespace 500 mm 2 x 2 Schwabbelmotore 1 IMA Rollier smoothness aggregate Sanding unit for straight edges, oscillating 1 sanding unit IMA for small radii Angle 1 sanding unit IMA for small radii from above 1 Heesemann Profile sanding aggregate M2 Angle 1 Heesemann profile sanding unit M2 from above
Germany
1999
Italy
Poland
EN
- Languages
English (GB)
English (US)
Français
Čeština
Español
Deutsch
Italiano
Polski
Русский
Türkçe
Português
Magyar
Hrvatski
Български
Nederlands
Ελληνικά
Dansk
Svenska
Română
Crpski
Lietuvių